Digitus DN-13003-2 Service Manual

USB 2.0

ETHERNET PRINT SERVER

Quick Installation Guide

DN-13003-2

Before you start, you should prepare the following items:

 Windows 2000/XP/2003/Vista/7/8/10 computer with print server setup CD

 One Printer(non-GDI/CAPT)

 One Printer cable

 One 802.11b/g/n Access Point (optional)

Wired Network with Print Server:

Printer

Print Server

Factory Default Settings:

 Password:

 IP Address: 192.168.0.10

 Subnet Mask: 255.255.255.0

Hardware Installation:

1. Turn off the printer’s power.

HUB

Computer Computer Computer

2. Connect the print server to your printer with the supplied printer cable.

3. Turn the printer’s power on.

4. Plug the AC power adapter into the power connector on the print server.

5. Wait 40 seconds as part of the print server’s Power On Self Test (POST).

2

Prepare Your Computer to Connect Print Server first:

1. Please specify a proper IP address for your wireless adapter, e.g.192.168.0.101.

Software Installation:

1. To enable network communication with print server, your computer must have a proper

IP address, e.g. 192.168.0.101 (the print server’s default IP is 192.168.0.10)

2. Insert the setup CD into your CD-drive. The autorun program will be started.

3

2. Choose Setup Wizard to install the print server and configure the connected printer.

3. Click Next, the wizard will automatically discover the print server.

4