DigiTech GE4056 Instructions Manual

TURNTABLE PLAYER

GE4056

READ INSTRUCTIONS CAREFULLY BEFORE USE AND STORE

IN A SAFE PLACE FOR FUTURE REFERENCE

1

DESCRIPTION

2

1. Turntable

2. Adapter

Use this adapter when playing 45rpm records.

3. Tone arm

4. Cartridge

5. Speed selection

Three speed for choice: 33.3, 45, 78 rpm.

6. Auto stop control

7. Tone arm park

8. USB jack

9. RCA output

Connect this with the plugs to mixer or amplifier,
red for R/H channel, white for L/H for channel.

10. Power switch / rotary volume control

11. AC power cord

Connect this cord to a grounded AC outlet of the proper voltage.

12. Stereo speakers

13. Frosted feet with LED blue light

14. Play&Pause lifter

3

INITIAL STARTING-UP

MAINS CONNECTION

Ensure that the mains voltage of your home corresponds to the operating
voltage of the unit. Your unit is ready to be connected to a mains voltage of
230V/50Hz.

AMPLIFIER CONNECTION

Connect audio plugs to Alert input on your mixer or amplifier:

 Red plug into R/H channel input.
 White plug into L/H channel input.

Playing a record

- Place the record of your choice on the turntable. If it is a 45rpm, do

Not forget to place the adaptor on the record spindle.

- Choose the desired playing speed using the Speed select switch
between 33.3, 45 and 78rpm.

- Turn on the Rotary Power Switch.

- Release the tone arm lock.

- Push in the arm with your hand lightly.

- Place the stylus vertically over the first track of the record the

turntable will start turning automatically.

- Put down the cartridge slowly to the record then the turntable will play.

- When a record comes to the end, the turntable will stop automatically if the

Auto-stop switch is in the ON position. If the switch is in the off position then
it will be suitable for Long Play records.

NOTE:

- Lift up the tone arm and put it on the rest.

- Replace the protective cap on the stylus and close the tonearm lock.

- Turn off power at mains.

4

MAINTENANCE

REPLACING THE STYLUS

-Refer to the figures 1-8

INSTALLING A NEW STYLUS CARTRIDGE

-Refer to the figures 5 & 6

NOTES

We advise you to clean your records with an anti-static cloth to gain maximum
enjoyment from them and to make them last.
We would also point out that for the same reason your stylus should be
replaced periodically (approximately every 250 hours)
Dust the stylus from time to time using a very soft brush dipped in alcohol
(brushing from back to front of the cartridge)

WHEN TRANSPORTING YOUR RECORD PLAYER DO NOT FORGET TO:

 Replace the protective cap on the stylus.
 Put the rest clip into the pick-up arm.

5

Audacity Quick Guide

For the complete manual please check the following website.
http://audacity.sourceforge.net/help/documentation

Before recording and editing music please install the supplied
software first.

To Install Software (PC) & Record

1. Insert the CD that came with your USB turntable.

2. Click on the “ Audacity” file to open it and then click on the
“audacity.exe” to run it. Follow the on screen instructions to
install the program.

3. With the software installed, you can record vinyl records

to your PC.

4. Plug in your turntable to an AC outlet and connect the USB

port on the Turntable to the USB port of your computer.

5. Turn on the power switch on your turntable and open the

audacity program that you have installed.

Software Configuration

1. Select the “Edit” menu and then “ Preferences”

Select the USB audio device under the “ Recording ” selection as shown.

Select “ Software Playthrough” to hear the audio while recording.

Note: The USB Turntable may show up with a different name in

Windows system. This may depend on your computer model
and operating system.

6