Digital View VF-100W, VF-100W-OF User Manual

VIDEO FLYER 10”

(VF-100W, VF-100W-OF)

USER GUIDE

Version 2.1

Page 2 of 14

Revision History

Amendment Date

Version

May 2008

V1.0

Dec, 2009

V2.0

Feb, 2010

V2.1

Page 3 of 14

Table of Contents

1 Introduction ................................................................................ 4

2 System ...................................................................................... 5

3 Instructions ................................................................................ 6

3.1 Preparation ......................................................................... 6

3.2 Compact Flash ..................................................................... 6

3.3 Powering On ....................................................................... 7

3.4 Autoplay / Manual Playback at power startup ........................... 7

3.5 Playback modes ................................................................... 7

3.6 Configuration mode .............................................................. 8

4 Touch Screen Operation ............................................................... 9

4.1 Touch segments .................................................................. 9

4.2 Configuration mode .............................................................. 9

5 Dimensions ................................................................................ 10

6 Specification .............................................................................. 12

Page 4 of 14

1 Introduction

The Digital View 10” VideoFlyer is a self-contained LCD display and digital media
player for continuous (looped) play of video stored on a CF (Compact Flash)
memory card. The unit comprises a widescreen 10” color TFT LCD, a built in
speaker and optional touch screen. A range of other accessories and factory
installed customization options are also available, these are not be covered in this
manual.

Please note that a certain level technical knowledge and experience is assumed, if
you have difficulties please contact your sales representative or Digital View
support, contact details are available on www.digitalview.com/dv_contactus.php.

IMPORTANT USAGE NOTE

This equipment is for use by system developers and integrators. The
manufacturer accepts no liability for damage or injury caused by the use of this
product. It is the responsibility of the developer, integrators or other users of this
product to:

 Ensure that all necessary and appropriate safety measures are taken.
 Obtain suitable regulatory approvals as may be required.
 Check power settings to all component parts before connection.

DISCLAIMER

There is no implied or expressed warranty regarding this material.

Page 5 of 14

2 System

10” VideoFlyer (VF-100W)

A robust metal housing with powder coating:

CF Card compartment

USB port

RS-232 port

L1 (Button 8) + power up - Config menu
L1 (Button 8) - Select

L2 (Button 7) - + / Save and exit

L3 (Button 6) - - / Save and exit

Reserved (480p/720p)

Remote Ext.
(#1 - #8)

Power LED

On/Off switch

Stereo phone
jack

IR sensorVolume Control

Power in

(DC 12V)

10” VideoFlyer (VF-100W-OF)

Aluminum frame with mounting holes for mounting:

CF Card socket

USB connector

Power/Status LED
connectors

IR sensor
Botton/Touch

connector
(#1 - #8)

Botton/Touch
connector (#9 - #16)

RS-232 port
(for M3)

Serial port
(for controller)

OSD Control connector

Default set to “Auto Power on”

Pin1 & Pin 2: Close (Power on)
Pin1 & Pin 2: Open (Power off)

Speaker
out (L/R)