Page 1
)
θ
(BR)
Please click here to visit our online spice models database.
Features
• Two Series Diode Circuits Connect to Form Full Wave Bridge
• Fast Switching Speed
• Low Capacitance
• 400V Reverse Breakdown Voltage Rating
• Lead Free/RoHS Compliant Version (Note 3)
• "Green" Device (Note 4)
NEW PRODUCT
TOP VIEW
MMBD5004BRM
HIGH VOLTAGE SURFACE MOUNT SWITCHING DIODE ARRAY
Mechanical Data
• Case: SOT-26
• Case Material: Molded Plastic, "Green" Molding Compound,
Note 4. UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Matte Tin Finish annealed over Copper leadframe
(Lead Free Plating). Solderable per MIL-STD-202, Method 208
• Polarity: See Diagram
• Marking Information: See Page 2
• Ordering Information: See Page 2
• Weight: 0.016 grams (approximate)
SOT-26
AC
C1C
1
A1A
TOP VIEW
Internal Schematic
2
AC
2
2
Maximum Ratings @T
= 25°C unless otherwise specified
A
Characteristic Symbol Value Unit
Repetitive Peak Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Forward Continuous Current
Peak Repetitive Forward Current
Non-Repetitive Peak Forward Surge Current @ t = 1.0ms
@ t = 1.0s
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation (Note 1)
Thermal Resistance Junction to Ambient Air (Note 1)
Operating and Storage Temperature Range
Electrical Characteristics @T
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 2)
Forward Voltage
Reverse Current (Note 2)
Total Capacitance
Reverse Recovery Time
Notes: 1. Part mounted on polyimide substrate PC board with recommended pad layout, which can be found on our website at
MMBD5004BRM
Document number: DS30714 Rev. 4 - 2
http://www.diodes.com/datasheets/ap02001.pdf.
2. Short duration pulse test used to minimize self-heating effect.
3. No purposefully added lead.
4. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
A
V
RRM
V
RWM
V
V
R(RMS
I
I
FRM
I
FSM
P
R
T
J,TSTG
= 25°C unless otherwise specified
V
R
V
⎯
F
I
R
C
T
t
rr
1 of 5
www.diodes.com
R
F
D
JA
400
⎯
⎯
⎯ ⎯
400 V
350 V
247 V
225 mA
625 mA
2.0
1.0
350 mW
357
-65 to +150
⎯ ⎯
⎯
0.87
⎯
⎯
⎯
⎯
1.0
1.25
100
100
5
V
V
nA
μA
μA
0.7 2.0 pF
50 ns
A
°C/W
°C
IR = 150μA
= 20mA
I
F
I
= 100mA
F
= 200mA
I
F
V
= 240V
R
V
= 240V, TJ = 150°C
R
V
= 360V
R
VR = 0V, f = 1.0MHz
I
= IR = 30mA,
F
I
= 3.0mA, RL = 100Ω
rr
December 2009
© Diodes Incorporated
Page 2
P, P
O
R
PATIO
N
TANT
O
U
O
RWARD CUR
RENT
TANT
O
US R
R
CUR
RENT
500
Note 1
1,000
(mA)
MMBD5004BRM
NEW PRODUCT
µ
(A)
SE
EVE
ANE
400
(mW)
300
DISSI
200
WE
D
100
1,000
0
0
40
T , AMBIENT TEMPERATURE, (°C)
A
80
120
Fig. 1 Power Derating Curve, Total Package
100
10
1
0.1
0.01
160
T = 150 CA°
T = 125 CA°
T = 85CA°
T = 25CA°
200
S F
ANE
F
I, INS
T
C , TOTAL CAPACITANCE (pF)
100
10
T = 150CA°
T = 125CA°
1
T = 25CA°
T = -55CA°
0.1
0 0.2 0.4 0.6 0.8 1.0 1.2
V , INSTANTANEOUS FORWARD VOLT AGE (V)
F
Fig. 2 Typical Forward Character istics, Pe r Element
1.4
1.2
f = 1.0MHz
1.0
0.8
0.6
0.4
0.2
T = 85CA°
I, INS
R
0.001
0 50 100 150 200 250 300 350 400
V , INSTANTANEOUS REVERSE VOLT AGE (V)
R
Fig. 3 Typical Reverse Characteristics, Per Element
T = -55CA°
0
048121620
V , DC REVERSE VOLTAGE (V)
Fig. Total Capacitance vs. Reverse Voltage, Per Element
4
R
Ordering Information (Note 5)
Part Number Case Packaging
MMBD5004BRM-7 SOT-26 3000/Tape & Reel
Notes: 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
KJB
Date Code Key
Year 2009 2010 2011 2012 2013 2014 2015
Code W X Y Z A B C
Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Code 1 2 3 4 5 6 7 8 9 O N D
MMBD5004BRM
Document number: DS30714 Rev. 4 - 2
www.diodes.com
KJB = Product Type Marking Code
YM = Date Code Marking
YM
Y = Year (ex: W = 2009)
M = Month (ex: 9 = September)
2 of 5
December 2009
© Diodes Incorporated
Page 3
Package Outline Dimensions
NEW PRODUCT
K
J
Suggested Pad Layout
MMBD5004BRM
A
SOT-26
Dim Min Max Typ
B C
H
M
C2
L
C2
C1
D
G
Z
Y
X
A 0.35 0.50 0.38
B 1.50 1.70 1.60
C 2.70 3.00 2.80
D
⎯ ⎯
H 2.90 3.10 3.00
J 0.013 0.10 0.05
K 1.00 1.30 1.10
L 0.35 0.55 0.40
M 0.10 0.20 0.15
0° 8°
α
All Dimensions in mm
Dimensions Value (in mm)
Z 3.20
G 1.60
X 0.55
Y 0.80
C1 2.40
C2 0.95
0.95
⎯
MMBD5004BRM
Document number: DS30714 Rev. 4 - 2
3 of 5
www.diodes.com
December 2009
© Diodes Incorporated
Page 4
Application Examples
NEW PRODUCT
MMBD5004BRM
MMBD5004BRM
MMBD5004BRM
Document number: DS30714 Rev. 4 - 2
4 of 5
www.diodes.com
December 2009
© Diodes Incorporated
Page 5
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorize d application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
NEW PRODUCT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2009, Diodes Incorporated
www.diodes.com
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
IMPORTANT NOTICE
LIFE SUPPORT
MMBD5004BRM
MMBD5004BRM
Document number: DS30714 Rev. 4 - 2
5 of 5
www.diodes.com
December 2009
© Diodes Incorporated
Loading...