Dinex TQ1T2D14 Installation Manual

TQ Quiet Series Cart
Operating & Maintenance Manual

Models: TQ1T1D6

TQ1T1D8
TQ1T2D14
TQ1T2D16
TQ1T2D18
TQ1T2D20
TQ2T1D10
TQ2T1D12
TQ2T1D14
TQ2T1D16
TQ2T1D18
TQ2T1D20
TQ2T2D24
TQ2T2D28
TQ2T2D32
TQ2T2D36

TQ Quiet Series Cart:

SECTION 1: INTRODUCTION

Introduction ..............................................................................2

Freight Damage Claims plate ..................................................2

SECTION 2: INFORMATION

Information...............................................................................2

Identification Plate ...................................................................2

For Service Information call 1.888.673.4639

Please provide following information:

• Designation number

• Identification number

Dinex

4711 E. Hefner Rd. (73131) • PO Box 53006 • Oklahoma City, OK 73152-3006
[phone] • Fax [phone] • www.dinex.com

DO NOT DISCARD

SECTION 3: MAINTENANCE

Maintenance ............................................................................3

Cleaning ..................................................................................3

WARRANTY ............................................................................4

Manual No. TQ Quiet Cart

TQ Quiet Cart | 2

INTRODUCTION

Congratulations! You have just purchased one of the nest pieces of
equipment on the market today. Before installing or operating your
new Dinex equipment you should read through this material. This
manual should be retained for further reference as it contains operation
instructions and warranty information. Should you have any questions
concerning the Equipment, please call the 24/7 Dinex Hotline at 1-888­673-4639.

IMPORTANT: For your safety, read and follow all cautions,
information, and warnings.

!

FREIGHT DAMAGE CLAIMS

Your TQ Series Cart was carefully inspected and packed before leaving
our factory. The transportation company assumes full responsibility for
the safe delivery of this equipment. Dinex cannot assume responsibility

for damage or loss incurred during transit. Visible damage or loss
should be noted on the freight bill and signed by the person
making the delivery.

A freight claim should be led immediately with the transportation
company. If damage is unnoticed or concealed until the equipment is
unpacked, notify the transportation company immediately and tell them
you want to le a concealed damage claim. This must be done within
fteen (15) days after delivery was made. Be sure to retain all packing

materials and cartons.

IMPORTANT: All packing materials should be retained for return
shipment.

!

INFORMATION

INFORMATION ON THIS SECTION

When contacting customer service please provide the following
information located on the product identication plate:

• Model number

• Serial number of the equipment (identication plate)

• Description of the part

• See Manual for item number

IDENTIFICATION PLATE

Different serial numbers for each unit.

APPLICATION AND USE

The Equipment is for commercial use in the food service industry.

ATTENTION: Installation of this equipment should be performed

only by persons qualied or licensed to install electrical equipment.

!

• Adjustments and service work should be performed only by
qualied service technicians.

• This equipment is intended for commercial use only. Not for

household use.

• Use of other than genuine Dinex replacement parts or service
work performed by those other than authorized Dinex service
agents will void the warranty.

• Do not use corrosive cleaners on the equipment. Use
only mild detergents.

SAFETY

The instructions contained in this manual provide important guidelines
for the Equipment user regarding a correct and safe installation.

Particular attention should be paid to the warnings given in various parts

of this manual.