Page 1
5 x 1 HDMI 1.4 Switch
AC-1706
User manual
Page 2
1
I. Introduction
This is a high performance 5 HDMI input and 1 HDMI o utput sw itc h. It s upports HDCP repeater
functions and fast switching between a ny of the HDMI input ports. The system supports all 3D
TV formats in addition to a ll HDTV formats up to 4Kx2K. F ur thermore, the r emo te contr ol
gives uses complete control over the selection of sources and makes the device incredibly user
friendly. Low consumption, doe s not require an externa l power s upply f o r no r mal fu nc t io ns .
II. Features
Compliant with HDMI 1.4a, C TS 1.4a, DVI 1.0 standards
HDMI 1.4 support: 3D TV support
Support 3D Video & 4Kx2K, 8, 10, 12 & 16 bits per co lor dept h
Audio support:
Dolby TrueHD
DTS-HD Master Audio 7.1CH
Page 3
2
III. Package
5x1 HDMI 1.4 Switcher
Remote control
Operatio n Ma nua l
IV. Specifications
Freque nc y B a nd w id th 2.97Gbps
Input Ports 5 HDMI Female por ts
Output port 1 HDM I Female por t
HDMI Audio Output PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1, D-TrueHD, DTS-HD
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Di mensio ns (mm) 87(D) x59.5 (W) x 19(H)
Weight (g) 60
Page 4
3
V. 5×1 Switch Parts List
Page 5
4
VI. 5×1 Swi tch Operation Contr ol s and Functio ns
1. Source Selection Button:
Press this button to select any sources, i.e. Blu-ray, Ga me C o ns o le, Set Top Box, etc, which
is c onnected to the input and indic ated by the number of the input
2. IR Receiver:
This switcher includes a remote control, switching between sources can be controlled from
the remote control. Ensure to aim the remote toward s this recei ver w hen using the r emote .
3. Power LED :
This LED will turn on once pow er is applied to indicate a wo rk in g state.
4. Source Indicator:
When a source is selected, the LED underneath the corresponding input will illuminate to
indicate the selected source.
Page 6
5
5. 1 x Front Input:
A single HDMI input are located on the front of the device. Connect a HDMI source to this
input.
6. Output:
Connect the output of the switcher to a monitor or HDTV that is equipped with a HDMI
socket. The selected source will be displayed from this output.
7. 4 x Rear Input s:
4 HDMI inputs are located on the rear of the device. Connect a HDMI source to any o f
these inputs.
8. Power Input:
This switcher does not require power to switch between the 5 available sources. The power
input is available in cases where one or all HDMI leads is or exceeds 5 metres in le ngt h.
Page 7
6
VII. Remote control
① IN1、IN2、IN3、IN4、IN5： Press any of the
“IN”put numbered buttons and the LED will
indicate the corresponding selected input source.
：Press this b utton to cycle th rou gh the available
input source and the LED will indicate the
cor r esponding i nput sour ce.
②③④ HAS NO function.
Loading...