Digital Projection TITAN Ref 1080p 3D Product Sheet

REFERENCE 3D Displays

PERFORMANCE SPECIFICATIONS

Brightness (±10%)

4,000 - 6,000 ANSI Lumens (depending on lens selected)

Contrast Ratio (±10%)

5000:1

Display Type

3 x .95” Dark Chip-4 1080p DMD™ with Fast Transit Pixels for smooth greyscale and improved contrast

DMD Specification

1920 x 1080 pixels native, 12˚ tilt angle

Fill Factor

87%

Sealed Optics at DMD™ Interface

Protects DMD’s™ from optical contamination

Source Compatibility

• Composite, s-video, and color difference

video standards

• RGB graphics standards up to 1920 x 1080

• DVI standards with HDCP compliance

• High definition RGB and color difference

standards

• High definition / standard definition serial

digital formats (SD/HD-SDI)

• High bandwidth - Dual DVI, and Dual-Twin DVI

Video Processing

• Enhanced 7 point color correction

• Dual Flash Processing™ increases 60 Hz inputs to

120 Hz displayed output

• FastFrame™ Motion Blur Reduction

• Xenon Color Mode - User selectable notch filter and

xenon-color mode processing, enable the projector to replicate xenon lamp spectral performance

• Class leading Video de-interlacing/processing of SD

and HD sources using auto 3:2 and 2:2 extraction,

ruggedized for editing discontinuities

• Pixel-based motion adaptive interpolation

• User selectable preset, parametric

de-gamma and user downloadable de-gamma

• Frame Delay: as low as 1 frame, source dependant

• Auto mode selection - plug and play setup

High Bandwidth Input

• 3D capable

• Pixel Mapped - with low latency

• FastFrame™ Motion Blur Reduction

• 120 Hz with no frame doubling

™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.

3D Sync

Sync In - External lock

Sync Out - Shutter glass control

Network Connection

LAN via RJ 45, Wireless 802.11b, full protocol feature set

Lamp Type

Dual High Intensity Discharge modules (2 x 350W)

Lamp Life (typical)

4000 hours sequential lamp operation, lamp low provides extended lamp life

Lens Mount

Zoom Lenses: Motorized horizontal and vertical lens shift, zoom and focus Fixed Lenses: Manual focus

Lens Shift (maximum)

Fixed 1.12 and Zoom Lenses:

• Vert: +0.7, -0.5 frame; Hor: ±0.1875 frame

0.67 Fixed lens:

• Vert: ±0.1 frame; Hor: ±0.1 frame

Lens Options

0.67 :1 fixed 1.87-2.56 :1 zoom

1.12 :1 fixed 2.56-4.16 :1 zoom

1.16- 1.49 :1 zoom 4.16-6.96 :1 zoom

1.39-1.87 :1 zoom 6.16-10.49 :1 zoom

• 1.12:1 Lenses include manual aperture

• High-contrast lenses available for 0.67:1

and all zoom lenses

Mechanical Mounting

• Front or rear table; Front or rear ceiling

(ceiling mount optional)

• Rugged, staging tolerant chassis with

integrated handles

• Optional RapidRig™ frame with integrated

pitch, roll and yaw adjustments

Weight (chassis only)

68 lbs (31kg)

TITAN Reference 1080p 3D

Overview

Digital Projection International (DPI), Texas Instruments’ first DLP™ partner and the original innovator of the 3-chip DLP™ projector, proudly introduces the newest entry in our line of Active-3D capable home entertainment Reference Displays, the TITAN Reference 1080p 3D. Weighing in at just 31kgs/68 lbs., the dual lamp TITAN Reference 1080p 3D employs the latest in Texas Instruments’ Darkchip 1080p DLP™ technology to deliver up to 6000 ANSI lumens of razor sharp imagery through an amazingly rich 5000:1 contrast ratio.

The TITAN Reference 1080p 3D relies on key technological innovations such as DPI’s Active-3D sideboard. The sideboard contains a “direct to DMD” high bandwidth input, which introduces less than one frame of latency. All 3-chip 3D units also include DPI’s FastFrame™ technology, a revolutionary combination of hardware and firmware that provides user adjustments to vastly reduce the artifacts and image blur typically associated with rapidly moving display content. This is especially important when viewing sporting events or any other fast-moving entertainment content. Dual Flash Processing, an additional benefit to DPI’s 3D displays, supports the display of 60 Hz sources at frame rates up to 120 Hz.

TITAN 3D models utilize the same lenses employed across the rest of DPI’s TITAN and LIGHTNING product range, so optical accuracy is always ensured. Additionally, the Reference 1080p 3D includes DP’s exceptional ColorMax™ and Xenon Color Mode calibration systems, ensuring deeply saturated, color-accurate imagery which is simultaneously true to life and powerfully immersive. Compact, robustly built and ultra-quiet for its performance class, the TITAN Reference 1080p 3D is an unmatched solution for elite home cinemas and family media rooms.

Key benefits of the TITAN Reference 1080p 3D models include:

• High Bandwidth input >120Hz active stereoscopic DVI with no need for frame

doubling. This capability extends the dynamic range up to 16 bit for improved contrast and color gamut.

