Diodes 74HC05 User Manual

HEX INVERTERS WITH OPEN DRAIN OUTPUTS
Description
The 74HC05 provides provides six independent inverters with open
drain outputs. The device is designed for operation with a power
supply range of 2.0V to 6.0V.
The gates perform the Boolean function:
AY =
Pin Assignments
Features
Wide Supply Voltage Range from 2.0V to 6.0V
Sinks 4mA at V
CMOS Low Power Consumption
Schmitt Trigger Action at All Inputs
ESD Protection Exceeds JESD 22
200-V Machine Model (A115-A)
2000-V Human Body Model (A114-A)
Exceeds 1000-V Charged Device Model (C101C)
Range of Package Options SO-14 and TSSOP-14
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
= 4.5V
CC
Applications
General Purpose Logic
Wide array of products such as:
PCs, Networking, Notebooks, Netbooks
Computer Peripherals, Hard Drives, CD/DVD ROM
TV, DVD, DVR, Set Top Box
74HC05
74HC05
Document number: DS35321 Rev. 3 - 2
1 of 7
www.diodes.com
January 2013
© Diodes Incorporated
Pin Descriptions
Pin
Number
1 1A Data Input
2 1Y Data Output
3 2A Data Input
4 2Y Data Output
5 3A Data Input
6 3Y Data Output
7 GND Ground
8 4Y Data Output
9 4A Data Input
10 5Y Data Output
11 5A Data Input
12 6Y Data Output
13 6A Data Input
14
Logic Diagram
Pin Name Function
V
CC
Supply Voltage
74HC05
Function Table
Input Output
A Y
H L
L Z
74HC05
Document number: DS35321 Rev. 3 - 2
2 of 7
www.diodes.com
January 2013
© Diodes Incorporated
Absolute Maximum Ratings (Note 4) (@T
Symbol Description Rating Unit
ESD HBM Human Body Model ESD Protection 2 KV
ESD CDM Charged Device Model ESD Protection 1 KV
ESD MM Machine Model ESD Protection 200 V
VCC
VI
Supply Voltage Range -0.5 to +7.0 V
Input Voltage Range (Note 5) -0.5 to +7.0 V
IIK Input Clamp Current VI < -0.5V or Vi > VCC + 0.5V
IOK Output Clamp Current VO < -0.5V or VO > VCC + 0.5V
IO Continuous Output Current - 0.5V < V
ICC Continuous Current Through VCC
I
GND
TJ
T
STG
P
TOT
Notes: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values.
5. Input Voltage cannot exceed V
Continuous Current Through GND -50 mA
Operating Junction Temperature -40 to +150 °C
Storage Temperature -65 to +150 °C
Total Power Dissipation 500 mW
to the extent the Maximum clamp current is exceeded
CC
Recommended Operating Conditions (Note 6) (@T
Symbol Parameter Conditions Min Max Unit
VCC
VI
VO
Δt/ΔV Input transition rise or fall rate
TA
Note: 6. Unused inputs should be held at VCC or Ground.
Electrical Characteristics (@T
Symbol Parameter Test Conditions
II
High-level Input Voltage
Low-level input voltage
Low-level Output Voltage
Z State Leakage Current
Input Current
Supply Current
VIH
VIL
VOL
IOZ
ICC
Supply Voltage
Input Voltage 0 Vcc V
Output Voltage 0
V
VCC = 4.5V
VCC = 6.0V
Operating free-air temperature
= +25°C, unless otherwise specified.)
A
2.0V 1.5 1.5
4.5V 3.15 3.15
6.0V 4.2 4.2
2.0V 0.5 0.5
4.5V 1.35 1.35
6.0V 1.8 1.8
I
= 20μA
OL
IOL = 20μA
IOL = 20μA
IOL = 4mA
IOL = 5.2mA
V
=0 to 6.0V
O
=GND or 6.0V
V
I
VI =GND to 5.5V
= GND or VCC,
V
I
I
=0
O
= +25°C, unless otherwise specified.)
A
±20 mA
±20 mA
O VCC
+ 0.5V
+/- 25 mA
50 mA
= +25°C, unless otherwise specified.)
A
2.0 6.0 V
VCC
= 2.0V
CC
625
140
85
V
CC
-40 +125 °C
= -40°C to +85°C TA = -40°C to +125°C
T
A
Min Max Min Max
2.0V 0.1 0.1
4.5V 0.1 0.1
6.0V 0.1 0.1
4.5V 0.33 0.44
6.0V 0.33 0.44
6.0V ± 5.0 ± 10 μA
6.0V ± 1 ± 1 μA
6.0V 20 40 μA
74HC05
V
ns/V
Unit
V
V
V
74HC05
Document number: DS35321 Rev. 3 - 2
3 of 7
www.diodes.com
January 2013
© Diodes Incorporated
Loading...
+ 4 hidden pages