digitalview Video Flyer 7” VF-070M User Manual

- 1 -

Video Flyer 7” User Guide V1.0

(Model: VF-070M)

1

Introduction

The 7” VideoFlyer is a self-contained digital video viewing monitor for looping video display with a
touchscreen (option) video. The unit comprises of a 7” colour TFT LCD panel with speaker built-in
(Enclosed version). The video can be stored and played back from a plug-in and play
CompactFlash Card.

IMPORTANT USAGE NOTE

This equipment is for use by developers and integrators, the manufacturer accepts no
liability for damage or injury caused by the use of this product. It is the responsibility of
the developer, integrators or other user of this product to:

• Ensure that all necessary and appropriate safety measures are taken.

• Obtain suitable regulatory approvals as may be required.

• Check power settings to all component parts before connection.

DISCLAIMER

There is no implied or expressed warranty regarding this material.

- 2 -

2 System Designs

7” VideoFlyer (VF-070M)

7” VideoFlyer (VF-070M-OF)

CF Card slot
Remote Ext.

Power / Status LED
USB

On/Off switch

Speaker

Power in (DC 12V)

L1 (Button 8) + power up - Config mode
L1 (Button 8) - Select
L2 (Button 7) - + / Save and exit
L3 (Button 6) - - / Save and exit

Speaker

COM port

CF Card socket

Power / Status LED

USB connector

PAL <-> NTSC
Power in (DC 12V)
Audio Right

Remote Ext.

S-Video out
Composite out
Audio Left

- 3 -

3

Touch Screen Operation

(only applicable in touch screen option)

1. Touchscreen touch segments

The VideoFlyer’s button control can be performed via touchscreen for panel sizes of
7” (Fig. 1)

Fig.1 8-buttons for LCD screen sizes 7”

Button function settings
Each button function can be programmed with the DV Studio software to perform a VCD

player mode function or specific track select function.
The DV Studio software is separately provided.

2. Config. Mode

To enter the Config. Mode, holding the button 8 and power up.

The volume setting can be adjusted when the config. mode is enabled.
Press button 8 + power up : Config. mode enable.

Press button 8 : Select
Press button 7 : Increase / Save and Exit
Press button 6 : Decrease / Save and Exit

    



       !#"$&%(' )

*+

"-,.#/0.$1

VOLUME 14 VER 4.01

Y M D H M S
2004 .10 .12 15 : 48 : 44

ID NO: 0712
DATA LOGGING: ON

OSD: ON
SAVE AND EXIT

Button 1

Button 2

Button 7

Button 4

Button 3

Button 5

Button 6

Button 8