Digitus DK-1844-005 User Manual

CAT 8.1 S/FTP Patch Cabel

✔ LSZH (Low Smoke Zero Halogen)
✔ Green colored plug for CAT 6

DK-1844-XXX

✔ Kink prot., strain relief, latch prot.
✔ PoE++ ready

Short Description

CAT 8.1 S/FTP Patch Cabel, Twisted Pair Patchkabel, Cu, LSZH, AWG 24/7

Features

- 2x RJ45 (8P8C) connectors

- Boots with kink protection, strain relief and latch protection

- Length marking on boot

- Conductor: Cu (Copper)

- Shielding: S/FTP (complete braid shielding, pairs foil shielded)

- Structure: 4x 2 AWG 24/7, twisted pair

- Sheath: LSZH (Low Smoke Zero Halogen)

- PoE++ ready

Product Overview

The DIGITUS® Category 8.1 Class I patch cables are manufactured and tested according to the ISO/IEC 11801
and DIN EN 50173 CAT 8.1 standards. They guarantee that the cable installation complies with the ISO & EN
channel specification and provide excellent performance in the DIGITUS® CAT 8.1 cabling. The performance
was tested up to 2000 MHz, including performance characteristics such as near-end crosstalk (“NEXT”). The
DIGITUS® patch cables were specifically designed to fully meet all requirements in various application areas.
Each cable is equipped with a molded anti-kink sleeve with strain relief. In addition, the sleeve has a locking
lever protection, which prevents kinking of the cables and breaking-off of the locking lever from the connector.
Category 8.1 is simply identified by the green colored connectors.

Performance- and Specification Overview

Conductor Stranded AWG 24/7 bare copper, 0.2 ± 0.008 mm
Insulations FO-PE (Foamed Polyethylene)
Outer sheath LSZH (Low Smoke Zero Halogen)
Overall diameter 8.0 mm ± 0.2 mm
Bending radius 15x OD
RJ45 connector 3 μ nominal gold flash over 60 μ nickel undercoat contact pins
Color code Orange x White, Green x White, Blue x White, Brown x White
Wiring standard EIA/TIA 586B
Pin assignment 1:1
Durability 750 insertion cycles

Contact resistance 30 mΩ maximum
Resistance unbalance 3% maximum
Dielectric strength 2500 VDC for 3 seconds
Uninsulated resistance 150 MΩ/km minimum
Operating temperature -20 °C up to +60 °
NVP 76%
Flame retardancy IEC 60332-1
Smoke emission IEC 61034
Typical applications IEEE 802.3: 10BASE-T; 100BASE-T; 1000BASE-T
Norms ISO/IEC 11801-1; EN-50173; ANSI/TIA 568-C; EN 60603-7-5
Marking Brand name, cable length and cable information

Product Images

Technical Drawings