Digital Projection Titan Laser 26000 Product Sheet

Specification Sheet
Titan Laser 26000 4K-UHD
25,000 ISO / 22,500 ANSI @ 4K-UHD. 28,000 ISO / 25,000 ANSI @ WUXGA Lumens | Contrast Ratio: 18,000:1 (Dynamic Black) / 2,000:1 Native | Part No:119-840
Colour System: DMD Specification:
Laser Phosphor
Display Type:
3 x 0.96" WUXGA DMD™
Aspect Ratio:
16x9
Fill Factor
N/A as Smooth Picture DMD
Key Features
Video & Graphics Processing
DisplayPort 1.2 2 x HDMI 2.0b HDCP 2.2 HDR processing 2 x HDMI 1.4b HDCP 1.4 for Dual Pipe processing and Frame Sequential 3D Format. Sequential Processing: 3D via single HDMI 1.4b input Dual Pipe Processing: 3D Left and Right eyes via two HDMI1.4b inputs. Syncronisation of active glasses. 3G-SDI with loop-through. DICOM simulation mode. DMX Art-Net
General Features
Constant Brightness control Multi-Projector Brightness control Compatible with selected competitor lenses via lens converter Selectable EDID Custom Start-up Logo
Geometry Correction
4-Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc and Image Rotation Non-linear warp Digital Zoom, Pan and Scan Blanking control for custom input window sizing. Scaling available for fixed aspect ratio screens. Unscaled processing for pixel mapped display
Edge Blending
Blending control available for all sides with width control. Correction for non-active pixels at the edge of the display. Electronic Black Level Compensation.
Picture in Picture
Two sources can be displayed symultaneously using 2D inputs. either picture in picture (PIP) , or side by side (PBP), with the original aspect ratios maintained.
HDBaseT® Interface
Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable Allows projector to be placed up to 100m from source with low cost cabling Supports up to 4K UHD 3840 x 2160@60Hz 4:2:0 or 4K UHD 3840 x 2160@30Hz 4:2:2
Colour Processing
Four colour modes available Powerful seven point colour correction for accurate colour matching with presets. Easy colour temperature selection Manual seven point colour adjustment Traditional lifts and gains
Projector Controller Software
Intuitive user interface for network control Simultaneous control of user-defined groups of projectors At-a-glance monitoring of projector status
Projector Automation
Real-time clock provides daily on/off automation E-mail alerts for system status
Source Compatibility:
2D Graphics standards up to 4K-UHD 3840x2160 resolution at 60Hz via HDMI 2.0, HDBaseT (4:2:0), DisplayPort inputs 3D Graphics standards up to dual-pipe WUXGA 120Hz via HDMI 1.4b inputs 3G-SDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
WUXGA mode
2D sources up to WUXGA 120Hz and 4K-UHD 60Hz can be displayed scaled to fit WUXGA 3D sources up to WUXGA 120Hz can be displayed scaled to fit WUXGA
4K-UHD mode
2D sources up to 4K-UHD will be displayed scaled to fit 4K-UHD
Auto Mode
Sources greater than WUXGA will be displayed scaled to fit 4K-UHD Sources up to WUXGA will be displayed scaled to fit WUXGA
Inputs/Outputs
Video & Computer Type Connector Qty
DisplayPort 1.2 (2D) HDMI 1.4b (3D) HDMI 2.0b (2D) 3G-SDI in (2D) 3G-SDI out HDBaseT/LAN (2D)
3D Formats Supported HDTV Formats Supported
Sequential / 1080p @100Hz Sequential / 1080p @120Hz Sequential / WUXGA @100Hz (RB) Dual-Pipe / 1080p @ 50Hz Dual-Pipe / 1080p @ 60Hz Dual-Pipe / WUXGA @ 50Hz (RB) Dual-Pipe / WUXGA @ 60Hz
Computer Compatibility Bandwidth 2D 4K-UHD upto 60Hz
3D Supported Formats will be displayed within WUXGA
DisplayPort HDMI HDMI BNC BNC RJ45
1 2 2 1 1 1
Communication & Control Type Connector Qty
3D Sync In 3D Sync Out LAN RS-232 Wired Remote 12V Trigger 3D Sync IR Out
1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz) 1080i (50Hz, 60Hz) 720p (50Hz, 60Hz) 2K (24Hz, 25Hz, 30Hz, 50Hz, 60Hz) 4K-UHD (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
498 Mpixels/sec via DisplayPort and HDMI2.0.
BNC BNC RJ45 9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack BNC
1 1 2 1 1 2 1
Loading...
+ 2 hidden pages