12X Zoom Vandal Dome Camera
DWC-V1312XW
Before installing and using the Digital Watchdog Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
FEATURES
PARTS
DIMENSIONS IN MILLIMETERS
INSIDE THE BOX
CAMERA INSTALLATION INSTRUCTIONS
JUNCTION BOX INSTALLATION INSTRUCTIONS
WALL MOUNT INSTALLATION INSTRUCTIONS
PENDANT MOUNT INSTALLATION INSTRUCTIONS
CORNER MOUNT INSTALLATION INSTRUCTIONS
CONNECTING TO MONITORS
ADJUSTING THE 3-AXIS GIMBAL
CONTROL BOARD
OSD MENU AND GLOSSARY
TROUBLESHOOTING
WARRANTY INFORMATION
LIMITS AND EXCLUSION
SPECIFICATIONS
4
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20
21
1/4” Sony EX-View HAD Double Scan CCD
600 TV Lines
3.6-44.3mm Varifocal Auto Iris Lens
12X Optical Zoom
Electronic Day and Night with Color Removal Circuit
WDR (Wide Dynamic Range)
3D-DNR (3D Digital Noise Reduction)
Star-Light (Super Low Light Technology)
DIS (Digital Image Stabilizer)
Programmable Privacy Zones (12) & Motion Detection
AGC / BLC / AWB
On-Screen Menu Programming with Built-in Joystick
Auto Sensing 24VAC/12VDC with Line Lock
Secondary Video-BNC Output for Easy Installation
RS-485 Built-in
IP66 Certified (Weatherproof)
Lens
1
Video Output Connector - BNC
2
3
Power Input COnnector
12VDC/24VAC Dual Voltage
4
RS485: BK(D+), WH(D-)
5
Rubber Band
6
Black Dome Insert
7
Bubble Dome
8
Upper Case
9
Assembly Screws
T20 M4X16
10
NPT Plug
11
Bottom Case
12
Rubber Pad
13
Mounting Screws
DIMENSIONS IN MILLIMETERS*
UNITS :MM
INSIDE THE BOX*
The following items are included with the V1312XW camera.
1. User Manual
2. Mounting Template
3. Four (4) Screws and Four (4) Dry Wall Anchors
4. Second Video Output Connector
5. L-Wrench
6. Tool - 0.89mm
7. Tool - 1.5/2.0mm
Required Tools (Not Included)
Phillips Head Screwdriver
1
2
3
5 6
4
7
CAMERA INSTALLATION INSTRUCTIONS*
1. Pull wires through and make connections.
Refer to page 13. Use mounting template to
mount the camera with dry wall mounts and
wood screws.
1. Use the joystick to adjust the OSD menu.
See page 15, 16, 17 for details.
2. Adjust the camera’s pan, tilt, and zoom.
See page 14 for details.
2. Attach the camera housing to the junction box
using the machine screws.
JUNCTION BOX INSTALLATION INSTRUCTIONS*
1. Check to see all parts are in
the box.
4. Attach the camera to the
junction box using the machine
screws
2. Use the dry wall anchors and
wood screws to mount the
junction box and rubber gasket
to the wall
5. Attach the camera housing to
the junction box using the
machine screws.
3. Insert wires through the wall
and make the appropriate
connections.
WALL MOUNT INSTALLATION INSTRUCTIONS*
1. Check to see all parts are in
the box.
4. Use the mounting template to
make pilot holes. Use the dry
wall canchors and wood screws
to attach the assembly to the
wall.
2. Insert the wires from the
camera through the wall mount
housing.
5. Attach the camera housing to
the fixture.
3. Attach the camera to the wall
mount housing.
PENDANT MOUNT INSTALLATION INSTRUCTIONS*
1. Check to see all parts are in
the box.
4. Attach the camera to the
pendant mount using the
machine screws.
2. Attach the top shield to the
pendant mount.
5. Attach the camera housing to
the fixture.
3. Slide the wires from the camera
through the pendant mount.
6. Use the mounting template to
make the pilot holes. Mount the
camera assembly to the ceiling
using wall mount anchors and
machine screws.
