Digitus DN-16028 Service Manual
DIGITUS Plug&View
OptiView
User Manual
DN-16028
1
1. Introduction:
DIGITUS Plug&View series of IP cameras offers P2P Cloud service to avoid those
complicated network setting for camera installation. All you need is just “Plug&View” with
the 3 simple steps.
2. Package Content:
- IP camera x 1
- Power supply x 1
- Ethernet cable x 1
- Support CD x 1
- Mounting accessory x 1
3. Installation Procedures:
3.1 Getting connected
1. Power on the camera and connect the Ethernet cable from the camera to the router.
Please make sure that the router is setup to be able to access Internet.
2. Open a browser (Internet Explorer, Google Chrome, Mozilla Firefox...) and key in
http://mydigitus.net/ to access DIGITUS Plug&View Website.
Please login your account and password if you already have a Google Account
(gmail account). Otherwise, please create a new Google account.
2
Alternatively you can also download “DIGITUS Plug&View” APP from APP
store or Google Play and execute this APP from your mobile devices and login the
account and password instead of using browser.
3. With browser, please key in the MAC address and Activation code as shown on the
1st page of the QIG to add camera under your account. After press “Apply”, it will
show “Success”.
Alternatively the easiest way to add camera without key-in long numbers is using the
st
smart phone to scan the QR code on the 1
page of this QIG using “DIGITUS Plug&View”
APP from your mobile devices.
After adding the camera, now you can have live-view anytime anywhere.
3.2 Getting connected wirelessly
Wireless (WiFi) connection between IP cameras and Wireless router / Access point is
also available with the following procedures.
4. After completing Step 1 ~ 3 for wired connection with Ethernet cable, login into
http://www.mydigitus.net/ and click the setting icon to enter camera user
interface.
3
Then you will enter the Web User Interface of the cameras. Please select livestream
mode to enter. Please key in “admin” for the account and password to log in.
5. Press “Tool bar” to enter the configuration page.
4
Loading...