How it Works
Digital Watchdog
Loading...
DWC-C223W
Specsheet
1 pgs289.42 Kb0
User Manual
32 pgs6.03 Mb0

Digital Watchdog DWC-C223W User Manual

Download
STAR-LIGHT Universal HD
over Coax
DWC-C223W
User’s Manual Ver. 08/17
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
TM
Box Camera
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance
WARNING
To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.
WARNING
1. Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter could cause fire, electrical shock, or damage to the product
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or damage to the product.
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat generation or fire.
4. Securely plug the power cord into the power receptacle. Insecure connection may cause fire.
5. When installing the camera, fasten it securely and firmly. A falling camera may cause personal injury.
6. Do not place conductive objects (e.g. screw drivers, coins, metal things, etc.) or containers filled with water on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects.
3
Safety Information
7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.
8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way.
10. When cleaning, do not spray water directly onto parts of the product.
Doing so may cause fire or electric shock.
PRECAUTION
Operating
.
Before using, make sure power supply and all other parts are properly connected.
.
While operating, if any abnormal condition or malfunction is observed, stop using the camera
immediately and contact your dealer.
Handling
.
Do not disassemble or tamper with parts inside the camera.
.
Do not drop the camera or subject it to shock or vibration as this can damage the camera.
.
Clean the lens with extra care. Scratches and dust can ruin the quality of the camera image.
Installation and Storage
.
Do not install the camera in areas of extreme temperature, exceeding the allowed range.
.
Avoid installing in humid or dusty environments.
.
Avoid installing in places where radiation is present.
.
Avoid installing in places where there are strong magnetic elds and electric signals.
.
Avoid installing in places where the camera would be subject to strong vibrations.
.
Never expose the camera to rain or water.
4
Important Safety Instructions
1. Read these instructions.
All these safety and operating instructions should be read before the product is installed or operated.
-
2. Keep these instructions.
The safety, operating and use instructions should be retained for future reference.
-
3. Heed all warnings.
All warnings on the product and in the operating instructions should be adhered to.
-
4. Follow all instructions.
All operating and use instructions should be followed.
-
5. Do not use this device near water.
For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; near a swimming pool; etc.
-
6. Clean only with dry cloth.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.
-
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product, and
to protect it from over-heating. The openings should never be blocked by placing the product on bed, sofa, rug or
other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided and the manufacturer’s unstructions have been adhere to.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
5
Important Safety Instructions
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specied
by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Disposal of Old Appliances
1. When this cr product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately form the municipal waste stream stream in accordance to laws designated by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interferenece at his own expense.
ossed-out wheel bin symbol is attached to a product it means the
6
Features
Universal HD over Coax™ Technology with HD-Analog, HD-TVI, HD-CVI and all
Analog to 960H Signal Support
STAR-LIGHT™ Super Low Light Technology
1/3" Image Sensor
2.1MP, 1080p Resolution at 30fps
Compatible with C/CS Mount Lens
Wide Dynamic Range (WDR)
OSD Control Via Coaxial (UTC)
Smart DNR™ 3D Digital Noise Reduction
Electronic Day/Night
De-Fog™ Extreme Weather Image Compensation
Highlight Masking Exposure (HME)
Auto Sensing 24VAC/12VDC with Line Lock
Easy Icon Driven OSD Menu with Built-in Joystick
Programmable Privacy Zones
Auto Gain Control (AGC)
Backlight Compensation (BLC)
Dynamic Range Compressor (DRC) Reveals Low Light Detail
Auto White Balance (AWB)
5 Year Warranty
7
Product & Accessories
Please check if all the camera and accessories are included in the package.
Camera
Alarm Out / RS485 Cable 2P Terminal Block CS Mount Wrench
ManualC-Mount Adapter
8
IRIS Plug
Part name
Mounting Bracket Connectors
Back focus adjustment bolt
CS Mount adapter
Sensor Protection cap
Alarm +/-, RS485
BNC Video Output
Box Camera
DC-Iris Socket
Power LED
OSD Control Arrows and
Enter Buttons
AC/DC Power Input
Terminal Block
9
Dimension
Unit : Inches (mm)
2.44"
(62mm)
4.7" (119.7mm) 2.44" (62mm)
2.1"
(55mm)
4.7" (119.7mm)
10
2.3" (58.8mm)
2.1"
(55mm)
Installation-
11
Instructions
If you are using an automatic iris lens with the camera, the lens has to be connected to the DC-Iris socket of the camera. If you are using a lens with manual or xed iris, this socket is not used.
CS-Mount Lens
1
Before mounting a lens, please check whether it is a C-mount or CS-mount lens. The back focus is set for the CS-mount lens at the factory.
2
After removing the protective cap, attach the lens into the camera by rotating it clockwise.
:
NOTE
Lens not included.
C-Mount Lens
1
Attach the C-Mount lens adapter by turning clockwise.
2
Attach the lens to the camera by turning clockwise.
:
NOTE
Lens not included.
4
3
DC-IRIS
1
2
DC Driven (DC)
1. Control +
2. Control -
3. Drive +
4. GND
:
NOTE
When a lens is mounted, adjustment of the backfous may be required. Adjust with the adapter when the correct focus cannot be optained. After adjusting the backfocus, tighten the backfous bolt. Backfocus adjustment bolt is released from the factory, It should be adjusted when setting.
C-Mount Adapter
CS-Mount Lens
C-Mount Lens
Connecting to DVR/Encoder
12
Use the diagram below to connect to an Universal DVR or CRT Monitor properly.
