Dinex IESOOS User Manual
JOB _____________
CONVEYOR ACCESSORY & ELECTRIC RACEWAY
ITEM # _____________
NEMA 3R loadcenter
Raceway to be fitted with a removable
stainless steel NEMA3R top cover for
access to receptacles
Receptacles are factory
pre-wired to circuit breakers in
loadcenter. Each furnished with
NEMA3R weather-proof cover.
Power connection located
thru knock-out panel in
bottom of loadcenter.
Electric Raceway
Options Available At An Additional Cost:
120/1ph 20.0 AMP Single Receptacle (NEMA 5-20R)
120/1ph 30.0 AMP Single Receptacle (NEMA 5-30R)
120/1ph 50.0 AMP Single Receptacle (NEMA 5-50R)
208/1ph 20.0 AMP Single Receptacle (NEMA 6-20R)
208/1ph 30.0 AMP Single Receptacle (NEMA 6-30R)
208/1ph 50.0 AMP Single Receptacle (NEMA 6-50R)
120/208/1ph 20.0 AMP Single Receptacle (NEMA 14-20R)
120/208/1ph 30.0 AMP Single Receptacle (NEMA 14-30R)
120/208/1ph 50.0 AMP Single Receptacle (NEMA 14-50R)
208/3ph 20.0 AMP Single Receptacle (NEMA L15-20R)
208/3ph 30.0 AMP Single Receptacle (NEMA 15-30R)
208/3ph 50.0 AMP Single Receptacle (NEMA 15-50R)
120/208/3ph 20.0 AMP Single Receptacle (NEMA L21-20R)
120/208/3ph 30.0 AMP Single Receptacle (NEMA L21-30R)
Hard Wire (J-Box) Connections
Pin & Sleeve Receptacle
Cord & Plug Assembly to Accommodate Entire Raceway Load. ONLY WHEN ENTIRE
RACEWAY LOAD DOES NOT EXCEED 100.0 AMPS.
Duplex Receptacles
120/208/1ph 150.0 AMP Loadcenter. PENDING FACTORY APPROVAL
120/208/1ph 200.0 AMP Loadcenter. PENDING FACTORY APPROVAL
120/208/3ph 150.0 AMP Loadcenter. PENDING FACTORY APPROVAL
120/208/3ph 200.0 AMP Loadcenter. PENDING FACTORY APPROVAL
Item Numbers
Electric Raceways
q DXIESORW8
q DXIESORW10
q DXIESORW12
q DXIESORW14
q DXIESORW16
q DXIESORW18
q DXIESORW20
Conveyor Accessory
q DXIESOOS (Specify Length)
Note to Customer
The model numbers for each loadcenter
DO NOT reflect the actual amperage
load for the entire raceway. The model
numbers note the MAXIMUM capacity
for their respective loadcenter. Please
consult the factory for the actual
amperage load for each raceway.
Some options such as voltage & phase
of a particular loadcenter may not be
available on some conveyors.
Building 2, Suite 106
628 Hebron Avenue
Glastonbury, CT 06033
800.523.9752 Fax: 860.652.3135
www.dinex.com
105-REV 10/09
CONVEYOR ACCESSORY & ELECTRIC RACEWAY
Standard
3’, 4’, 5’, 6’, 7’
Contact Factory for Additional Sizes
1” (3cm) O.D. Stainless
Steel tubing shelf
uprights
Stainless Steel feet
to adapt to side
edge of conveyor
Note to Customer
When ordering specify the type of conveyor the shelf
is to be used with. If shelf is to be used on an existing
conveyor, specify size and type of edge stainless steel
feet will be adapting to.
Items and Dimensions
18” (46cm)
Standard
DXIESOOS
(Specify Length)
12” (30cm)
Standard
18” (46cm)
Standard
(Shown with optional 2nd tier shelf)
ITEM NUMBER MODEL NUMBER SIZE SHIP WEIGHT
DXIESORW8 IESORW8 8 ft. (2.4 meter) section 80 lb. (36kg)
DXIESORW10 IESORW10 10 ft. (3.05 meter) section 100 lb. (45kg)
DXIESORW12 IESORW12 12 ft. (3.6 meter) section 120 lb. (54kg)
DXIESORW14 IESORW14 14 ft. (4.3 meter) section 140 lb. (64kg)
DXIESORW16 IESORW16 16 ft. (4.9 meter) section 160 lb. (73kg)
DXIESORW18 IESORW18 18 ft. (5.5 meter) section 180 lb. (82kg)
DXIESORW20 IESORW20 20 ft. (6.1 meter) section 200 lb. (91kg)
DXIESOOS IESOOS - -
Please confirm that you have the most current specification sheet by visiting www.dinex.com.
Dinex® reserves the right to change specifications and product design without notice.
Such revisions do not entitle the buyer to corresponding changes, improvements,
additions or replacements for previously purchased equipment.
Printed in USA
Building 2, Suite 106
628 Hebron Avenue
Glastonbury, CT 06033
800.523.9752 Fax: 860.652.3135
www.dinex.com
105-REV 10/09
Loading...