Digital Watchdog DWC-B6563TIR550, DWC-B6563DIR User Manual
Bullet Camera
DWC-B6563DIR
DWC-B6563TIR550
ABOUT MANUAL
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
12162013
PRECAUTIONS
Do not open or modify.
Do not open the case except during maintenence and installation,
for it may be dangerous and can cause damages.
Do not put objects into the unit.
Keep metal objects and flammable substances from entering the camera.
It can cause fire, short-circuits, or other damages.
Be careful when handling the unit.
To prevent damages, do not drop the camera or subject it to shock or vibration.
Do not install near electric or magnetic fields.
Protect from humidity and dust.
Protect from high temperature.
Be careful when installing near the ceiling of a kitchen or a boiler room,
as the temperature may rise to high levels.
Cleaning:
To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.
Mounting Surface:
The material of the mounting surface must be strong enough to support the camera.
FCC COMPLIANCE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference, when the equipment is operated in a residential environment. This
equipment generates, uses, and radiates radio frequency energy; and if it is not installed and used in
accordance with the instruction manual, it may cause harmful interference to radio communications.
WARNING: Changes or modifications are not expressly approved by the manufacturer.
2
TABLE OF CONTENTS
Table of Contents
Introduction
Installation
Module OSD Menu
Troubleshooting
Warranty Information
Specifications
Features
Parts and Descriptions
Dimensions
Inside the Box
Mount Installation Instructions
Connecting to Monitors
Control Board
Adjusting the Camera Angle
4
5
6-7
8
9
10
11
12
13-24
25
26-27
28-29
3
FEATURES*
960H CCD Image Sensor (960 Horizontal Pixels)
720 TV Lines [B/W], 700 TV Lines [Color]
2.8~12mm Varifocal Auto Iris Lens [DWC-B6563DIR]
5~50mm Long Range Varifocal Auto Iris Lens [DWC-B6563TIR550]
100ft Range IR with Intelligent Camera Sync, Smart IR [DWC-B6563DIR]
150ft Range IR with Intelligent Camera Sync, Smart IR [DWC-B6563TIR550]
Electronic Day & Night [DWC-B6563DIR]
TDN (True Day & Night) [DWC-B6563TIR550]
3D DNR (3D Digital Noise Reduction)
Star-Light (Super Low Light Technology)
HME (Highlight Masking Exposure)
SLC (Side-Light Compensation)
Programmable Privacy Zones (8) & Motion Detection
AGC / BLC / AWB
Easy Icon Driven OSD Menu with Built-in Joystick
IP66 Certified (Weatherproof)
Auto Sensing 24VAC/12VDC with Line Lock
Secondary Video-BNC Output
4
PARTS & DESCRIPTION*
3
4
5
6
1
1
Mounting Bracket
2
Camera Module
3
Sunshield Adjusting Screws
4
Sunshiled Cover
5
IR Module
6
Front Case
7
OSD Joystick Controller
2
Set Screw
7
5
DIMENSIONS IN MILLIMETERS (IN)*
DWC-B6563DIR
234.5 9.23
61.5 2.42
6
73.7 2.90
96.7 3.81
112.0 4.41 94.0 3.70
4.2 0.17
78.0 3.07
DIMENSIONS IN MILLIMETERS (IN)*
DWC-B6563TIR550
252 9.92
73.7 2.90
96.7 3.81
158.5 6.24 93.5 3.68
4.2 0.17
78.0 3.07
7
INSIDE THE BOX*
Included with Bullet Camera:
1
User Manual
2
Mounting T emplate
3
4 Machine Screws and 4 Dry Wall Anchors
Bullet Camera
DWC-B6563DIR
ABOUT MANUAL
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
8
07232013
4
Secondary Video-BNC Cable
5
L-Key
INSTALLATION INSTRUCTIONS*
1. Using the mounting template or your own camera,
mark and drill the necessary holes to mount the
bracket to a wall or ceiling.
2. Pull all necessary wires through and make the
proper connections.
3. Use the four (4) mounting screws to install
the camera on the wall or ceiling.
NPT 3/4” Pipe
*Installation Using a Junction Box
*Note: Electrical junction box and
required screws sold separately.
9
CONNECTING TO MONITORS*
Use the diagram below to connect to a Monitor or CRT Monitor properly.
12VDC/24VAC
Left
Second Video Output
Monitor
Power Connection - 12VDC/24VAC Dual Voltage (Auto Polarity Detection and Protection)
All cameras are equipped with a second video output for on-site configuration.
10
CCTV Monitor
Up
Right
Down
Loading...