
Data Sheet
SCHOTTKY BARRIER RECTIFIER APD360
Features
Applications
• Low Forward Voltage Drop
• Very Small Conduction Losses
• High Surge Capability
• Surge Overload Rating to 80A Peak
DO-27 DO-27 (L) DO-214AC
Figure 1. Package Types of APD360
• Low Voltage High Frequency Inverters
DC-DC Converters
•
• Free Wheeling
• Polarity Protection
Aug. 2011 Rev. 1. 8 BCD Semiconductor Manufacturing Limited
1

Data Sheet
SCHOTTKY BARRIER RECTIFIER APD360
Pin Configuration
VP Package VPL Package
(DO-27) (DO-27 (L))
Cathode line by
Cathode Anode
marking
Cathode line
by marking
Cathode Anode
VR Package
(DO-214AC)
Cathode line by
marking
Cathode Anode
Figure 2. Pin Configuration of APD360 (Top View)
Aug. 2011 Rev. 1. 8 BCD Semiconductor Manufacturing Limited
2

Data Sheet
SCHOTTKY BARRIER RECTIFIER APD360
Ordering Information
APD360 -
Circuit Type
Package
VP: DO-27
VPL: DO-27 (L)
VR: DO-214AC
E1: Lead Free
G1: Green
Blank: Bulk
TR: Ammo or Ta
e & Reel
Package
DO-27
DO-27 (L)
DO-214AC
Temperature
Range
-65 to 125°C
-65 to 125°C
-65 to 125°C
Part Number Marking ID
Lead Free Green Lead Free Green
APD360VP-E1 APD360VP-G1 D360VP 360VPG Bulk
APD360VPTR-E1 APD360VPTR-G1 D360VP 360VPG Ammo
APD360VPL-E1 APD360VPL-G1 D360VP 360VPG Bulk
APD360VRTR-G1 360VRG
Packing
Type
Tape &
Reel
BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant.
Products with “G1” suffix are available in green packages.
Aug. 2011 Rev. 1. 8 BCD Semiconductor Manufacturing Limited
3

Data Sheet
SCHOTTKY BARRIER RECTIFIER APD360
Absolute Maximum Ratings (T
=25°C unless otherwise noted) (Note 1)
A
Parameter Symbol Value Unit
Maximum Repetitive Peak Reverse
Voltage
Maximum DC Blocking Voltag e VDC 60 V
60 V
V
RRM
Maximum RMS Voltage V
Average Rectified Forward Current
0.375” (9.5mm) Lead Length
42 V
RMS
3.0 A
I
F (AV)
Non-repetitive Peak Forward Surge
Current 8.3ms Single Half Sine-wave
80 A
I
FSM
on Rated Load
Operating Junction Temperature
Range
Storage Temperature Range T
-65 to 125
T
J
-65 to 150
STG
°C
°C
Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. These are stress ratings only, and functional operation of the device at these or any other conditions
beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute
Maximum Ratings” for extended periods may affect device reliability.
Thermal Characteristics (T
=25°C unless otherwise noted)
A
Parameter Symbol Value Unit
DO-27/
T ypica l Ther mal Resistance
θ
JA
DO-27 (L)
DO-214AC 75
Electrical Characteristics (T
=25°C unless otherwise noted)
A
Parameter Symbol Min Typ Max Units
40
°C/W
Forward Voltage @ IF=3.0A VF 0.68 V
Reverse Current @
Rated V
(Note 2)
R
TA=25°C
=100°C
T
A
I
R
0.5
mA
10
Note 2: Pulse Test: 300µs pulse width, 1.0% duty cycle.
Aug. 2011 Rev. 1. 8 BCD Semiconductor Manufacturing Limited
4

Data Sheet
SCHOTTKY BARRIER RECTIFIER APD360
Typical Performance Characteristics
(T
=25°C unless otherwise noted)
A
5
4
3
2
100
10
1
1
Average Forward Recitified Current Amperes
0
0 20 40 60 80 100 120 140 160
Ambient Temperature (oC)
0.1
Instantaneous Forward Current (A)
0.01
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
Instantaneous Forward Voltage (V)
250C
1250C
1500C
Figure 3. Forward Current Derating Curve
Figure 4. Typical Instantaneous Forward Characteristics
90
80
70
60
50
40
30
20
Peak Forward Surge Current (A)
10
0
110100
Figure 5. Maximum Non-Repetitive Surge Current Figure 6. Typical Reverse Characteristics
Number of Cycle at 60Hz
100000
10000
1000
100
10
Instantaneous Reverse Current (µA)
1
0 10203040506070
Instantaneous Reverse Voltage (V)
250C
1250C
1500C
Aug. 2011 Rev. 1. 8 BCD Semiconductor Manufacturing Limited
5

