Page 1
PERFORMANCE SPECIFICATIONS
Brightness (±10%)
SX+ 330 L & P: 6,000 ANSI Lumens
SX+ 700: 11,000 ANSI Lumens
Mechanical Orientation
• “P” models support portrait and 360˚ of
roll
• “L” models support 360˚ of pitch (lens up/
down)
Contrast Ratio (±10%)
2000:1
Display Type
3 x Dark Chip DMD™ with
Fast Transit Pixels for smooth greyscale
and improved contrast
DMD Specification
1400 x 1050 pixels native, 12˚ tilt angle
Fill Factor
90%
Sealed Optics at DMD™ Interface
Protects DMD’s™ from optical contamination
Source Compatibility
• Composite, s-video, and color difference
video standards up to 1080i
• RGB graphics standards up to 1920 x
1080
• DVI standards
• High definition RGB and color difference
standards
• High definition / standard definition serial
digital formats (SD/HD-SDI)
Video Processing
• Enhanced 7 point color correction
• Xenon Color Mode - User selectable notch
filter and xenon-color mode
processing, enable the projector to closely
replicate xenon lamp spectral performance.
• Class leading Video de-interlacing/processing
of SD and HD sources using auto 3:2 and
2:2 extraction, ruggedized for editing
discontinuities
• Pixel-based motion adaptive interpolation
• User selectable preset, parametric
de-gamma and user downloadable
de-gamma
• Frame Delay: as low as 1 frame, source
dependant
• Auto mode selection - plug and play setup
Specifications subject to change without notice DP V5 4/11 ©2011 Digital Projection, Inc.
™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.
Network Connection
LAN via RJ 45, Wireless 802.11b,
full protocol feature set
Lamp Type
SX+ 330 L & P: Single High Intensity
module (330W lamps)
SX+ 700: Dual HID modules (2 x 350W)
Lamp Life
SX+ 330 L & P: 2000 hours
(typical)
SX+ 700: 2000 hours / 4000 hours
Lens Mount
Zoom: Motorized horizontal and vertical
lens shift, zoom and focus.
Fixed: Manual Focus.
Lens Shift (maximum)
Zoom Lenses & 1.2:1 Fixed:
Vert: +0.5, -0.4 frame
Hor: ±0.2 frame
0.73 Fixed lens:
Vert: ±0.11 frame; Hor: ±0.07 frame
Lens Options
0.73 :1 fixed
1.2 :1 fixed (1.2-2.0m throw)
1.2 :1 fixed (3-15m throw)
1.26-1.61 :1 zoom
1.5-2.02 :1 zoom
2.02-2.77 :1 zoom
2.77-4.51 :1 zoom
4.51-7.53 :1 zoom
• 1.2:1 Lenses include manual aperture
• High-contrast lenses available for 0.73:1
and all zoom lenses
Mechanical Mounting
• Front or rear table; Front or rear ceiling
(ceiling mount optional)
• Rugged, staging tolerant chassis with
integrated handles
• Optional rigging / stacking frame with
integrated pitch, roll and yaw adjustments
Weight (chassis only)
SX+ 330: 68 lbs (31kg
SX+ 700: 68 lbs (31kg)
Discharge
1
TITAN Pro Series II
TITAN SX+ 330-L • TITAN SX+ 330-P • TITAN SX+ 700
Overview
Digital Projection International (DPI), Texas Instruments’
first DLP™ partner and the original innovator of the 3-chip
DLP™ projector, proudly introduces the newest and
smallest of our Pro Series II displays, the TITAN sx+ 330L, sx+ 330- P and sx+ 700.
Weighing in at just 68 lbs., the twin-lamp TITAN sx+
330 and dual lamp sx+ 700 employ the latest in Texas
Instruments’ SXGA+ dark chip, 3-chip DLP™ technology
to deliver up to 11,000 ANSI lumens and 2000:1 contrast.
Compact, robustly built and ultra-quiet for their performance class, the TITANs are unmatched solutions for
staging, command and control, visualization, business,
and educational venues. For staging, the TITAN can be
ordered with DP’s RapidRig flying and stacking frame,
which provides integrated pitch, roll and yaw adjustments, simplifying installation and alignment accuracy.
