Digital Projection Titan 930 1080p 3D, Titan 930 WUXGA 3D Product Sheet

Titan 930 1080p 3D

14,500 ANSI Lumens | Contrast Ratio: 2,000:1 | Part No:113-568

Colour System: DMD Specification:

3-chip DLP®

Display Type:

3 x 0.95" DarkChip™ DMD™

1920 x 1080 pixels native.
Fast transit pixels for smooth greyscale and improved contrast.

Aspect Ratio:

16x9

Fill Factor

87%

Specification Sheet

Key Features

Standard Inputs (1-8): Front End Video Capabilities

Video & Graphics Processing

High bandwidth digital & analog receiver with 10 bit A-D.
Automatic detection of interlaced video and implementation of 3:2 or 2:2 extraction as appropriate, with pixel
based, motion adaptive interpolation and auto cadence correction.
Displayed image frame locked to input with as low as 1 frame total latency.
24p and 1080p native display.
Image enhancement for MPEG, Mosquito noise & color transients in composite sources.

Geometry Correction

Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
Non-linear Warp adjustment by moving points on an interpolated grid.

Edge Blending

Semi-automated multi projector tiling
Correction for non-active pixels at the edge of the display.

Super Image Clarity

Geometry correction and Edge Blending implemented in single stage process, retaining maximum image
resolution.

Picture in Picture

Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios
maintained.

ColorMax™

Accurate matching of projectors in tiled or blended applications.
User selection and storage of primary and secondary color targets.

High Bandwidth Inputs (9-11): Bypassing Front End for Minimal Latency

Pixel mapped to the display.
Dual Link DVI accepts frame rates up to 160Hz with latency as low as 1 frame.
HDMI 1.4 for Side by Side, Frame Packing & Top Bottom formats.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
FastFrame™ Smear Reduction.
Dual Pipe processing: two sources in parallel for left and right eyes.
Synchronisation of active glasses or polarising switcher.

Projector Controller Software

Intuitive user interface for network control
Simultaneous control of user-defined groups of projectors
At-a-glance monitoring of projector status

Source Compatibility:

3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI and DVI include Deep Color™ processing up to 36 bit.
DVI inputs are HDMI compatible.
Digital Audio Extraction via SPDIF for HDMI sources.
Graphics standards up to 1920 x 1200 at 60Hz via DVI or VGA.
Component Video (SD and HD) via YPrPb, RGB or RGBS.
S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM)

High Bandwidth, Pixel Mapped Path:
Dual DVI accepts graphics standards up to 1920 x 1200 at 120Hz.
HDMI 1.4 including 3D Standards
Dual Pipe (2 x DVI)

Inputs/Outputs

Video & Computer
Type Connector Qty

DVI-D / DVI-A
HDMI 1.3
3G-SDI
VGA / Analog RGB
Component Video
S-Video
Composite Video
Composite Video

DVI-I
HDMI
BNC
15-pin D-Sub
4 x BNC
4-pin Mini DIN
RCA
BNC

1
1
1
1
1
1
1
1

Communication & Control
Type Connector Qty

3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Wired Remote Out
Update Port
Service Port

BNC
BNC
RJ45
9-pin D Sub

3.5mm Stereo Jack

3.5mm Stereo Jack
RJ45
USB Type B

1
1
1
1
1
1
1
1

High Bandwidth Ports
Main - Dual Link DVI-D
Sub - HDMI 1.4

Audio
SPDIF Digital Output

DVI-I
DVI-I

RCA

1
1

1