12VDC/24VAC
COAX
CCTV Monitor
- Power Connection : 12VDC/24VAC Dual Voltage. (Auto Polarity Detection and Protection)
- OSD Joystick : The function setting and video output can be adjusted with OSD joystick. (default : HD-A)
Image Mode
Switches to HD-TVI mode when press OSD Joystick to left 5sec or longer. Switches to HD-A mode when press OSD Joystick to right 5sec or longer. Switches to CVBS mode when press OSD Joystick to up 5sec or longer. Switches to HD-CVI mode when press OSD Joystick to down 5sec or longer.
- RS485 Connectors : Connect the camera to a controller or the Monitor using RS485.
- Alarm Output Cable : Cable to output Motion Detection signal.
Troubleshooting
25
Before sending your camera for repair, check the following or contact our technical specialist.
FOR NO VIDEO
Check the coaxial cable and make sure it is connected securely.
Check the power supply and make sure the camera has the proper voltage and current.
FOR OUT-OF-FOCUS VIDEO
Check the lens for dirt or ngerprints. Use a soft cloth and gently clean.
The use of a eld test monitor is recommended.
Specications
26
VIDEO
Image Sensor 1/3” CMOS Sensors
Active Pixels 1944(H) x 1092(V)
Scanning System Progressive scan
Freguency Signal Technology
Synchronization
Resolution
Minimum Scene Illumination
S/N Ratio 55dB
Video Output
LENS
Lens Type Mount Type
OPERATIONAL
Alarm Output Shutter Speed 1/30(25) - 1/30,000
Backlight
Starlight OFF, x2 - x32 Wide Dynamic Range(WDR) LOW/MIDDLE/HIGH
60Hz / 50Hz
2.0 Megapixel Universal
Internal
1920x1080 (1080p30fps)
F1.2 (30IRE): 0.02 Lux (Color)
F1.2 (30IRE): 0.005 Lux (B/W)
BNC (Universal : HD-A/HD-TVI/HD-CVI/CVBS)
Manual/DC C/CS
1 Alarm Output
OFF/HME/BLC/WDR
Specications
27
OPERATIONAL (CONT.)
Digital Noise Reduction OFF / LOW / MIDDLE / HIGH
White Balance AUTO / AUTO-EX / PRESET / MANUAL
Day and Night AUTO / COLOR / BW / EXTERN
ENVIRONMENTAL
Operating Temperature Operating Humidity
IP Rating
Other Certications FCC, CE, ROHS
ELECTRICAL
Power Requirements DC12V / AC24V Dual Voltage
Power Consumption DC12V : 2.45W, 200mA
MECHANICAL
Housing Material and Dimensions
Weight 0.55 lbs
0 ~ 10Auto Gain Control ON/OFF (4 Zones)Motion Detection
ON/OFF (16 Zones)Privacy Zones
0 ~ 10Sharpness
0.45 ~ 0.75Gamma
RS485Remote Control
-4°F ~ 122°F (
No more than 90% (Non-Condensing)
-
AC24V : 2.4W, 142mA
Metal,
-20°C ~ 50°C)
4.71 x 2.31 x 2.48 in (119.7 x 58.8 x 62mm)
Limits & Exclusions
There are no express warranties except as listed. The warranter will not be liable for incidental or consequential damages (including damage to recording media without limitation) resulting from the use of these products warranty. All express and implied warranties, including the warranties of merchantability and fitness for particular purpose, are limited to the applicable warranty period set forth above.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions or limitations listed above may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state-to-state.
If the problem is not handled to your satisfaction, then write to the following address: Digital Watchdog, Inc.
ATTN: RMA Department 5436 W. Crenshaw Street Tampa, FL 33634
Service calls which do not involve defective materials or workmanship as determined by the Warranter, in its sole discretion, are not covered. Costs of such service calls are the responsibility of the purchaser.
or arising out of any breach of the
28
Warranty Information
Digital Watchdog (referred to as “the Warranter”) warrants the Digital Watchdog Camera against defects in materials or workmanship as follows:
LABOR: For the initial five (5) years and one (1) year on IR LED from the original purchase date, if the camera is determined to be defective, the Warranter will repair or replace the unit with a new or refurbished product at its option at no charge.
PARTS: In addition, the Warranter will supply replacement parts for the initial five (5) years and one (1) year on IR LED.
T
o obtain warranty or out of warranty service, please contact a Technical Support Representative at 1+ (866)446-3595 Monday through Friday from 9:00AM to 8:00PM Eastern Standard Time.
A purchase receipt or other proof of the original purchase date is required before warranty service is rendered. This warranty only covers failures due to defects in materials and workmanship which arise during normal use. This warranty does not cover damage which occurs in shipment o failures which result from accident, misuse, abuse, neglect, mishandling, misapplication, alteration, modification, faulty installation, signal pickup, maladjustment of consumer controls, improper operation, power line surge, improper voltage supply, lightning damage, rental use of the product or service by anyone other than an authorized repair facility or damage that is attributable to acts of God.
r failures which are caused by products not supplied by the Warranter or
set-up adjustments, improper antenna, inadequate
29
Notes
30
Notes
31
&BTU$PBTU)FBERVBSUFST0GGJDF8$SFOTIBX4U5BNQB'-
8FTU$PBTU)FBERVBSUFST0GGJDF#MPPNGJFME"WF$FSSJUPT$"
1)'"9
XXX%JHJUBM8BUDIEPHDPN5FDIOJDBM4VQQPSU
64"$BOBEB
*OUFSOBUJPOBM
'SFODI$BOBEJBO
4VQQPSU)PVST.POEBZ'SJEBZBNUPQN&45
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use