Digitus DK-1644-010-BL-OD User Manual

Twisted Pair Outdoor Patch Cable - Category 6 Class E - S/FTP

✔ UV-, acid-, alkali-, corrosion resistant

✔ black colored LDPE outer sheath

✔ with drain wire

✔ Kink prot., strain relief, latch prot.

Abstract

CAT 6, Class E, S/FTP, Twisted Pair Outdoor Patch Cable, Cu, LDPE, AWG 27/7, various lengths available

Features

- 2x RJ45 (8P8PC) connectors

- Boots with kink protection, strain relief and latch protection

- Length marking on boot

- Conductor: Cu (Copper)

- Shielding: S/FTP (complete braid shielding, pairs foil shielded); incl. drain wire

- Structure: 4x 2 AWG 27/7, twisted pair

- Sheath: LD-PE (Polyethylene)

- PoE+ compatible

- UV resistant, acid- & alkali resistant, corrosion resistant

Product Overview

The DIGITUS® Category 6 Class E patch cables are manufactured and tested to the ISO/IEC 11801 and
DIN EN 50173 Category 6 specifications. They will guarantee the installed cabling system is compliant
with the ISO & EN channel specification requirements and will provide optimum performance levels
of DIGITUS® Category 6 cabling. The performance is tested up to 250 MHz inclusive performance
characteristics such as near end cross talk (“NEXT”).
DIGITUS® patch cables are designed and produced to fulfill the highest requirements of various
application areas in full volume.
Each cable is fitted with a molded boot which comes with kink protection and strain relief.
Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking.
With its UV resistant PE sheath, this outdoor patch cable will ensure a secure installation in areas with
a lot of temperature fluctuation and sun expose. Furthermore the drain wire will work as a lightning arrester.

Patch Cable Matrix and Configuration

Patch cables can be wide-ranging. Therefore we prepared
a complete overview of our range, which guides you
to the cable you require.
One E-Mail or one call will be enough and we will send
you the latest version as a PDF file.
You can also check our Patch Cable Configuration tool
on our website www.digitus-professional.com

Freq.

Insertion

Loss

NEXT

RL

ACR-N

ACR-F

PS NEXT

PS ACR-N

PS ACRF

MHz

dB

dB

dB

dB

dB

dB

dB

dB

1.00

4.00

65.00

19.00

61.00

63.30

62.00

58.00

60.30

10.00

6.60

56.60

19.00

50.00

43.30

54.00

47.40

40.30

20.00

9.30

51.60

17.50

42.30

37.20

49.00

39.70

34.20

25.00

10.50

50.00

17.00

39.60

35.30

47.30

36.90

32.30

62.50

16.90

43.40

14.00

26.50

27.30

40.60

23.70

24.30

100.00

21.70

39.90

12.00

18.20

23.30

37.10

15.40

20.30

200.00

31.70

34.80

9.00

3.10

17.20

31.90

0.10

14.20

250.00

35.90

33.10

8.00

-2.80

15.30

30.20

-5.80

12.30

Performance- and Specification Overview

Conductor Stranded AWG 27/7 bare copper, 0.127 ± 0.005 mm
Insulations FO-PE (Foamed Polyethylene)
Outer sheath LD-PE (Low Density Polyethylene)
Overall diameter 5.4 mm ± 0.30 mm
Bending radius 15x OD
RJ45 connector 3 μ nominal gold flash over 60 μ nickel undercoat contact pins
Color code Orange x White, Green x White, Blue x White, Brown x White
Wiring standard EIA/TIA 568B
Pin assignment 1:1
Durability 750 insertion cycles
Contact resistance 30 mΩ maximum
Resistance unbalance 3% maximum
Dielectric strength 2500 VDC for 3 seconds
Uninsulated resistance 150 MΩ/km minimum
Operating temperature -20 °C up to +60 °
NVP 76%
Typical applications IEEE 802.3: 10BASE-T; 100BASE-T; 1000BASE-T
Norms ISO/IEC 11801-1; EN-50173; ANSI/TIA 568-C; EN 60603-7-5
Marking Brand name and cable information by label and printing

Transmission Properties

The results of the chart above are typical for Category 6, Class E patch cables 2 m, 5 m up to 10 m length

Product Number Information