VIDEO FLYER 21.5”
(VF-215WHD, VF-215WHD-OF)
Manual
Version 1.1
Table of Contents
1 Introduction ....................................................................................4
2 System ...........................................................................................5
3 Instructions.....................................................................................6
3.1 Preparation .............................................................................6
3.2 Compact Flash ........................................................................6
3.3 Powering On ...........................................................................7
3.4 Autoplay / Manual Playback at power startup .............................7
3.5 Playback modes ......................................................................7
3.6 Configuration mode .................................................................8
4 Touch Screen Operation ...................................................................9
4.1 Touch segments ......................................................................9
4.2 Configuration mode ...............................................................10
5 Dimensions ...................................................................................11
6 Specification .................................................................................13
1 Introduction
The Digital View 21.5” HD VideoFlyer is a self-contained LCD display and network
digital media player for continuous (looped) play of HD 1080p video stored on a
CF (Compact Flash) memory card. The unit comprises a widescreen 21.5” color
TFT LCD, a built in speaker and optional touch screen. A range of other
accessories and factory installed customization options are also available, these
are not be covered in this manual.
Please note that a certain level technical knowledge and experience is assumed, if
you have difficulties please contact your sales representative or Digital View
support, contact details are available on http://www.digitalview.com/contact-us
IMPORTANT USAGE NOTE
This equipment is for use by system developers and integrators. The
manufacturer accepts no liability for damage or injury caused by the use of this
product. It is the responsibility of the developer, integrators or other users of this
product to:
• Ensure that all necessary and appropriate safety measures are taken.
• Obtain suitable regulatory approvals as may be required.
• Check power settings to all component parts before connection.
DISCLAIMER
There is no implied or expressed warranty regarding this material.
2 System
21.5” HD VideoFlyer (VF-215WHD)
A robust metal housing with powder coating:
Remote Ext. (#1 - #8)
Power LED
CF Card compartment
USB port
Speaker (L)
Speaker (R)
On/O ff switch
LAN
IR sensor
Line out
(Stereo phone jack)
L1 (Button 8) + power up - Config menu
L1 (Button 8) - Select
L2 (Button 7) - + / Save and exit
L3 (Button 6) - - / Save and exit
1. COM port
2. Coaxial (option)
Volume Control
8x
M4-Thread holes
VES A 75
M4
Power: DC 12V
VES A 100
100
75
21.5” HD Openframe (VF-215WHD-OF)
Aluminum frame with mounting holes for mounting:
CF Card socket
USB connector
Power/Status LED connectors
IR sensor
Botton/ Touch connector (#9 - #16)
Botton/ Touch connector (#1 - #8)
RS-232 port
Speaker out
Auto Power On
Default set to “Auto Power on”
Pin1 & Pin 2: Close (Power on)
Pin1 & Pin 2: Open (Power o ff)
On/o ff SwitchRJ-45
L1 (Button 8) + power up - Config menu
L1 (Button 8) - Select
L2 (Button 7) - + / Save and exit
L3 (Button 6) - - / Exit without save