CORNER MOUNT INSTALLATION INSTRUCTIONS*
1. Check to see all parts are in the box.
3. Attach the wall mount bracket to the corner
mount using the machine screws.
2. Attach the two compression fittings to the corner
bracket.
4. Mount the camera assembly to the corner of the
wall, using dry wall anchors and machine
screws.
CONNECTING TO MONITORS*
Follow the diagram below to make proper connections to the CRT Monitor or the Monitor.
12VDC / 24VDC
CCTV Monitor
Right
Dow
Up
2nd Video Output
Monitor
30cm
Power Connection: Dual Voltage 12VDC/24VAC (Auto Polarity Detection and Protection)
All cameras are equipped with a service monitor output, which is located on the camera module.
n
Left
ADJUSTING THE 3-AXIS GIMBAL*
The Gimbal Mechanism yields maximum rotation and placement as shown below:
Rotation 360
Z-Axis: Rotation 360
Y-Axis: Tilt 90
X-Axis: Pan 360
o
o
o
o
o
Pan 360
Tilt 90
o
CONTROL BOARD*
Control Board Functions
1. Joystick Controller: Control of On-Screen Display Menu
2. CON1: Second Video Output Connector
3. CON2: RS-485 Connector
Joystick Controller
CON2
UP
RIGHT
DOWN
LEFT
CON1
OSD MENU AND GLOSSARY*
MAIN MENU DESCRIPTION
CAMERA SET Camera Related Functions and Data
INTELLIGENCE Motion Detection, Etc.
PRIVACY ZONE Privacy Related Settings
PRESET SET Preset Position and Preset ID
OTHER SET
COMMUNICATION Communication Settings
SYSTEM INFO Displays System Information
LANGUAGE OSD Menu Laguage Settings
CAMERA SET DESCRIPTION OPTIONS
CAMERA ID Name the Camera. 2 Lines and 52 Characters OFF / ON
IRIS Turn on Iris and the BLC and WDR Feature ALC (-32~32) / MANUAL (-32~32)
AGC(MOTION) Set the Max Gain under Low Light OFF / ON(Max.Level Setting)
DNR Digital Noise Reduction OFF / LOW / MID / HIGH/ USER(1~16)
SHUTTER High Shutter Speed 1/60(1/50)~10Ksec
SENS-UP Slow Shutter Speed OFF / FIX X2~AUTO X256
FLICKERLESS Shutter Speed OFF / ON
DIS Digital Image Stabilization OFF / ON
DAY/NIGHT Set Day or Night Mode and Level AUTO / EXT / DAY / NIGHT
WHITE BAL White Balance Mode
FOCUS MODE Select the Focus Mode MF / ONEAF / AF
ZOOM SPEED Zoom Speed 1~4
DISPLAY ZOOM Display Zoom Ratio OFF / ON
DIGITAL ZOOM Set Digital Zoom Ratio OFF~X12
DETAIL Aperture Gain Set 0~3
V-SYNC Set Internal/Line Lock Mode INTERNAL / LINE LOCK
AGC COLOR SUP Amount of Color Suppression LOW / MID / HIGH
Configure for Factory Defaults, Etc.
ATW1 / ATW2 / AWC / 3200K / 5600K
REVERSE Horizontal/Vertical Reverse OFF / H / V / HV
POSI/NEGA Positive or Negative Video Output - / +
PIP Picture In Picture at Digital Zoom Operation OFF / ON
INTELLIGENCE DESCRIPTION OPTIONS
MOTION Motion Detection OFF / TRACKING / DETECTION
ADVANCED Advanced Motion Detection OFF / FIXED / MOVED
MASK AREA
DISPLAY Motion Detection Display OFF / ON
Motion Detection Sensitivity 1~7
SENSITIVITY
RESOLUTION Motion Detection Resolution 1~5
ALARM OUT Set Alarm Out OFF / ON
PRIVACY ZONE DESCRIPTION OPTIONS
PRIVACY SET Set the Privacy Zone 1~12
STYLE Set the Privacy Style COLOR / MOSAIC 1~4
PRESET DESCRIPTION OP TIONS
PRESET SET Set the Preset 0~255
OTHER SET DESCRIPTION OPTIONS
LANGUAGE Select Language of OSD Menu
FACTORY DEFAULTS Set the Factory Default Setting
OSD COLOR Set OSD Menu Color BW / R / G / B
COMMUNICATION DESCRIPTION OPT IONS
PROTOCOL Protocol Set
BAUD RATE Protocol Set 2400 / 4800 / 9600 / 19200
ADDRESS Protocol Set 1~255
SYSTEM INFO DESCRIPTION OPT IONS
SYSTEM INFO Camera Setting Information
Motion Detection Exception Area 1~4
ENGLISH / FRANCAIS / ESPANOL /
JAPANESE / KOREAN / PORTUGUESE
PELCO-D / HONEWELL / SAMSUNG / VICON /
PANASONIC / BOSCH / PELCO-P / GE
TROUBLESHOOTING
Before sending your camera for repair, check the following or contact our technical specialist.
