Digitus DK-1613-A-005 User Manual

Twisted Pair Patch Cord - Category 6A Class EA - U/UTP

✔ LSZH (Low Smoke Zero Halogen)

✔ Yellow colored plug for CAT 6

A

✔ Kink prot., strain relief, latch prot.

✔ various lengths and colors available

Abstract

CAT 6A Class EA, U/UTP, Twisted Pair Patch Cord, Cu, LSZH, AWG 26/7, various lengths and colors available

Features

- 2x RJ45 (8P8C) connectors

- Boots with kink protection, strain relief and latch protection

- Length marking on boot

- Conductor: Cu (Copper)

- Shielding: U/UTP (unshielded)

- Structure: 4x 2 AWG 26/7, twisted pair; incl. plastic cross separator

- Sheath: LSZH (Low Smoke Zero Halogen)

- PoE+ ready

Product Overview

The DIGITUS® Category 6A Class E A patch cords are manufactured and tested to the ISO/IEC 11801 and
DIN EN 50173 Category 6 A specifications. They will guarantee the installed cabling system is compliant
with the ISO & EN channel specification requirements and will provide optimum performance levels
of DIGITUS® Category 6A cabling. The performance is tested up to 500 MHz inclusive performance
characteristics such as near end cross talk (“NEXT”).
DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various
application areas in full volume.
Each cable is fitted with a molded boot which comes with kink protection and strain relief.
Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking.
You can easily identify the Category 6A, because of the transparent yellow colored connector.

Patch Cord Matrix and Configuration

Patch cords can be wide-ranging. Therefore we prepared
a complete overview of our range, which guides you
to the cable you require.
One E-Mail or one call will be enough and we will send
you the latest version as a PDF file.
You can also check our Patch Cord Configuration tool
on our website www.digitus-professional.com

Freq.

Insertion

Loss

NEXT

RL

ACR-F

PS NEXT

PS ACRF

MHz

dB

dB

dB

dB

dB

dB

1.00

4.00

65.00

19.00

63.30

62.00

60.30

10.00

6.50

56.60

19.00

43.30

54.00

40.30

20.00

9.20

51.60

17.50

37.20

49.00

34.20

25.00

10.20

50.00

17.00

35.30

47.30

32.30

62.50

16.40

43.40

14.00

27.30

40.60

24.30

100.00

20.90

39.90

12.00

23.30

37.10

20.30

200.00

30.10

34.80

9.00

17.20

31.90

14.20

350.00

40.60

30.30.

6.60

12.40

27.60

9.40

500.00

49.30

27.90

6.00

9.30

24.80

6.30

Performance- and Specification Overview

Conductor Stranded AWG 26/7 bare copper, 0.151 ± 0.005 mm
Insulations HD-PE (High Density Polyethylene)
Outer sheath LSZH (Low Smoke Zero Halogen)
Overall diameter 5.0 mm ± 0.30 mm
Bending radius 8x OD
RJ45 connector 3 μ nominal gold flash over 60 μ nickel undercoat contact pins
Color code Orange x White, Green x White, Blue x White, Brown x White
Wiring standard EIA/TIA 568B
Pin assignment 1:1
Durability 750 insertion cycles
Contact resistance 30 mΩ maximum
Resistance unbalance 3% maximum
Dielectric strength 2500 VDC for 3 seconds
Uninsulated resistance 150 MΩ/km minimum
Operating temperature -20 °C up to +60 °
NVP 68.2%
Flame retardancy IEC 60332-1
Smoke emission IEC 61034
Typical applications IEEE 802.3: 10BASE-T; 100BASE-T; 1000BASE-T; 10GBASE-T
Norms ISO/IEC 11801-1; EN-50173; ANSI/TIA 568-C; EN 60603-7-41
Colors Various colors available on request
Marking Brand name, cable length and cable information

Transmission Properties

The results of the chart above are typical for Category 6A, Class EA patch cords 2 m, 5 m up to 10 m length

Product Number Information