• Dual Flash Processing™ (DFP) – Enables distribution of 3D content via 60 Hz formats

by providing the option to frame-double the signal within the projector. When this option is selected, the input signal, having been processed and re-sized to map to the native resolution of the projector, will also be frame-doubled to 120 Hz, and the doubled frames interleaved. This produces imagery with the low flicker characteristics of a native 120 Hz source, but without the infrastructure costs associated with distributing and switching ultra-high bandwidth signals.

• Projector electronics which provide an interface to drive an infrared transmitter to

synchronize switching glasses with active displayed frames. The user can elect either to pass through an external sync pulse, or to use the reference generated internally by the projector. Adjustments are provided to accommodate the phase and dead time characteristics of different switching glasses.

• FastFrame™ technology, a revolutionary combination of hardware and firmware that

provides user adjustments to vastly reduce the artifacts and image blur typically associated with rapidly moving display content.

• Minimal video delay from input to screen - as low as 1 frame.

• Eight user-selectable inputs, including HDCP-compliant DVI plus SD/HD-SDI.

• High bandwidth DVI inputs offer Single, Twin, Dual & Dual Twin DVI connectivity.

• Up to 16 Bit color for breathtaking image reproduction.

• DPI’s ColorMax™ calibration capabilities including enhanced seven-point color

correction for broader color space and precise color alignment.

• DPI’s CoolTek™ engineering, delivers the highest lumen performance with the lowest power consumption, thermal (BTU) and noise level (dBA) output.

As Hollywood focuses its production efforts on creating a wide array of new 3D content, Digital Projection International is pioneering the technological advances needed to deliver it to discerning home cinema enthusiasts worldwide. The TITAN Reference 1080p 3D represents DPI’s dedication to that goal.

INPUT CAPABILITIES

Type

Composite

S-Video

Component Interlaced/Std def Y, Cr/Pr, Cb/Pb, S

Graphics

Progressive RGB/Progressive Interlaced Hi def Y, Cr/Pr, Cb/PB

RGBHV (Progressive)

Digital RGB

Serial Digital

SD/HD-SDI (SMPTE 259M/292M)

DVI - High bandwidth

Dual - main Dual - sub

Connector

BNC

4-pin mini DIN

BNCx4

BNCx5

D sub (15-pin)

DVI

BNC

DVI DVI

Quantity

1 1

TITAN Reference 1080 3D

498.5

19.6

543.5

21.4

216.9

8.5

146.9

5.8

619.5

24.4

581.4

22.9

45.0

1.8

645.4

25.4

253.5

10.0

220.1

8.7

33.4

1.3

CORE TECHNOLOGY

Projector Dimensions

Projector dimensions (in) L1 25.4 W1 21.4 H1 10

Projector dimensions (mm) L1 645.4 W1 543.5 H1 253.5

ADVANCED TECHNICAL SPECIFICATIONS

PARAMETERS

TITAN 1080p-3D side panel

Native Color Temperature

HDTV Formats Supported

Scan Rates Supported

Remote Control

1080i (50Hz, 60Hz), 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080 24sf, 720p (50, 60Hz), 480i, 480p

Inputs 1-7: Horizontal: 15kHz to 100kHz / Vertical: 24Hz to 85Hz - Input 8: 3D progressive 576p up to 1080p @ 120Hz

Automation Control

Operating/Storage Temperature

Operating Humidity

Thermal Dissipation

Fan Noise

Power Requirements

Power Consumption

Projectors Part #

TITAN Reference 1080p 3D 109-324

Lenses HB Part #

0.67:1 105-607

1.12:1 105-608

1.12:1 (short) 105-609

1.16-1.49:1 109-236

1.39 - 1.87:1 105-610

1.87 - 2.56:1 105-611

2.56 - 4.16:1 105-612

4.16 - 6.96:1 105-613

6.92-10.36:1 109-235

User selectable Xenon-like colorimetry using dynamic optical and electronic enhancement.

6500°K ±1000°K; white balance-adjustment: 3000°K to 10000°K

Addressable IR remote control, wireless and wired with loop-through / On board invertable keypad

LAN connection via RJ45 / RS232 9-pin D type

Operating: 0 to 40°C / Storage: -10 to 50°C

20 to 80% non-condensing

2,777 BTU/hr

Less than 45dBA

100-240 VAC ±10%, 50/60Hz single phase

910 watts maximum

Accessories Part #

350 Watt Lamp & Housing* (2 required) 108-772

RapidRigTM Frame 107-956 TITAN 1080p 3D Series Adjustable Ceiling Mount 108-499 Infrared Remote (Replacement) 105-023

* Includes high-performance replacement air filter(s)

1 Based on 4-6 hour/day operational profile. Venue and application conditions may impact actual lamp life. See Digital Projection’s Product Warranty Statement for details on lamp warranty. Installations requiring horizontal or vertical tilt orientations greater than 15 degrees may reduce the actual operational hours of one of the two lamps.

DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.com

DIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.uk

DIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770

DIGITAL PROJECTION, ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238