Other key benefits of the TITAN sx+ series include:
• DP’s NextGen electronics, featuring class leading de-interlacing
with SD and HD sources processed using auto 3:2 and 2:2
extraction
• Minimal video delay from input to screen - as low as 1 frame,
depending on source
• Sealed optics to protect DMD’s and other focal plane compo-
nents from airborne contaminants
• Seven user-selectable inputs, including HDCP compliant DVI and
SD/HD-SDI
• ColorMax™ calibration capabilities including enhanced seven-
point color correction for broader color space and accurate color
alignment
• User selectable Xenon-color mode processing, which enables
the projector to closely replicate the spectral performance of a
Xenon lamp
• Twin (sx+ 500) or Dual (sx+ 600M and sx+ 700) high intensity
discharge lamps, which can be run individually or simultaneously,
with a typical life of up to 2000 hours per lamp
• A range of precision optics with extended lens shift, compatible
with all TITAN and LIGHTNING sx+ and 1080p models
• DP’s CoolTek™ engineering, which delivers the highest lumen
performance with the lowest thermal (BTU) and noise level (dB)
output.
• Intelligent Lens Mount (ILM) - provides the ability for the user to
program up to 10 distinct presets for lens zoom, focus and shift.
The ILM presets can be assigned and automatically recalled, by
source and input.
The TITAN sx+ 330 and sx+ 700 Pro-series II displays
are priced and sized for every venue and everyday use bringing the precision of Digital Projection to your venue.
INPUT CAPABILITIES
Type
Composite
S-Video
Component
Interlaced/Std def Y, Cr/Pr, Cb/Pb, S
Graphics
Progressive RGB/Progressive Interlaced
Hi def Y, Cr/Pr, Cb/PB
RGBHV (Progressive)
Digital RGB
Serial Digital
SD/HD-SDI (SMPTE 259M/292M)
Connector
BNC
4-pin mini DIN
BNCx4
BNCx5
D sub (15-pin)
DVI
BNC
Quantity
1
1
1
1
1
1
1
Page 2
TITAN Pro Series II
TM
CORE TECHNOLOGY
Projector Dimensions
330-L, 330-P, 700 Series
Projector dimensions (in)
L1 25.4 W1 21.4 H1 10
Projector dimensions (mm)
L1 645.4 W1 543.5 H1 253.5
TITAN SX+ 700 side panel
ADVANCED TECHNICAL SPECIFICATIONS
PARAMETERS
Native Color Temperature
HDTV Formats Supported
Scan Rates Supported
Remote Control
1080i (50Hz, 60Hz), 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080 24sf, 720p (50, 60Hz), 480i, 480p
Addressable IR remote control, wireless and wired with loop-through / On board invertable keypad
Automation Control
Operating/Storage Temperature
Operating Humidity
Thermal Dissipation
1,981 BTU/hr 3,244 BTU/hr
Fan Noise
Power Requirements
Power Consumption
580 watts maximum 950 watts maximum
Projectors Part #
TITAN SX+ 330-L 111-232
TITAN SX+ 330-P 111-230
TITAN SX+ 700 108-770
Lenses HB Part #
0.73:1 105-607
1.2:1 105-608
1.2:1 (short) 105-609
1.5 - 2.02:1 105-610
2.02 - 2.77:1 105-611
2.77 - 4.51:1 105-612
4.51 - 7.53:1 105-613
User selectable Xenon-like colorimetry using dynamic optical and electronic enhancement.
6500°K ±1000°K; white balance-adjustment: 3000°K to 10000°K
Horizontal: 15kHz to 100kHz / Vertical: 24Hz to 85Hz
Less than 42dBA {400} Less than 45dBA {500}
Accessories Part #
330 Watt Lamp & Housing* (2 required - 600M Series) 109-319
350 Watt Lamp & Housing* (2 required - 700 Series) 108-772
RapidRig
TITAN 500 Series Adjustable Ceiling Mount 105-021
TITAN 700 Series Adjustable Ceiling Mount 108-499
Infrared Remote (Replacement) 105-023
* Includes high-performance replacement air filter
shown with optional rigging frame
LAN connection via RJ45 / RS232 9-pin D type
Operating: 0 to 40°C / Storage: -10 to 50°C /
20 to 80% non-condensing
100-240 VAC ±10%, 50/60Hz single phase
TM
Frame 107-956
1 Based on 4-6 hour/day operational profile. Venue and application conditions may impact actual lamp life.
See Digital Projection’s Product Warranty Statement for details on lamp warranty.
Installations requiring horizontal or vertical tilt orientations greater than 15 degrees may reduce the
actual operational hours of one of the two lamps.
DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.com
DIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.uk
DIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770
DIGITAL PROJECTION, ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238
Loading...