Diodes 74LV05A User Manual

A

Description

The 74LV05A provides provides six independent inverters with open

drain outputs. The device is designed for operation with a power

supply range of 2.0V to 5.5V.

The inputs are tolerant to 5.5V allowing this device to be used in a

mixed voltage environment. The device is fully specified for partial

power down applications using I

output preventing damaging current backflow when the device is

powered down.

The gates perform the Boolean function:

OFF

. The I

AY 

Features

Preliminary

 Wide Supply Voltage Range from 2.0V to 5.5V

NEW PRODUCT

 Sinks 12mA at V

 CMOS low power consumption

 I

 Inputs or Outputs accept up to 5.5V

 Inputs can be driven by 3.3V or 5V allowing for voltage

 Schmitt Trigger Action at All Inputs

 ESD Protection Tested per JESD 22

 Latch-Up Exceeds 100mA per JESD 78, Class I

 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

 Halogen and Antimony Free. “Green” Device (Note 3)

Supports Partial -Power Down Operation

OFF

translation applications.

 Exceeds 200-V Machine Model (A115)

 Exceeds 2000-V Human Body Model (A114)

 Exceeds 1000-V Charged Device Model (C101)

= 4.5V

CC

circuitry disables the

OFF

HEX INVERTERS WITH OPEN DRAIN OUTPUTS

Pin Assignments

Applications

 General Purpose Logic

 Power Down Signal Isolation

 Wide array of products such as:

 PCs, networking, notebooks, ultrabooks, netbooks

 Computer peripherals, hard drives, CD/DVD ROM

 TV, DVD, DVR, set top box

74LV05

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free,
"Green" and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.

Click for Ordering Information

74LV05A

Document number: DS35659 Rev. 1 - 2

1 of 9

www.diodes.com

October 2013

© Diodes Incorporated

A

Pin Descriptions

74LV05

Logic Diagram

Pin Number Pin Name Description

1 1A Data Input
2 1Y Data Output
3 2A Data Input
4 2Y Data Output
5 3A Data Input
6 3Y Data Output
7 GND Ground
8 4Y Data Output

9 4A Data Input
10 5Y Data Output
11 5A Data Input

Preliminary

NEW PRODUCT

12 6Y Data Output
13 6A Data Input
14 Vcc Supply Voltage

Function Table

Input Output

A Y

H L

L Z

Absolute Maximum Ratings (Note 4) (@T

= +25°C, unless otherwise specified.)

A

Symbol Parameter

ESD HBM Human Body Model ESD Protection

ESD CDM Charged Device Model ESD Protection 1 kV

ESD MM Machine Model ESD Protection

VCC

VI

IIK Input Clamp Current VI < 0V

IOK Output Clamp Current VO < 0V

IO Continuous Output Current - 0.5V < V

ICC

I

GND

TJ

T

STG

P

TOT

Note: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should
be within recommend values.

Supply Voltage Range

Input Voltage Range (Note 4) -0.5 to +7.0 V

Vcc +0.5V

O

Continuous Current Through Vcc

Continuous Current Through GND

Operating Junction Temperature -40 to +150 °C

Storage Temperature

Total Power Dissipation

Rating Unit

2 kV

200 V

-0.5 to +7.0 V

-20 mA

-50 mA

- 25 mA

50 mA

-50 mA

-65 to +150 °C

500 mW

74LV05A

Document number: DS35659 Rev. 1 - 2

2 of 9

www.diodes.com

October 2013

© Diodes Incorporated

Preliminary

A

NEW PRODUCT

74LV05

Recommended Operating Conditions (Note 5) (@T

= +25°C, unless otherwise specified.)

A

Symbol Parameter Conditions Min Max Unit

VCC

VI

VO

Supply Voltage

Input Voltage 0 5.5 V

Output Voltage 0 5.5 V

2.0 5.5 V

2.0V 50 μA

IOL

Low-Level Output Current

2.3V to 2.7V 2 mA

3.0V to 3.6V 6 mA

4.5V to 5.5V 12 mA

Δt/ΔV

TA

Note: 5. Unused inputs should be held at Vcc or Ground.

Electrical Characteristics (@T

Symbol Parameter

Input Transition Rise or Fall
Rate

Operating Free-Air
Temperature

Test Conditions

= +25°C, unless otherwise specified.)

A

2.0V

High-Level Input

VIH

Voltage

2.3V to 2.7V

3.0V to 3.6V

4.5V to 5.5V

VIL

Low-Level Input
Voltage

2.3V to 2.7V

3.0V to 3.6V

4.5V to 5.5V

= 50μA

I

OL

VOL

Low-Level
Output Voltage

IOL = 2mA

IOL = 6mA

IOL = 12mA

Power Down

I

OFF

Leakage Current

Input Current

II

Supply Current

ICC

V

or VO = 0 to 5.5V

I

V

=GND or 5.5V

I

= GND or VCC

V

I

=0

I

O

2.3V to 2.7V 200

3.0V to 3.6V 100

ns/V

4.5V to 5.5V 20

T

= -40°C to +85°C TA = -40°C to +125°C

V

CC

A

Min Max Min Max

-40 +125 °C

1.5 1.5

V

V

V

CC

CC

CC

X 0.7

X 0.7

X 0.7

VCC X 0.7

VCC X 0.7

VCC X 0.7

2.0V 0.5 0.5

V

V

V

CC

CC

CC

X 0.3

X 0.3

X 0.3

VCC X 0.3

VCC X 0.3

VCC X 0.3

2.0V to 5.5V 0.1 0.1

2.3V 0.4 0.4

3.0V 0.44 0.44

4.5V 0.55 0.55

0V 5 5 μA

0 to 5.5V ±1 ±1 μA

5.5V 20 20 μA

Unit

V

V

V

74LV05A

Document number: DS35659 Rev. 1 - 2

3 of 9

www.diodes.com

October 2013

© Diodes Incorporated