Dinex TSH2DV User Manual
Model Numbers
TSH2DV
Application
The TSH2DV is a mobile, fully
enclosed, self-leveling plate
dispenser.
Construction
The housing of the cabinet and
the finish shall be all 304, No. 20
gauge stainless steel. Each unit
shall include four 5” (13cm) casters, 2 fixed/2 swivel (one with
brake). The cabinet exterior shall
have a one-piece seamless stainless steel top panel. Each unit
shall have a push/pull handle
with bumpers on either end. Two
bottom mounted corner bumpers
are located on the side opposite
the push/pull handle. Guide rods
are adjustable to accommodate
plates 8.75” to 11” in diameter.
*Melamine, Thermacite and Plastic
are not recommended to be used
in conjunction with the TSH Plate
Heater.
Self-Leveling Action
The self-leveling action shall be
provided by helical springs which
are adjustable according to plate
weight. See operating manual for
calibration instruction. Capacity
approximately 50 per silo.
(Capacity may vary according to
plate thickness).
Heating System
Adjustable for 208v or 240v, 875
watts, 15 amps (single phase).
Cord length 6 ft.
Thermostat shall be positioned
inside on the highest setting.
The dispenser shall include and
“On/Off” switch, indicator light
and 3-wire (250cm long) coiled
electrical lead cord secured to dispenser frame. NEMA plug 6-15P.
Warranty
One year parts and labor.
ITEM #
PLATE HEATER
International, lnc.
Building 2, Suite 106
628 Hebron Avenue
Glastonbury, CT 06033-5006
(800) 523-9752 Fax: (860) 652-3135
http://www.dinex.com
TMP-002-REV 05/04
JOB
MODEL: TSH2DV
Shown with optional cover
International, lnc.
Building 2, Suite 106
628 Hebron Avenue
Glastonbury, CT 06033-5006
(800) 523-9752 Fax: (860) 652-3135
http://www.dinex.com
TMP-002-REV 05/04
PLATE HEATER
Please confirm that you have the most current specification sheet by visiting www.dinex.com.
Dinex®reserves the right to change specifications and product design without notice.
Such revisions do not entitle the buyer to corresponding changes, improvements,
additions or replacements for previously purchased equipment.
Printed in USAA
Plug Configuration for Dinex
Heated Plate Dispenser
2 Pole, 3 Wire
208/240 Volts, 1PH. 15 Amps
Plug: NEMA 6-15P
Items and Dimensions
MODEL
NUMBER
Optional Accessories
• Wrap-around bumper
• Covers
190 lbs
(86.3kg)
14
TSH2DV
17.75”
(45cm)
33.75”
(86cm)
35.25”
(90cm)
LENGTH
DEPTH
HEIGHT
SHIP
WEIGHT
SHIP
CUBE
Length Depth
Top View
Loading...