Digital Watchdog DWC-T8553TIR, DWC-T8563TIR Quick Start Guide

Quick Start Guide Quick Start Guide

Power Cabl e

V i deo Out put

V i deo Swi t ch Cable

DWC-T8553TIR DWC-T8563TIR

STEP 1 – PREPARING TO MOUNT THE CAMERA

1. The mounting surface must withstand three times the weight of your camera.

2. Do not let the cables get caught in improper places or the electric line cover

can be damaged. This may cause a short or re.

3. Using the mounting template sheet or the camera itself, mark and drill the

necessary holes in the wall or ceiling.

4. Do not remove the protective lm until the installation is completed.

STEP 2 – CABLING THE CAMERA TO EXTERNAL DEVICES

Template
Sheet

1

3

WHAT’S IN THE BOX

1 Set

Tapping
Screws PA
4x35 – 4pcs

Plastic Plugs
– 4pcs

QSG Manu al 1 Set

Mounting
Template

Rubber Plug 1 Set Tor x Wre nch 1 Set

NOTE: Download All Your Su pport Materials and Tools in One Place

1. Go to: http://w ww.digital-watchdog.com/support-download/

2. Search your product by entering the par t number in the ‘Search by Product’ search

bar. Results for applicable part numbers will populate autom atically b ased on the
part number you enter.

3. Click ‘Search’. All supported material s, including manuals and quick start guide

(QSGs) wil l appear in the results.

Attention: This document is intended to serve as a quick reference for initial
set-up. It is recommended that the user re ad the entire instruction manual for
complete and proper installation and usage.

Tel: [phone]

Technical Support Hours:
9:00AM – 8:00PM EST, Monday thru Friday

digital-watchdog.com

1 Set

1 Set

5. Pass the wires through the mount bracket and make all necessary

connections. Connect the BNC cable and power cables to the camera.

Power Requirements Power Consumption

12VDC ONLY!

CAUTION! The camera supports DC power supply only

IR on: < 4W
IR off: < 1W

STEP 3 – CHANGING SIGNAL IN THE CAMERA

The camera supports three analog signals: HD-Analog, HD-TVI, HD-CVI and
analog signal up to 960H.

6. In order to swith the camera’s signal between the available options, locate

the button switch on the signal cable. The video outputs will recycle by holding
and pressing the button in the video switch cable for 5 seconds.

NOTE: The camera’s factory default resolution is 4MP at 30fps. However, the cam era

can display video u p to 5MP resolution at 20fps. In order to cha nge the camera’s
resolu tion, go to the ca mera’s OSD menu > ADJUST > OUTPU T MODE.

STEP 4 – INSTALLING THE CAMERA

7. Adjust the camera to obtain an optimum angle by loosening the lock screws.

Tighten the lock screws after you nish adjusting the view angle of the
camera.

8. If your camera supports a varifocal lens (DWC-T8563TIR models only), you

can adjust the camera’s zoom and focus from the camera’s OSD menu via
UTC. See the user manual for more information.

AF

1. AF MODE SEMI

2. ONE SHOT AF

3. TDN A F OFF

4. LEN S INIT

5. RETURN RET

9. Remove the protection lm softly to complete the installation.

6

Rev Date: 11/18

2

4

Rubber
Plug

7

Lock
Screw

Video Output

Vide o Switch Cable

Power Cable

Specications and pricing are subject to change without notice.

Copyright © Digit al Watchdog. A ll rights reserved.