Digital Projection Titan 1080p 3D-L, Titan 1080p 3D-P Product Sheet

1080p 3D-L

1080p 3D-P

1080p 3D-L

Ultra Contrast

1080p 3D-P

Ultra Contrast

TITAN 3D Pro Series II

TITAN 1080p 3D-L • TITAN 1080p 3D-P • TITAN 1080p 3D-L UC • TITAN 1080p 3D-P UC • TITAN 1080p Dual 3D • TITAN 1080p Dual 3D Ultra Contrast

Overview

Digital Projection International (DPI), Texas Instruments’ first DLP™ partner and the original innovator of the 3-chip DLP™ projector, proudly introduces the TITAN 1080p-3D family.

Weighing in at just 31kgs/68 lbs. every TITAN 3D display employs the latest in 1080p dark chip, 3-chip DLP™ technology to deliver up to 10,000 ANSI lumens and up to 5000:1 contrast. This award-winning compact chassis now includes six 1080p active 3D models. All robustly built and extremely quiet, TITAN 3D projectors are the perfect imaging solution for vital immersive applications including: military simulation, scientific visualization, medical and geological research, product engineering, commercial cinema and theme park attractions.

In addition to the active 3D capability, TITAN 3D models also include DP’s new FastFrame™ technology, a revolutionary combination of hardware and firmware that reduces the artifacts and image blur typically associated with rapidly moving displayed content. The benefits of FastFrame™ are especially important for simulation environments such as commercial and military flight training, and other applications where maintaining the visual integrity of high-speed imagery is vital.

PERFORMANCE SPECIFICATIONS

Brightness (±10%)

1080p 3D-L & P: 6,000 ANSI Lumens 1080p 3D-L & P Ultra Contrast: 3,000 ANSI Lumens

1080p Dual 3D: 10,000 ANSI Lumens 1080p Dual 3D Ultra Contrast: 5,000 ANSI Lumens

Mechanical Orientation

• “P” models support portrait and 360˚ of roll

• “L” models support 360˚ of pitch (lens up/down)

Contrast Ratio (±10%)

Standard Models - 2000:1

Ultra Contrast Models - 5000:1

Display Type

3 x .95” Dark Chip 1080p DMD™ with Fast Transit Pixels for smooth greyscale and improved contrast

DMD Specification

1920 x 1080 pixels native, 12˚ tilt angle

Fill Factor

87%

Sealed Optics at DMD™ Interface

Protects DMD’s™ from optical contamination

Source Compatibility

• Composite, s-video, and color difference

video standards

• RGB graphics standards up to 1920 x 1080

• DVI standards with HDCP compliance

• High definition RGB and color difference

standards

• High definition / standard definition serial

digital formats (SD/HD-SDI)

• High bandwidth - Dual DVI, and Dual-Twin DVI

Video Processing

• Enhanced 7 point color correction

• Dual Flash Processing™ increases 60 Hz inputs to 120 Hz displayed output

• FastFrame™ Motion Blur Reduction

• Xenon Color Mode - User selectable notch filter and

xenon-color mode processing, enable the projector to replicate xenon lamp spectral performance

• Class leading Video de-interlacing/processing of SD and HD sources using auto 3:2 and 2:2 extraction,

ruggedized for editing discontinuities

• Pixel-based motion adaptive interpolation

• User selectable preset, parametric

de-gamma and user downloadable de-gamma

• Frame Delay: as low as 1 frame, source dependant

• Auto mode selection - plug and play setup

™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.

