Diodes 74LVC07A User Manual

74LVC07
HEX BUFFERS WITH OPEN DRAIN OUTPUTS
Description
The 74LVC07A provides six independent open-drain buffers. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. The outputs can be connected to implement active-low wired-OR or active-high wired-AND functions. The gates perform the positive Boolean function:
AY =
Pin Assignments
Features
Wide Supply Voltage Range from 1.65V to 5.5V
Sinks 24mA at V
CMOS low power consumption
IOFF Supports Partial-Power-Down Mode Operation
Inputs or outputs accept up to 5.5V
Inputs can be driven by 3.3V or 5.5V allowing for voltage
translation applications.
ESD Protection Exceeds JESD 22
200-V Machine Model (A115-A)  2000-V Human Body Model (A114-A)  Exceeds 1000-V Charged Device Model (C101C)
Latch-Up Exceeds 250 mA per JESD 78, Class II
Range of Package Options SO-14 and TSSOP-14
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
74LVC06A
Document number: DS35259 Rev. 3 - 2
= 3.3V
CC
www.diodes.com
Applications
Voltage Level Shifting
General Purpose Logic
Power Down Signal Isolation
Wide array of products such as:
PCs, networking, notebooks, ultrabooks, netbooks Computer peripherals, hard drives, CD/DVD ROM TV, DVD, DVR, set top box
1 of 10
© Diodes Incorporated
July 2012
Pin Descriptions
Pin Number Pin Name Description
1 1A Data Input 2 1Y Data Output 3 2A Data Input 4 2Y Data Output 5 3A Data Input 6 3Y Data Output 7 GND Ground 8 4Y Data Output
9 4A Data Input 10 5Y Data Output 11 5A Data Input 12 6Y Data Output 13 6A Data Input
V
14
CC
Supply Voltage
Logic Diagram
1A
1
2
1Y
74LVC07
3
2A
5
3A
9
4A
11
5A
13
6A
Function Table
Inputs Outputs
A Y
L L H Z
74LVC06A
Document number: DS35259 Rev. 3 - 2
10
12
4
2Y
6
3Y
8
4Y
5Y
6Y
2 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC07
Absolute Maximum Ratings (Note 4) (@T
Symbol Description Rating Unit
ESD HBM Human Body Model ESD Protection 2 KV
ESD CDM Charged Device Model ESD Protection 1 KV
ESD MM Machine Model ESD Protection 200 V
VCC
VI VO Voltage applied to output in high impedance or I VO
IIK Input Clamp Current VI < 0 IOK Output Clamp Current VO < 0
IO
Continuous current through Vdd or GND ±100 mA
TJ
T
STG
P
TOT
Note: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should
be within recommend values.
Supply Voltage Range -0.5 to +6.5 V Input Voltage Range -0.5 to +6.5 V
Voltage applied to output in high or low state
Continuous output current 50 mA
Operating Junction Temperature -40 to +150 °C Storage Temperature -65 to +150 °C Total Power Dissipation 500 mW
Recommended Operating Conditions (Note 5) (@T
Symbol Parameter Conditions Min Max Unit
VCC
VI
VO
Δt/ΔV Input transition rise or fall rate
TA
Notes: 5. Unused inputs should be held at VCC or Ground.
Supply Voltage 1.65 5.5 V Input Voltage 0 5.5 V
Output Voltage
Operating free-air temperature -40 +125 ºC
Active Mode 0 V
CC
= 1.65V to 2.7V
V
CC
VCC = 2.7V to 5.5V
= +25°C, unless otherwise specified.)
A
state
OFF
= +25°C, unless otherwise specified.)
A
= 0V; Power Down Mode
-0.5 to +6.5 V
-0.3 to VCC +0.5
-50 mA
-50 mA
V
CC
0 5.5 V
20 10
V
V
ns/V
74LVC06A
Document number: DS35259 Rev. 3 - 2
3 of 10
www.diodes.com
July 2012
© Diodes Incorporated
Loading...
+ 7 hidden pages