Digital Watchdog DWC-BL5363D User Manual

Starlight BL5363D

User Manual Version #2:
Camera with ICON Menu

11192010

PRECAUTIONS

 Do not open or modify.
 Do not open the case except during maintenance and installation, for it may be dangerous and can cause damages.
 Do not put objects into the unit.
 Keep metal objects and flammable substances from entering the camera. It can cause fire, short-circuits, or other damages.
 Be careful when handling the unit.
 To prevent damages, do not drop the camera or subject it to shock or vibration.
 Do not install near electric or magnetic fields.
 Protect from humidity and dust.
 Protect from high temperature.
 Be careful when installing near the ceiling of a kitchen or a boiler room, as the temperature may rise to high levels.
 Cleaning
 To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.
 Mounting Surface
 The material of the mounting surface must be strong enough to support the camera.

FCC COMPLIANCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to Provide reasonable protection against harmful interference .when the equipment is operated in a residential environment. This equipment
generates, uses, and radiates radio frequency energy; and if it is not installed and used in accordance
with the instruction manual, it may cause harmful interference to radio communications.

WARNING: Changes or modifications are not expressly approved by the manufacture.

TROUBSHOOTING

Before sending your camera for repair, check the following or contact our technical specialist.

No VIDEO

Check the coaxial cable and make sure it is connected securely.
Check the lens’ iris adjustment at the menu setup of the camera.
Check the power supply and make sure the camera has the proper voltage and current.

Out-of-Focus VIDEO

Check the clear dome cover and the lens for dirt or fingerprints. Use a soft cloth and gently clean.
Check the lens manual focal and zoom adjustment. Field test monitor is recommended.

FEATURES

1/3” Sony Super HAD II CCD

High Resolution 560 TV Lines

2.8~11mm Varifocal Auto Iris Lens

Electronic Day and Night

Star-Light (Super Low Light Technology)

DRC (Dynamic Range Compressor)

Dark spots in images particularly become more visible without overexposing the bright spots to create one perfect image.

3D-DNR (3D Digital Noise Reduction)

Produces less noise and more color during low-light application.

HME (Highlight Mask Exposure)

Masks overly exposed light to produce a true video image of any environment.

BLC (Back Light Compensation)

Programmable Privacy Zone (6) & Motion Detection

Easy Icon Driven OSD Menu with Built-In Joystick

Auto Sensing 12VDC or 24VAC with Line Lock

No Fog or Condensation under Any Weather Condition

DIMENSION (mm) & POWER REQUIREMENT

POWER REQUIREMENT:

12VDC @1A
24VAC @ .500mA

Power Wire Maximum Distance

Wire Gauge 12VDC 24VAC

24 AWG 80ft 323ft
22 AWG 128ft 513ft
20 AWG 203ft 815ft
18 AWG 323ft 1295ft
16 AWG 514ft 2056ft
14 AWG 816ft 3264ft
12 AWG 1295ft 5183ft
10 AWG 2057ft 8228ft

COAXIAL CABLE TYPE
MAXIMUM DISTANCE

RG59/ U 750feet
RG6/U 1,000feet
RG11/U 1,500feet

INSTALLATION AND ADJUSTMENT

INSIDE THE BOX

1. Digital Watchdog Ball Dome Camera

2. Zoom & Focus Adjustment Tool

3. Four (4) Wood Screws

4. One Security L-Key

5. Security Lock Screw

6. Zoom & Focus Seal Covers

7. Quick Connect & Disconnect Power
Connector

8. User Manual

9. Secondary BNC Cable for a Field Monitor

INSTALLATION

OSD CONTROL

EXPOSURE

LENS DC (0~100) / MANUAL / VIDEO. (DC Lens is recommended.)

SHUTTER 1/160 /1/100 / FLC / 1/250 ~ 10000 / SENS-UP x2 ~ x250

BLC

AGC

MAX-DR OFF / ON (0 ~ 20) (Electronic Wide Dynamic Range)

STAR-LIGHT AUTO (x2 ~ x250) / OFF (x32 is recommended.)

