Diodes 74LVC2G34 User Manual

74LVC2G34
Description
The 74LVC2G34 is a dual buffer gate with standard push-pull outputs.
The device is designed for operation with a power supply range of
1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to
be used in a mixed voltage environment. The device is fully specified
for partial power down applications using I
disables the output preventing damaging current backflow when the
device is powered down.
The gate performs the positive Boolean function:
AY
OFF
. The I
OFF
circuitry
Pin Assignments
Features
Wide Supply Voltage Range from 1.65V to 5.5V
±24mA Output Drive at 3.0V
CMOS low power consumption
IOFF Supports Partial-Power-Down Mode Operation
Inputs accept up to 5.5V
ESD Protection Tested per JESD 22
Exceeds 200-V Machine Model (A115)
Exceeds 2000-V Human Body Model (A114)
Exceeds 1000-V Charged Device Model (C101)
Latch-Up Exceeds 100mA per JESD 78, Class I
DFN1409 package designed as a direct replacement for chip
scale packaging.
Range of Package Options SOT26, SOT353, DFN1010,
DFN1409 and DFN1410
Leadless packages per JESD30E
DFN1410 denoted as X2-DFN1410-6
DFN1409 denoted as X2-DFN1409-6
DFN1010 denoted as X2-DFN1010-6
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and < 1000 ppm antimony compounds.
74LVC2G34
Document number: DS35165 Rev. 5 - 2
Click here for ordering information, located at the end of datasheet
www.diodes.com
Applications
Voltage Level Shifting
General Purpose Logic
Power Down Signal Isolation
Wide array of products such as:
PCs, networking, notebooks, netbooks, tablets
Computer peripherals, hard drives, CD/DVD ROM
TV, DVD, DVR, set top box
Cell Phones, Personal Navigation / GPS
MP3 players ,Cameras, Video Recorders
1 of 12
© Diodes Incorporated
October 2013
Pin Descriptions
Pin Name Pin Number Function
1A 1 Data Input
GND 2 Ground
2A 3 Data Input
2Y 4 Data Output
VCC
1Y 6 Data Output
5
Supply Voltage
Logic Diagram
74LVC2G34
Function Table
Inputs Output
A Y
H H
L L
Absolute Maximum Ratings (Note 4) (@T
Symbol Parameter Rating Unit
ESD HBM Human Body Model ESD Protection 2 kV
ESD CDM Charged Device Model ESD Protection 1 kV
ESD MM Machine Model ESD Protection 200 V
VCC
VI
VO Voltage applied to output in high impedance or I
VO
IIK Input Clamp Current VI < 0
IOK Output Clamp Current VO < 0
IO
TJ
T
STG
Note: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values.
74LVC2G34
Document number: DS35165 Rev. 5 - 2
Supply Voltage Range -0.5 to +6.5 V
Input Voltage Range -0.5 to +6.5 V
Voltage applied to output in high or low state
Continuous Output Current -50 mA
Continuous Current Through V
Operating Junction Temperature -40 to +150 °C
Storage Temperature -65 to +150 °C
= +25°C, unless otherwise specified.)
A
state
OFF
or GND
DD
2 of 12
www.diodes.com
-0.5 to +6.5 V
-0.3 to VCC +0.5
-50 mA
-50 mA
±100 mA
V
October 2013
© Diodes Incorporated
74LVC2G34
Recommended Operating Conditions (Note 5) (@T
= +25°C, unless otherwise specified.)
A
Symbol Parameter Min Max Unit
VCC
V
VIL
VI
VO
IOH
IOL
Operating Voltage
High-Level Input Voltage
IH
Low-Level Input Voltage
Input Voltage 0 5.5 V
Output Voltage 0
High-Level Output Current
Low-Level Output Current
t/V Input transition rise or fall rate
TA
Note: 5. Unused inputs should be held at VCC or Ground.
Operating free-air temperature -40 +125 °C
Operating 1.65 5.5 V
Data retention only 1.5 V
= 1.65V to 1.95V 0.65 X VCC
V
CC
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
1.7 —
2 —
VCC = 4.5V to 5.5V 0.7 X VCC
= 1.65V to 1.95V
V
CC
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
VCC = 4.5V to 5.5V
— 0.7
— 0.8
0.35 X V
0.3 X VCC
CC
VCC
V
= 1.65V
CC
VCC = 2.3V
VCC = 3V
VCC = 4.5V
V
= 1.65V
CC
VCC = 2.3V
VCC = 3V
VCC = 4.5V
= 1.8V ± 0.15V, 2.5V ± 0.2V
V
CC
VCC = 3.3V ± 0.3V
VCC = 5V ± 0.5V
— -4
— -8
— -16
— -24
— -32
— 4
— 8
— 16
— 24
— 32
— 20
— 10
— 5
74LVC2G34
Document number: DS35165 Rev. 5 - 2
3 of 12
www.diodes.com
October 2013
© Diodes Incorporated
V
V
V
mA
mA
ns/V
74LVC2G34
Electrical Characteristics (@T
Symbol Parameter Test Conditions
VOH
VOL
I
ICC
ICC
High-Level Output Voltage
Low-Level Output Voltage
Input Current
II
Power Down Leakage
OFF
Current
Supply Current
Additional Supply Current
Package Characteristics (@T
Symbol Parameter Package Conditions Min Typ Max Unit
CI Input Capacitance Typical of all packages
θJA
θJC
Note: 6. Test condition for SOT26, SOT363, X2-DFN1410-6, X2-DFN1409-6 and X2-DFN1010 -6: Device mounted on FR-4 substrate PC board, 2oz copper with minimum recommended pad layout.
Thermal Resistance Junction-
to-Ambient
Thermal Resistance Junction-
to-Case
= +25°C, unless otherwise specified.)
A
VCC
IOH = -100μA
IOH = -4mA
IOH = -8mA
IOH = -16mA
IOH = -24mA
IOH = -32mA
IOL = 100μA
IOL = 4mA
IOL = 8mA
IOL = 16mA
IOL = 24mA
IOL = 32mA
VI = 5.5V or GND
VI or VO = 5.5V
VI = 5.5V or GND, IO = 0
Input at VCC –0.6V
= +25°C, VCC = 3.3V, unless otherwise specified.)
A
SOT26
SOT363
X2-DFN1410-6
X2-DFN1409-6
X2-DFN1010-6
SOT26
SOT363
X2-DFN1410-6
X2-DFN1409-6
X2-DFN1010-6
1.65V to 5.5V
1.65V 1.2 0.95
2.3V 1.9 1.7
3V
4.5V 3.8 3.4
1.65V to 5.5V 0.1 0.1
1.65V 0.45 0.70
2.3V 0.3 0.45
3V
4.5V 0.55 0.80
0 to 5.5V ± 5 ± 20 μA
0 ± 10 ± 20 μA
1.65V to 5.5V 10 40 μA
3V to 5.5V 500 5000 μA
Vcc = 3.3V
VI = V
– or GND
CC
(Note 6)
(Note 6)
+40°C to +85°C -40°C to +125°C Min Max Min Max Unit
V
– 0.1
CC
2.4 1.9
2.3 2.0
0.4 0.60
0.55 0.80
V
– 0.1
CC
3.5
204
371
430
450
510
52
143
190
225
250
V
V
pF
°C/W
°C/W
74LVC2G34
Document number: DS35165 Rev. 5 - 2
4 of 12
www.diodes.com
October 2013
© Diodes Incorporated
Loading...
+ 8 hidden pages