Diodes 74LVC1G07 User Manual

74LVC1G07

oduc

SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT

Description

The 74LVC1G07 is a single buffer gate with an open drain output.

The device is designed for operation with a power supply range of

1.65V to 5.5V. The input is tolerant to 5.5V allowing this device to be

used in a mixed voltage environment. The device is fully specified

for partial power down applications using I

disables the output preventing damaging current backflow when the

device is powered down. The open-drain output can be connected to

other open drain outputs to implement active-low wired-OR or active-

high wired-AND functions. The maximum sink current is 32 mA.

OFF

. The I

OFF

circuitry

Pin Assignments

Future

t

Pr

Features

 Wide Supply Voltage Range from 1.65 to 5.5V

 24mA Sink Current at 3.3V

 CMOS low power consumption

 I

 Inputs accept up to 5.5V

 ESD Protection Tested per JESD 22

 Latch-Up Exceeds 100mA per JESD 78, Class I

 Range of Package Options

 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

 Halogen and Antimony Free. “Green” Device (Note 3)

Supports Partial-Power-Down Mode Operation

OFF

o Exceeds 200-V Machine Model (A115)

o Exceeds 2000-V Human Body Model (A114)

o Exceeds 1000-V Charged Device Model (C101)

Applications

 Voltage Level Shifting

 General Purpose Logic

 Power Down Signal Isolation

 Wide array of products such as:

o PCs, networking, notebooks, netbooks, PDAs

o Tablet Computers, E-readers

o Computer peripherals, hard drives, CD/DVD ROM

o TV, DVD, DVR, set top box

o Cell Phones, Personal Navigation / GPS

o MP3 players ,Cameras, Video Recorders

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.

74LVC1G07

Document number: DS32274 Rev. 7 - 2

1 of 14

www.diodes.com

March 2014

Ordering Information

X

r

X

74 LVC1G 07

Logic Device

Function Package Packing

74 : Logic Prefix 07 : 1-Input Buffe LVC : 1.65 to 5.5 V with open drain SE : SOT353 Logic Family output Z : SOT553 1G : One Gate FS3 : X2-DFN0808-4 FW5 : X1-DFN1010-6 FW4 :X2-DFN1010-6 F FZ4 : X2- DFN1410-6

XX -7

W5 : SOT25 -7 : 7” Tape & Reel

4 : X2- DFN1409-6

74LVC1G07

Device

74LVC1G07W5-7 W5 SOT25

74LVC1G07SE-7 SE SOT353

74LVC1G07Z-7 Z SOT553

74LVC1G07FS3-7 FS3 X2-DFN0808-4

74LVC1G07FW5-7

(Future Product)

74LVC1G07FW4-7 FW4 X2-DFN1010-6

74LVC1G07FX4-7 FX4

74LVC1G07FZ4-7 FZ4 X2-DFN1410-6

Notes: 4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.

5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf

Packag e Code

FW5

Chip scale alternative

Package

(Notes 4, 5)

X1-DFN1010-6

(Future Product)

X2-DFN1409-6

3.0mm X 2.8mm X 1.2mm

2.0mm X 2.0mm X 1.1mm

1.6mm X 1.6 mm X 0.62mm

0.9mm X 0.9 mm X 0.35mm

0.5 mm pad pitch (diamond)

1.0mm X 1.0mm X 0.5mm

1.0mm X 1.0mm X 0.4mm

1.4mm X 0.9mm X 0.4mm

1.4mm X 1.0mm X 0.4mm

Package

Size

0.95 mm lead pitch

0.65 mm lead pitch

0.5 mm lead pitch

0.35 mm pad pitch

0.5 mm pad pitch

3000/Tape & Reel -7

4000/Tape & Reel -7

5000/Tape & Reel -7

7” Tape and Reel

Quantity Part Number Suffix

Pin Descriptions

Pin Name Description

NC No Connection

A Data Input

GND Ground

Y Data Output

VCC

Supply Voltage

Logic Diagram

2

A

4

Y

Function Table

Inputs Output

A Y

H H

L L

74LVC1G07

Document number: DS32274 Rev. 7 - 2

2 of 14

www.diodes.com

March 2014

74LVC1G07

Absolute Maximum Ratings (Notes 6, 7)

Symbol Description Rating Unit

ESD HBM Human Body Model ESD Protection 2 kV

ESD CDM Charged Device Model ESD Protection 1 kV

ESD MM Machine Model ESD Protection 200 V

VCC

VI

VO

IIK Input Clamp Current VI < 0

IOK

IO

I

CC, IGND

TJ

T

STG

Notes: 6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device

7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could

cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range..

operation should be within recommend values.

Supply Voltage Range -0.5 to 6.5 V

Input Voltage Range -0.5 to 6.5 V

Voltage applied to output in high impedance or I

Voltage applied to output in high or low state -0.5 to V

state -0.5 to 6.5 V

OFF

+0.5 V

CC

-50 mA

Output Clamp Current -50 mA

Continuous output current 50 mA

Continuous current through VCC or GND

±100 mA

Operating Junction Temperature -40 to +150 °C

Storage Temperature -65 to +150 °C

Recommended Operating Conditions (Note 8)

Symbol Parameter Min Max Unit

VCC

V

VIL

VI

VO

IOL

Operating Voltage

High-level Input Voltage

IH

Low-level input voltage

Input Voltage 0 5.5 V

Output Voltage 0 5.5 V

Low-level output current

t/V Input transition rise or fall rate

TA

Note: 8. Unused inputs should be held at VCC or Ground.