No VIDEO
Check the coaxial cable and make sure it is connected securely.
Check the lens’ iris adjustment at the menu setup of the camera.
Check the power supply and make sure the camera has the proper voltage and current.
Out-of-Focus VIDEO
Check the clear dome cover and the lens for dirt or fingerprints. Use a soft cloth and gently clean.
Check the lens manual focal and zoom adjustment. Field test monitor is recommended.
SPECIFICATIONS*
Device 1/4” SONY EX-View HAD PS CCD (ICX-448)
CCD
Sync.
System Info
Performance
Lens
Functions
Total 811 x 508
Effective
Inter. H/V
LL H/V
Horizontal Resolution
Minimum Illumination
(F1.6/Wide)
S/N Ratio 52dB
Focal Length f=3.6~44.3mm, F1.6(Wide)/F2.0(Tele)
Drive Type Auto (DC)
M.O.D Wide: 0.2m , Tele: 0.8m
View Angle Tele: 4.64°(H) x 3.52°(V), Wide: 54.44°(H) x 41.42°(V)
OSD E/F/S/J/P , (E/K) E/F/G/S/I , (E/R/Po/T/Cz), (Chinese)
Privacy Zone 12 Zones (Square)
Day & Night COLOR/BW/AUTO/EXT (with D/N Filter Assy)
Motion Detection
Digital Zoom x1~x12 (x0.1 STEP)
High Speed Shutter 1/60(1/50) ~ 1/10Ksec
Flickerless
Sens Up (Low Shutter) x2 ~ x256
DWC-V1312XW
768 x 494
15,734 / 59.94Hz
15,750 / 60Hz
More than 560TVL (Color) / 600TVL (B&W)
Color Mode 50 IRE 25 IRE
Sens Off
Sens x256 0.004 Lux 0.002 Lux
BW Mode 50 IRE 25 IRE
Sens Off
Sens x256 0.0004 Lux 0.0002 Lux
OFF / ON (4 Masking Areas)
OFF / ON
1.2 Lux 0.6 Lux
0.12 Lux 0.06 Lux
BLC
AGC
ALC(Auto Level Control) Auto(DC)/Manual (Level Control)
Line Lock
Camera ID
White Balance
DNR
DIS
PRESET
WDR
Intelligent Video Yes (Moved/Fixed)
Etc. Function Detail, Reverse(H/V), Posi/Nega, PIP
Video Output VBS 1.0V p-p (75ohm Terminated)
Power
Operating Temperature Absolute : -10°C ~ +50°C
Operating Humidity Less than 90%
Power Input DC : +10V ~ 16V / AC : 20V ~ 28V
Power Consumption DC : Max 2.8[W] AC : Max 3.2[W]
OFF / ON (Area Setting)
OFF / ON (Max Level Setting)
OFF / ON (Phase Control)
OFF / ON (Maximum 54 Each and 2 Line)
ATW1/ATW2/AWC/MANUAL
(ATW1 : 2,500 ~ 9,500°K, ATW2 : 2,000 ~ 10,000°K)
OFF / ON (Adaptive 3D + 2D)
OFF / ON
OFF / ON (256 Each)
OFF / ON
MEMO
Loading...