EXIT JUMP EXIT / SAVE&EXIT / FACTORY RESET

OFF / ON
BLC (Back Light Compensation)

HIGH / MIDDLE / LOW / OFF
AGC (Auto Gain Control)

COLOR

WB MODE AWC / ATW / MANUAL / PUSH LOCK

R-Y GAIN 0 ~ 100

B-Y GAIN 0 ~ 100

DAY & NIGHT

AUTO / COLOR / BW / EX-CONT

Day & Night Mode

COLOR ----BW : Switching from color to BW; if the number is higher, the camera will only switch during a super low light condition.
BW ----COLOR : Switching from BW to color; this number should always be lower than COLOR to BW
Read Time: Time interval to switch from Color to Black-and-White

COLOR

B&W: (BURST:OFF/ON) When the burst is OFF will make less noise

C-SUP

A-SUP

EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET

Color Suppression :Color will be reduced at low illumination, if the C-SUP Level is higher.

0 ~ 100 (Not Available when DNR is On.)

Aperture Suppression: The sharpness of the edges will be reduced at low illumination, if A-SUP Level is higher.
0 ~ 100 (Not Available when DNR is On.)

MIRROR OFF / MIRROR / V-FLIP / ROTATE

SHARPNESS 0 ~ 31

GAMMA 0.05 ~ 1.00 / USER

FREEZE OFF / ON

NEGATIVE OFF/ ON

FUNCTION

3D-DNR

D-ZOOM OFF / ON (x1.0 ~ x32 PTZ)

SLC

HME

DIS

EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET

OFF / LOW / MIDDLE / HIGH
3D-DNR (3D Digital Noise Reduction)

OFF / ON
SLC (Side Light Compensation)

OFF / ON

HME (Highlight Masking Exposure)

OFF / ON
DIS (Digital Image Stabilizer)

(OMNI-Focus Lens Only)

MOTION OFF / ON

SET WINDOW

ALL SET (Set the Entire Screen)

ALL CLEAR (Clear the Entire Screen)

SENSITIVITY (1 ~ 120)

MOTION

SHOW INDICATOR (OFF / ICON / TRACE)

DELAY OUT (1 ~ 15)
Motion Alarm Zoom-In Delay

EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET

MASK 1 OFF / ON

MASK 2 OFF / ON

MASK 3 OFF / ON

MASK 4 OFF / ON

MASK 5 OFF / ON

MASK 6 OFF / ON

EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET

CAMERA ID 0 ~ 255

TITLE OFF / ON

PRIVACY

SETUP

DPC

MONITOR CRT / LCD

LANGUAGE English, Japanese, Chinese

BAUDRATE

OMNI LENS OFF / 1 ~ 10 (for OMNI-PLUS CAMERA only)

EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET

OFF / AUTO
DPC (Dead Pixels Cancellation)

2400 / 4800 / 9600 / 14400 / 19200 / 38400.

Protocol is Pelco-D (fixed cannot be changed; hardcoded into the DSP)

SYNC INTERNAL / AUTO

V-PHASE 0 ~ 199

EXIT JUMP EXIT / SAVE & EXIT / FACTORY SET

EXIT Exit the menu

SYNC

EXIT

SAVE&EXIT Exit the menu and save the setting

FACTORY SET Reset the menu setting to factory default

SPECIFICATIONS:

Camera TYPE Color / BW BL5363D

Mount 3 Axis Ball

Image Device Super HAD II CCD

Size 1/3"

Pixels-Total 811(H) x 508 (V)

Pixels-Effective 768(H) x 494 (V)

Scanning System 525 line, 2:1Interlace

Horizontal Freque ncy Internal Mode 15,734Hz

Vertical Freq uency Internal Mode 59.94Hz

Min. Scene Illumination

Functions BLC ON / OFF

Lens Focal Length 2.8~11mm Varifocal Auto Iris Lens

F1.2

x256 Star-Light

AGC HIGH / MIDDLE / LOW /OFF

DRC OFF / INDOOR / OUTDOOR

Mirror OFF / MIRROR / V-FLIP / ROTATE

STAR-LIGHT AUTO (x2 ~ x250) / OFF

3D-DNR OFF / ON (0~100)

