Digitus DK-1643-A-005 User Manual

Twisted Pair Patch Cord - Category 6A Class EA - S/FTP

✔ LSZH

✔ DRAKA UC 900 SS CAT 7 S/FTP PimF

✔ 2x Hirose TM31 plug

✔ Yellow colored plug for CAT 6

A

Abstract

CAT 6A Class EA, S/FTP Twisted Pair Patch Cord, Cu, LSZH, DRAKA UC 900 SS, Hirose TM31, AWG 27/7

Features

- 2x RJ45 (8P8C) connectors; Hirose TM31

- Boots with kink protection, strain relief and latch protection

- Cable DRAKA UC 900 SS CAT 7 S/FTP PIMF

- Conductor: Cu (Copper)

- Shielding: S/FTP (complete braid shielding, pairs foil shielded)

- Structure: 4x 2 AWG 27/7, twisted pair

- Sheath: LSZH

- PoE+ ready

Product Overview

The Category 6A Class E A patch cords are manufactured and tested to the EN-50173-1;
EN-80288-4-2 and ISO/IEC 11801; IEC 61156-6 standard. They will guarantee the installed cabling system
is compliant with the ISO & EN channel specification requirements and will provide optimum performance
levels of Category 6A cabling. The performance of the raw cable is tested up to 1000 MHz inclusive
performance characteristics such as near end cross talk (“NEXT”).
The patch cords are designed and produced to fulfill the highest requirements of various
application areas in full volume.
Each cable is fitted with a molded boot which comes with kink protection and strain relief.
Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking.
You can easily identify the Category 6A, because of the transparent yellow colored connector.

Patch Cord Matrix and Configuration

Patch cords can be wide-ranging. Therefore we prepared
a complete overview of our range, which guides you
to the cable you require.
One E-Mail or one call will be enough and we will send
you the latest version as a PDF file.
You can also check our Patch Cord Configuration tool
on our website www.digitus-professional.com

Performance- and Specification Overview

Conductor Stranded AWG 27/7 bare copper, Ø 0.42 mm
Insulations FO-PE (Foamed Polyethylene)
Outer sheath LSZH (Low Smoke Zero Halogen)
Overall diameter 5.9 mm
Bending radius without tensile loading: ≥ 25 mm; with tensile loading: ≥ 50 mm
RJ45 connector Hirose TM31
Color code Orange x White, Green x White, Blue x White, Brown x White
Wiring standard EIA/TIA 568B
Pin assignment 1:1
Durability 750 insertion cycles
Loop resistance ≤ 340 Ω /km
Resistance unbalance ≤ 3%
Insulation resistance (500 V) ≥ 2000 MΩ *km
Capacity at 800 Hz Nom. 43 nF/km
Capacity unbalance (Pair/Earth) ≤ 1500 pF/km
Characteristic impedance (100 MHz) 100 ± 5 Ω
Propagation velocity ca. 79 %
Signal transit time ≤ 427 ns/100m
Duration difference ≤ 12 ns/100m
Test voltage (DC, 1 min)
Conductor 1000 V
Coupling resistance at 1 MHz: 10mΩ /m; at 10 MHz: 10mΩ /m; at 30 MHz: 30mΩ /m
Coupling attenuation 85 dB
Temperature range during operation: -20 °C up to +60 °C;
during installation: 0 °C up to +50 °C
Flame retardancy IEC 60332-1; IEC 60754-2
Smoke emission IEC 61034
Typical applications IEEE 802.3: 10BASE-T; 100BASE-T; 1000BASE-T; 10GBASE-T
Norms ISO/IEC 11801; EN-50173-1; ANSI/TIA 568-C; EN 50288-4-2
Colors Various colors available on request
Marking Brand name, cable length and cable information