Digital Watchdog DWC-C273W User Manual
ANALOG HIGH DEFINITION
Box Camera
DWC-C273W
ABOUT MANUAL
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
06/2015
PRECAUTIONS
Do not open or modify.
Do not open the case except during maintenence and installation,
for it may be dangerous and can cause damages.
Do not put objects into the unit.
Keep metal objects and flammable substances from entering the camera.
It can cause fire, short-circuits, or other damages.
Be careful when handling the unit.
To prevent damages, do not drop the camera or subject it to shock or vibration.
Do not install near electric or magnetic fields.
Protect from humidity and dust.
Protect from high temperature.
Be careful when installing near the ceiling of a kitchen or a boiler room,
as the temperature may rise to high levels.
Cleaning:
To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.
Mounting Surface:
The material of the mounting surface must be strong enough to support the camera.
FCC COMPLIANCE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference, when the equipment is operated in a residential environment. This
equipment generates, uses, and radiates radio frequency energy; and if it is not installed and used in
accordance with the instruction manual, it may cause harmful interference to radio communications.
WARNING: Changes or modifications are not expressly approved by the manufacturer.
2
TABLE OF CONTENTS
Table of Contents
Introduction
Installation
Module OSD Menu
Troubleshooting
Warranty Information
Specifications
Features
Parts and Descriptions
Dimensions
Inside the Box
Installation Instructions
4
5
6
7
8
9-21
22
23-24
25-26
3
FEATURES*
Analog High Definition (AHD) HD over Coax Technology
STAR-LIGHT™ Super Low Light Technology
Panasonic 1/3" CMOS Sensor
1080P Resolution at 30fps
Wide Dynamic Range (WDR)
Compatible with C/CS Mount Lens
Smart DNR™ 3D Digital Noise Reduction
Highlight Masking Exposure (HME)
True Day/Night Mechanical IR Cut Filter
Auto Sensing 24VAC/12VDC with Line Lock
Easy Icon Driven OSD Menu with Built-in Joystick
Programmable Privacy Zones
Auto Gain Control (AGC)
Back Light Compensation (BLC)
Dynamic Range Compressor (DRC) Reveals Low Light Detail
Auto White Balance (AWB)
1 Alarm Output
RS-485 Built-in
4
PARTS & DESCRIPTION*
3
1
Lens Connector
2
Box Camera
3
Mounting Bracket Connectors
4
DC-Iris Socket
5
Alarm +/-
6
RS485 Connector
7
OSD Control Arrows and Enter Buttons
8
Power LED
9
BNC Video Output
10
AC / DC Power Input Terminal Block
NOTE: For optimal performance, a 1/2.8" Mega Pixel Lens is recommend
1
2
4
5
6
8
7
9
10
Set Screw
5
DIMENSIONS IN MILLIMETERS (IN)*
(1.87”)
6
47.6
14.5(0.57”)
119.7(4.71”)
119.7(4.71”)
131.8(5.19”)
62.0(2.44”)
58.8(2.31”)
55.0(2.17”)
62.0(2.44”)
55.0(2.17”)
58.8(2.31”)
INSIDE THE BOX*
Included with your Box Camera
2P Terminal Block
Mini-DIN Connector
(For Video or DC Auto Iris Lens)
C-Mount Adaptor
ANALOG HIGH DEFINITION
Box Camera
DWC-C273W
ABOUT MANUAL
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Manual
RS-485 Cable
05/2015
7
INSTALLATION INSTRUCTIONS*
UNC TAP CAMERA MOUNTING HOLE
1
Using an appropriate mounting bracket, mark and drill the
necessary holes to mount the bracket to a wall or ceiling.
2
Attach the mounting bracket to the surface using
machine screws.
3
Attach the box camera to the mounting bracket using
the UNC TAP mounting holes on the top of the camera
housing. Rotate the camera until tightly secured to the
mounting bracket.
4
Adjust the camera’s position to the desired view and angle.
5
Connect an appropriate lens to the camera lens connector by twisting the lens clockwise.
The camera is compatible with any C or CS mount lens. For “C” lenses, please use the provided
Adapter Ring. *Lens is not included.
6
Connect the lens’ cable to the box’s A-Iris Socket.
7
Adjust the lens’ zoom and focus accordingly. Consult the manual of the lens for additional
information.
NOTE: For optimal performance, a 1/2.8" Mega Pixel Lens is recommend
8
MODULE OSD MENU*
EXPOSURE
LENS
MANUAL / AUTO
BACKLIGHT
OFF / HME / BLC / WDR
DRC
OFF / LOW / MIDDLE / HIGH
DEFOG
OFF / ON
AGC
0~10
STARLIGHT
OFF / x2 ~ x32
3D DNR
OFF / LOW / MIDDLE / HIGH
EXIT JUMP
SAVE & EXIT / EXIT
MOTION
MOTION
OFF / ON
DET. WINDOWS
SENSITIVITY
0 ~ 10
MOTION OSD
OFF / ON
TEXT ALARM
OFF / ON
SIGNAL OUT
OFF / ON
EXIT JUMP
SAVE & EXIT / EXIT
COLOR
WB BAL.
AUTO / AUTO-EX / PRESET
/ MANULAL
COLOR GAIN
0 ~ 20
EXIT JUMP
SAVE & EXIT / EXIT
PRIVACY
BOX
OFF / ON
POLYGON
OFF / ON
EXIT JUMP
SAVE & EXIT / EXIT
DAY & NIGHT
D&N MODE
AUTO / COLOR / BW / EXTERN
AGC THRES
0 ~ 20
AGC MARGIN
0 ~ 20
EXT LED
OFF / AUTO
DELAY
LOW / MIDDLE / HIGH
SMART IR
0 ~ 20
EXIT JUMP
SAVE & EXIT / EXIT
SETUP
COMMUNICA.
CAM TITLE
OFF / ON
IMAGE RANGE
FULL / COMP / USER
FRAME RATE
720_50P/60P / 720_25P/30P
/ 1080_25P/30P
FREQUENCY
50Hz / 60Hz
LANGUAGE
ENG / CHN / CHN (S) / JPN / KOR
DEFECT DET
ON
INITIAL
ON
EXIT JUMP
SAVE & EXIT / EXIT
FUNCTION
SHARPNESS
0 ~ 10
GAMMA
0.45 ~ 0.75
MIRROR
OFF / ON
FLIP
OFF / ON
D. ZOOM
x1.0 ~ x16.0
EXIT JUMP
SAVE & EXIT / EXIT
EXIT
SAVE
RESTORE
EXIT
9
Loading...