HME OFF / ON

Privacy Zone 6 Programmable Zone / Size

0.0005 Lux in Color

0.14 Lux

5436 W Crenshaw St. Tampa, FL 33634

Tel: [phone]

Fax: [phone]

www.Digital-Watchdog.com

[e-mail]

Technical Support Hours: Monday-Friday

8:30am to 8:00pm Eastern Time

Resolution Horizontal 560 TV Lines [Color]; 580 TV Lines [BW]

Video Output VBS 1.0Vp-p VBS 1.0Vp-p(75 Load)

S/N Ratio S/N Ratio 50dB

OSD OSD YES

Environmental Conditions Operating Temperature -10℃~ +55℃(14℉~ 131℉)

Humidity Less than 90%

Power Power Requirement 12VDC / 24VAC

Power Consumption 1.96 [W] / 2.2 [W]

Physical Specifications Dimensions 96 x 120 mm

Weight 1.6lbs

Nema Type IP66

Certifications FCC, RoHS, CE

Starlight BL5363D
Ball Camera

User Manual Version #1:
Camera without ICON Menu

ABOUT MANUAL

Before installing and using the camera, please read this
manual carefully.
Be sure to keep it handy for future reference.

11192010

CAMERA SETTINGS

SETUP

LENS

SHUTTER

WHITE BALANCE

BACKLIGHT OFF / LOW / MIDDLE / HIGH
AGC NORMAL / HIGH / OFF (When the AGC is Off, DNR is not available.)
DNR LOW / MIDDLE / HIGH / OFF
SENS-UP AUTO x2 ~ x128 / OFF

CAM ER A I D OFF / ON
DAY NIGHT AUTO / BW / EXTERNAL / COLOR
SYNC INTERNAL / LINE
MOTION DETECTION OFF / ON

[DC] - Brightness (DC Lens is recommended.)
Manual. Shutter is available.
FLK (Flicker Free)
ESC (Electronic Shutter Control) - Brightness Adjustment
Manual Adjustment
ATW 1800K ~10500K (ATW is recommended).
Manual Adjustment
AWC (Auto White Balance)

SPECIAL

PRIVACY OFF / ON
MIRROR OFF / ON
SHARPNESS OFF / ON Level Adjustment
RESET
RETURN Return to main setup.

SPECIFICATIONS:

Camera TYPE Color / BW BL5363D

Mount 3 Axis Ball

Image Device Super HAD II CCD

Size 1/3"

Pixels-Total 811(H) x 508 (V)

Pixels-Effective 768(H) x 494 (V)

Scanning System 525 line, 2:1Interlace

Horizontal Freque ncy Internal Mode 15,734Hz

Vertical Freq uency Internal Mode 59.94Hz

Min. Scene Illumination

Functions BLC ON / OFF

Lens Focal Length 2.8~11mm Varifocal Auto Iris Lens

F1.2

x256 Star-Light

AGC HIGH / MIDDLE / LOW /OFF

DRC OFF / INDOOR / OUTDOOR

Mirror OFF / MIRROR / V-FLIP / ROTATE

STAR-LIGHT AUTO (x2 ~ x250) / OFF

3D-DNR OFF / ON (0~100)

HME OFF / ON

Privacy Zone 6 Programmable Zone / Size

0.0005 Lux in Color

0.14 Lux

5436 W Crenshaw St. Tampa, FL 33634

Tel: [phone]

Fax: [phone]

www.Digital-Watchdog.com

[e-mail]

Technical Support Hours: Monday-Friday

8:30am to 8:00pm Eastern Time

Resolution Horizontal 560 TV Lines [Color]; 580 TV Lines [BW]

Video Output VBS 1.0Vp-p VBS 1.0Vp-p(75 Load)

S/N Ratio S/N Ratio 50dB

OSD OSD YES

Environmental Conditions Operating Temperature -10℃~ +55℃(14℉~ 131℉)

Humidity Less than 90%

Power Power Requirement 12VDC / 24VAC

Power Consumption 1.96 [W] / 2.2 [W]

Physical Specifications Dimensions 96 x 120 mm

Weight 1.6lbs

Nema Type IP66

Certifications FCC, RoHS, CE