Operating free-air temperature — -40 +125 °C

Operating 1.65 5.5 V

Data retention only 1.5 — V

= 1.65V to 1.95V 0.65 X VCC

V

CC

VCC = 2.3V to 2.7V

VCC = 3V to 3.6V

1.7 —

2 —

VCC = 4.5V to 5.5V 0.7 X VCC

= 1.65V to 1.95V

V

CC

VCC = 2.3V to 2.7V

VCC = 3V to 3.6V

VCC = 4.5V to 5.5V

= 1.65V

V

CC

VCC = 2.3V

VCC = 2.7V

VCC = 3V

VCC = 4.5V

V

= 1.8V ± 0.15V, 2.5V ± 0.2V

CC

VCC = 3.3V ± 0.3V

VCC = 5V ± 0.5V

—

— 0.7

— 0.8

—

— 4

— 8

— 12

— 16

— 24

— 32

— 20

— 10

— 5

—

V

—

0.35 X VCC

V

0.3 X VCC

mA

ns/V

74LVC1G07

Document number: DS32274 Rev. 7 - 2

3 of 14

www.diodes.com

March 2014

74LVC1G07

Electrical Characteristics (All typical values are at V

Symbol Parameter Test Conditions

I

= 100A

OL

IOL = 4mA

IOL = 8mA

IOL = 12mA

IOL = 16mA

IOL = 24mA

IOL = 32mA

VI = 5.5 V or GND

VI or VO = 5.5V

= 5.5V or GND

V

I

=0

O

Input at

–0.6 V

V

CC

Vi = V

– or GND

CC

II

OFF

ICC

Ci

Low Level

Output Voltage

Input Current

Power Down

Leakage

Current

Supply Current

Additional

Supply Current

Input

Capacitance

VOL

I

ICC

V

CC

1.65V to 5.5V — — 0.1 — 0.1

1.65V — — 0.45 — 0.7

2.3V — — 0.3 — 0.45

2.7V — — 0.4 — 0.6

3V

4.5V — — 0.55 — .8

0 to 5.5V — ± 0.1 ±5 — ± 100 A

0V — — ±10 — ±200 A

5.5V — 0.1 10 — 200 A

3V to 5.5V — — 500 — 5000 A

3.3V — 5 — — — pF

= 3.3V, TA = +25°C)

CC

Min Typ. Max Min Max

— — 0.4 — 0.6

— — 0.55 — 0.8

-40°C to +85°C -40°C to +125°C Unit

V

74LVC1G07

Document number: DS32274 Rev. 7 - 2

4 of 14

www.diodes.com

March 2014

74LVC1G07

Package Characteristics

V

Symbol Parameter Test Conditions

SOT25

SOT353 — 371 —

SOT553 — 231 —

JA

JC

Note: 9. Test condition for each of the 8 package types: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.

Thermal Resistance

Junction-to-Ambient

Thermal Resistance

Junction-to-Case

X2-DFN0808-4 — 400 —

X1-DFN1010-6 — 435 —

X2-DFN1010-6 — 445 —

X2-DFN1409-6 — 470 —

X2-DFN1410-6 — 460 —

SOT25

SOT353 — 143 —

SOT553 — 105 —

X2-DFN0808-4 — 225 —

X1-DFN1010-6 — 250 —

X2-DFN1010-6 — 250 —

X2-DFN1409-6 — 275 —

X2-DFN1410-6 — 265 —

CC

(Note 9)

Min Typ. Max Unit

— 204 —

°C/W

— 52 —

°C/W

Switching Characteristics

Figure 1 Typical Values at TA = +25°C and nominal voltages 1.8V, 2.5V, 2.7V, 3.3V, and 5.0V.

T

Parameter

tpd

From Input

A or B Y

To

Output

V

CC

1.8V ± 0.15V 1.0 3.0 6.5 1.0 8.5

2.5V ± 0.2V 0.5 1.9 4.0 0.5 5.5

2.7V 0.5 2.5 4.5 0.5 6.0

3.3 V ± 0.3V 0.5 2.3 4.0 0.5 5.5

5.0V ± 0.5V 0.5 1.7 3.0 0.5 4.0

= -40°C to +85°C TA = -40°C to +125°C

A

Min Typ Max Min Max

Operating Characteristics

TA = +25°C

V

= 1.8V VCC = 2.5V VCC = 3.3V VCC = 5V

Parameter

Cpd

Power dissipation

capacitance

Test

Conditions

f = 10 MHz 3 3 4 6 pF

CC

Typ. Typ. Typ. Typ.

Unit

ns

Unit

74LVC1G07

Document number: DS32274 Rev. 7 - 2

5 of 14

www.diodes.com

March 2014