Digitus DN-13007 User manual [ml]
USB Port 1
2-Port USB 2.0 Hi-Speed MFP Server
DN-13007
Quick Installation Guide
English
Deutsch
Power Adaptor
Connector
Init Button
USB Port 2
Power
USB2
Indicators
Fig1 Physical Description
Link Status USB1
Ethernet
Connector
1
Fig2 Autorun
Fig3 MFP Server Control Center Software
2
Fig4 Set Server Name and Code Page
3
Fig5 TCP/IP Setting
Fig6 Add Printer
4
Fig7 Printer Setting for MFP Server Control Center
Fig8 Printer Setting for Local Port
Fig9 Network Scan Button
5
English
. Introduction
①
This document describes the steps for installation and configuration of
DN-13007 USB MFP server as a Print/File/Scan server in Windows environment.
Refer to the User’s Manual in the bundled CD-ROM for more details.
- This Setup Guide is only for Windows users.
- If you use DN-13007 in Unix/Linux, please refer to the User’s Manual in the
bundled CD-ROM for more details.
. Package Contents
②
Fig10 Network Scanner Interface
6
If any item is missing, please contact the shop where you bought this product.
- One DN-13007 USB MFP Server.
- One DN-13007 MFP Control Center Software CD.
- One DC IN 12V/1A Adaptor.
- This Quick Installation Guide.
. OS Requirements
③
1. Windows 98 SE/ME/2000/XP/2003
2. Unix, Linux , Apple OS X 10.3x and RFC-1179 LPD System
. Physical Description
④
Please refer to Fig 1, Physical Description.
1. Power Adaptor Connector: DC IN 12V/1A adaptor
2. Init Button: print the configuration page and initialize the server
3. Ethernet Connector: a twisted pair category 5 cable
4. USB Host Ports: USB 1.1/2.0 low, full and Hi-Speed compliant
5. Indicators
Power Indicator is lit while power is applied. If it is not lit, or if it blinks,
there is a problem with the MFP server or Power Adapter.
Link Status is lit while network is applied. If it is not lit, it indicates that
the server does not connect the network.
Status Indicator blinks to indicate network activity.
USB1 Indicator is lit while an USB device connects to USB1 Port of the
MFP server. If it is not lit, or if it blinks, there is a problem with the USB
device or the MFP server.
USB2 Indicator is lit while an USB device connects to USB2 Port of the
MFP server. If it is not lit, or if it blinks, there is a problem with the USB
device or the MFP server.
. Connect the DN-13007
⑤
1. Connect DN-13007 to the network, such as a LAN switch or a LAN hub,
using a LAN cable.
2. Connect DN-13007 to USB printers, hard drives or flash ROM disks, and HP
all-in-one series printers (AIO/MFP) using USB cables.
3. Connect DN-13007 to the power jack using the power adaptor (included in
this package).
. Install Utility
⑥
7
Loading...