High Bandwidth Input

• 3D capable

• Pixel Mapped - with low latency

• FastFrame™ Motion Blur Reduction

• 120 Hz with no frame doubling

3D Sync

Sync In - External lock

Sync Out - Shutter glass control

Network Connection

LAN via RJ 45, Wireless 802.11b,

full protocol feature set

Lamp Type

Single or Dual High Intensity Discharge module

Lamp Life

2000 hours per lamp, dual lamp models

(typical)

provide 4000 hours sequential lamp operation, lamp low provides extended lamp life

Lens Mount

Zoom Lenses: Motorized horizontal and vertical

lens shift, zoom and focus

Fixed Lenses: Manual focus

Lens Shift (maximum)

Fixed 1.12 and Zoom Lenses:

• Vert: +0.7, -0.5 frame; Hor: ±0.1875 frame

0.67 Fixed lens:

• Vert: ±0.1 frame; Hor: ±0.1 frame

Lens Options

0.67 :1 fixed 1.87-2.56 :1 zoom

1.12 :1 fixed 2.56-4.16 :1 zoom

1.16- 1.49 :1 zoom 4.16-6.96 :1 zoom

1.39-1.87 :1 zoom 6.16-10.49 :1 zoom

• 1.12:1 Lenses include manual aperture

• High-contrast lenses available for 0.67:1

and all zoom lenses

Mechanical Mounting

• Front or rear table; Front or rear ceiling

(ceiling mount optional)

• Rugged, staging tolerant chassis with

integrated handles

• Optional RapidRig™ frame with integrated

pitch, roll and yaw adjustments

Weight (chassis only)

68 lbs (31kg)

For challenging 3D venues that require extreme mechanical rigging or precise mechanical alignment, the TITAN 3D products can be ordered with DP’s RapidRig™ flying and stacking frame. The RapidRig™ frames provide integrated pitch, roll and yaw adjustments, simplifying installation and alignment accuracy. TITAN 3D models utilize the same lenses employed across the rest of DPI’s TITAN and LIGHTNING product range, so optical accuracy is always ensured.

Other key benefits of the TITAN 1080p-3D models include:

• High Bandwidth input >120Hz active stereoscopic DVI with no need for frame

doubling. This capability extends the dynamic range up to 16 bit for improved

contrast and color gamut. Both single-pipe and dual-pipe 3D sources are supported.

• Dual Flash Processing™ (DFP) – Enables distribution of 3D content via 60 Hz formats

by providing the option to frame-double the signal within the projector. When this option is selected, the input signal, having been processed and re-sized to map to

the native resolution of the projector, will also be frame-doubled to 120 Hz, and the

doubled frames interleaved. This produces imagery with the low flicker characteristics

of a native 120 Hz source, but without the infrastructure costs associated with

distributing and switching ultra-high bandwidth signals.

• Projector electronics which provide an interface to drive an infrared transmitter to

synchronize switching glasses with active displayed frames. The user can elect either to pass through an external sync pulse, or to use the reference generated internally by the projector. Adjustments are provided to accommodate the phase and dead time characteristics of different switching glasses.

• FastFrame™ technology, a revolutionary combination of hardware and firmware that

provides user adjustments to vastly reduce the artifacts and image blur typically associated with rapidly moving display content.

• Minimal video delay from input to screen - as low as 1 frame.

• Eight user-selectable inputs, including HDCP-compliant DVI plus SD/HD-SDI.

• High bandwidth DVI inputs offer Single, Twin, Dual & Dual Twin DVI connectivity.

• Up to 16 Bit color for breathtaking image reproduction.

• DPI’s ColorMax™ calibration capabilities including enhanced seven-point color

correction for broader color space and precise color alignment.

• DPI’s CoolTek™ engineering, delivers the highest lumen performance with the lowest power consumption, thermal (BTU) and noise level (dBA) output.

• MultiBlend™ – an advanced soft-edge capability for seamlessly meshing arrays of

projectors to create displays with ultra-high resolution or unusual aspect ratios.

• Intelligent Lens Mount (ILM) - provides the ability for the user to program up to 10 distinct presets for lens zoom, focus and shift. The ILM presets can be assigned and

automatically recalled, by source and input.

TITAN 1080p 3D Pro Series II displays - powerful tools for immersive large screen applications - bringing the precision of Digital Projection to your venue.