Data Sheet
SCHOTTKY BARRIER RECTIFIER APD360
Typical Performance Characteristics (Continued)
400
100
Junction Capacitance (pF)
10
110
Figure 7. Typical Junction Capacitance
Reverse Voltage
60
Aug. 2011 Rev. 1. 8 BCD Semiconductor Manufacturing Limited
6

Data Sheet
SCHOTTKY BARRIER RECTIFIER APD360
Mechanical Dimensions (Continued)
DO-27 (L) Unit: mm(inch)
8.500(0.335)
9.500(0.374)
Cathode line
by marking
6.000(0.236)
7.000(0.276)
19.500(0.768)
20.500(0.807)
5.000(0.197)
5.600(0.220)
DIA.
1.200(0.047)
1.300(0.051)
Aug. 2011 Rev. 1. 8 BCD Semiconductor Manufacturing Limited
8

Data Sheet
SCHOTTKY BARRIER RECTIFIER APD360
Mechanical Dimensions (Continued)
DO-214AC Unit: mm(inch)
Cathode line by
marking
1.900(0.075)
2. 290(0. 090)
0. 760(0. 030)
1.520(0.060)
3. 990(0. 157)
4. 600(0. 181)
0.152(0. 006)
0.305(0. 012)
0.100(0.004)
0.310(0.012)
4. 800(0.189)
5.280(0.208)
Aug. 2011 Rev. 1. 8 BCD Semiconductor Manufacturing Limited
9

BCD Semiconductor Manufacturing Limited
IMPORTANT NOTICE
IMPORTANT NOTICE
BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifi-
BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifi-
cations herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any
cations herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any
particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use
particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use
of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or
of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or
other rights nor the rights of others.
other rights nor the rights of others.
http://www.bcdsemi.com
MAIN SITE
MAIN SITE
- Headquarters
BCD Semiconductor Manufacturing Limited
BCD Semiconductor Manufactur ing Limited
- Wafer Fab
No. 1600, Zi Xing Road, Shanghai ZiZhu Science-based Industrial Park, 200241, China
Shanghai SIM-BCD Semiconductor Manufacturing Limited
Tel: +86-21-24162266, Fax: +86-21-24162277
800, Yi Shan Road, Shanghai 200233, China
Tel: +86-21-6485 1491, Fax: +86-21-5450 0008
REGIONAL SALES OFFICE
Shenzhen Office
REGIONAL SALES OFFICE
Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd., Shenzhen Office
Shenzhen Office
Unit A Room 1203, Skyworth Bldg., Gaoxin Ave.1.S., Nanshan District, Shenzhen,
Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. Shenzhen Office
China
Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office
Tel: +86-755-8826 7951
Room E, 5F, Noble Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China
Fax: +86-755-8826 7865
Tel: +86-755-8826 7951
Fax: +86-755-8826 7865
- Wafer Fab
BCD Semiconductor Manufacturing Limited
Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.
- IC Design Group
800 Yi Shan Road, Shanghai 200233, China
Advanced Analog Circuits (Shanghai) Corporation
Tel: +86-21-6485 1491, Fax: +86-21-5450 0008
8F, Zone B, 900, Yi Shan Road, Shanghai 200233, China
Tel: +86-21-6495 9539, Fax: +86-21-6485 9673
Taiwan Office
BCD Semiconductor (Taiwan) Company Limited
Taiwan Office
4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei,
BCD Semiconductor (Taiwan) Company Limited
Tai wan
4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei,
Tel: +886-2-2656 2808
Taiwan
Fax: +886-2-2656 2806
Tel: +886-2-2656 2808
Fax: +886-2-2656 2806
USA Office
BCD Semiconductor Corp.
USA Office
30920 Huntwood Ave. Hayward,
BCD Semiconductor Corporation
CA 94544, USA
30920 Huntwood Ave. Hayward,
Tel : +1-510-324-2988
CA 94544, U.S.A
Fax: +1-510-324-2788
Tel : +1-510-324-2988
Fax: +1-510-324-2788