Digital View Video Flyer VF-064M, Video Flyer 7.9 User Manual

Video Flyer 6.4” User Manual

(Model: VF-064M)

1 Introduction

The VideoFlyer is a self-contained digital video viewing monitor for looping video display with a
touchscreen (option) video. The unit comprises of a 6.4” colour TFT LCD panel with speaker built­in. The video can be stored and played back from a plug-in and play CompactFlash Card.

IMPORTANT USAGE NOTE

This equipment is for use by developers and integrators, the manufacturer accepts no
liability for damage or injury caused by the use of this product. It is the responsibility of the
developer, integrators or other user of this product to:

 Ensure that all necessary and appropriate safety measures are taken.
 Obtain suitable regulatory approvals as may be required.
 Check power settings to all component parts before connection.

DISCLAIMER

There is no implied or expressed warranty regarding this material.

- 1 -

2 System Designs

6.4 inch

7

8

1

2

3

9

4

6

5

Front Side

Summary :

1. Power on/off switch

1. DC 12V input

2. External buttons L1 – L4 (option)

3. CompactFlash card compartment with security lock

4. Speaker (Left)

5. Speaker (Right)

6. Mounting holes (50mm, 75mm)

7. RS-232 (option)

8. Motion sensor (option)

Back Side

- 2 -

3 Touch Screen Operation

Button 8

Power on

Holding the button

Config. Mode menu

VOLUME 14 VER 4. 01

Y M D H M S
2004 .10 .12 15 : 48 : 44

ID NO: 0712

DATA LOGGING: ON
OSD: ON

SAVE AND EXIT

(only applicable in touch screen option)

1. Touchscreen touch segments

The VideoFlyer’s button control can be performed via touchscreen for panel sizes of

6.4” (Fig. 1)

Fig.1 8-buttons for LCD screen sizes 6.4”

Button function settings

Each button function can be programmed with the DV Studio Advanced software

program to perform a VCD player mode function or specific track select function. (See
DV Studio Advanced User Guide).

The DV Studio Advanced software program is separately provided.

2. Config. Mode (For master volume control)

To enter the Config. Mode, holding the button 8 (or L1) and power up.

The volume setting can be adjusted when the config. mode is enabled.

Press button 8 (or L1) + power up : Config. mode enable.
Press button 8 (or L1) : Select
Press button 7 (or L2) : Increase / Save and Exit
Press button 6 (or L3) : Decrease / Save and Exit

- 3 -