INPUT CAPABILITIES

Type

Composite S-Video Component

Interlaced/Std def Y, Cr/Pr, Cb/Pb, S

Graphics

Progressive RGB/Progressive Interlaced Hi def Y, Cr/Pr, Cb/PB

RGBHV (Progressive) Digital RGB

Serial Digital

SD/HD-SDI (SMPTE 259M/292M) DVI - High bandwidth

Dual - main Dual - sub

*The main & sub dual DVI inputs can be used in parallel to support dual-pipe 3D connectivity

Connector

BNC

4-pin mini DIN

BNCx4

BNCx5

D sub (15-pin)

DVI

BNC

DVI DVI

Quantity

1 1

TITAN 1080p 3D Pro Series II

1080p 3D-L

CORE TECHNOLOGY

5.8

146.9

8.5

216.9

19.6

498.5

21.4

543.5

Projector Dimensions

24.4

619.5

22.9

581.4

8.7

10.0

253.5

220.1

1.8

1.3

33.4

25.4

645.4

45.0

TITAN 1080p-3D side panel

Projector dimensions (in)

L1 25.4 W1 21.4 H1 10

Projector dimensions (mm)

L1 645.4 W1 543.5 H1 253.5

ADVANCED TECHNICAL SPECIFICATIONS

PARAMETERS

Native Color Temperature

HDTV Formats Supported

Scan Rates Supported

Remote Control

Automation Control

Operating/Storage Temperature

Operating Humidity

Thermal Dissipation

1080p 3D-P

1080i (50Hz, 60Hz), 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080 24sf, 720p (50, 60Hz), 480i, 480p

Inputs 1-7: Horizontal: 15kHz to 100kHz / Vertical: 24Hz to 85Hz - Input 8: 3D progressive 576p up to 1080p @ 120Hz

Addressable IR remote control, wireless and wired with loop-through / On board invertable keypad

(Single Lamp

Models)

6500°K ±1000°K; white balance-adjustment: 3000°K to 10000°K

User selectable Xenon-like colorimetry using dynamic optical and electronic enhancement.

1,981 BTU/hr 3,108 BTU/hr

shown with optional rigging frame

1080p 3D-L

Ultra Contrast

1080p 3D-P

Ultra Contrast

LAN connection via RJ45 / RS232 9-pin D type

Operating: 0 to 40°C / Storage: -10 to 50°C

20 to 80% non-condensing

(Dual Lamp

Models)

Fan Noise

Power Requirements

Power Consumption

580 watts maximum 910 watts maximum

Projectors Part #

TITAN 1080p 3D-L 110-403 TITAN 1080p 3D-P 109-583 TITAN 1080p 3D-L UC 110-657 TITAN 1080p 3D-P UC 109-322

TITAN 1080p Dual 3D 109-323

Less than 42dBA Less than 45dBA

100-240 VAC ±10%, 50/60Hz single phase

Accessories Part #

Single TITAN 3D Lamp & Housing* (2 required) 109-319

RapidRig

TITAN 1080p 3D Series Adjustable Ceiling Mount 108-499 Infrared Remote (Replacement) 105-023

* Includes high-performance replacement air filter(s)

Frame 107-956

TITAN 1080p Dual 3D Ultra Contrast 109-324

1 Based on 4-6 hour/day operational profile. Venue and application conditions may impact actual lamp life. See Digital Projection’s Product Warranty Statement for details on lamp warranty. Installations requiring horizontal or vertical tilt orientations greater than 15 degrees may reduce the

Lenses HB Part # HB Part #

actual operational hours of one of the two lamps.

0.67:1 105-607 107-195

1.12:1 105-608 105-608

1.12:1 (short) 105-609 105-609

1.16-1.49:1 109-236 109-359

1.39 - 1.87:1 105-610 107-196

1.87 - 2.56:1 105-611 107-197

2.56 - 4.16:1 105-612 107-198

4.16 - 6.96:1 105-613 107-199

6.92-10.36:1 109-235 109-358

DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.com

DIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.uk

DIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770

DIGITAL PROJECTION, ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238