Dinex IDP2O-1012 User Manual
JOB _____________
ITEM # _____________
MOBILE PLATE DISPENSERS - OPEN
Item Numbers
q DXIDP Plate Dispensers
q DXIDPH Plate Heaters
Application
These self-leveling mobile style plate
dispensers offer a two silo, open base
heated or unheated.
These self-leveling mobile style plate
dispensers can be found on tray lines,
front or back-of-the-house, or any place
your needs require.
Construction
The lifting mechanisms are constructed
of type 304 stainless steel with all
exposed parts having a No. 4 finish.
Three plate guides of high impact
molded plastic are securely mounted to
the top flange. A full complement of
stainless steel extension springs are
furnished which can be easily disconnected
to adjust the lifting rate. The units are
self-supporting by means of a diestamped top flange welded to supporting
channels and die-stamped bottom plate.
A floating plate suspended from the
extension springs supports the stack of
plates to be dispensed.
Heated models have a stainless steel
exterior shield furnished on each dispenser.
It is fabricated of stainless steel consisting
of a cylinder with an enclosed bottom.
The shield is secured to the dispenser by
means of a threaded fastener located at
the base.
The open style tubular frame base is
constructed of 1” (3cm) diameter
16-gauge type 304 stainless steel tubing
integrally welded to a 16-gauge type
304 stainless steel top and bottom shelf.
Tubular members run the full length of
the unit for maximum strength. The top
of the unit is reinforced with channel
bracing between each dispenser. Four 5”
(13cm) heavy-duty non-marking swivel
casters are securely mounted to the
tubular frame.
Heated dispensers are equipped with a
120 volt, 60 cycle single-phase tubular
heater and thermostat mounted in the
base of the dispenser. A lighted on/off
switch is mounted in one of the plastic
plate guides on top of the dispenser.
Each unit is equipped with an 8’ cord
set and NEMA 5-15 or 5-30 plug factory
set at 150°F(65°C) adjustable
130°F(54°C) - 170° F (54°C).
Standard Features
• Stainless steel construction
including stainless steel extension
springs for long lasting dependable
service.
• Patented self-leveling mechanism
lifts out for easy cleaning.
• Heated units UL & CUL listed
• 2 Locking casters
Options
• Silo covers
• Corner bumpers
Warranty
One year parts and labor.
Building 2, Suite 106
628 Hebron Avenue
Glastonbury, CT 06033
800.523.9752 Fax: 860.652.3135
www.dinex.com
032-REV 01/10
MOBILE PLATE DISPENSERS - OPEN
Depth
(99.1cm)
Length
39”
Specifications
ITEM
NUMBER
DXIDP2O0912 IDP2O/0912
DXIDP2O1012 IDP2O/1012
DXIDP2O1200 IDP2O/1200
DXIDP3O0912 IDP3O/0912
DXIDP3O1012 IDP3O/1012
DXIDP3O1200 IDP3O/1200
MODEL
NUMBER
SHIP
W T.
144 lb.
(65.4kg)
98 lb.
(44.5kg)
98 lb.
(44.5kg)
108 lb.
(49.0kg)
114 lb.
(52.0kg)
131 lb.
(60.0kg)
ITEM
NUMBER
DXIDPH2O0912 IDPH2O/0912
DXIDPH2O1012 IDPH2O/1012
DXIDPH2O1200 IDPH2O/1200
- - - - -
- - - - -
- - - - -
MODEL
NUMBER
SHIP
W T.
144 lb.
(65.4kg)
148 lb.
(67.2kg)
159 lb.
(72.2kg)
Optional Accessories
Silo Cover
120V-1PH O. A. SIZE MAX.
WATTS AMPS L D H
1,000 8.0
1,000 8.0
1,300 11.0
35.50”
(84cm)
35.50”
(84cm)
35.50”
(94cm)
45.75”
(116.2cm)
45.75”
(116.2cm)
52.50”
(133.4cm)
17.75”
(45.1cm)
17.75”
(45.1cm)
17.75”
(45.1cm)
17.75”
(45.1cm)
17.75”
(45.1cm)
17.75”
(45.1cm)
39”
(99.1cm)
39”
(99.1cm)
39”
(99.1cm)
39”
(99.1cm)
39”
(99.1cm)
39”
(99.1cm)
PLATE
SIZE
9.125” 13.4
10.125” 13.4
12.0” 13.4
9.125” 17.1
10.125” 17.1
12.0” 22.6
SHIP
CUBE
Please confirm that you have the most current specification sheet by visiting www.dinex.com.
Dinex® reserves the right to change specifications and product design without notice.
Such revisions do not entitle the buyer to corresponding changes, improvements,
additions or replacements for previously purchased equipment.
Printed in USA
Building 2, Suite 106
628 Hebron Avenue
Glastonbury, CT 06033
800.523.9752 Fax: 860.652.3135
www.dinex.com
032-REV 01/10
Loading...