Digital Juice SHARP SHOOTER Getting Started Manual

Getting Started Guide

The Digital Juice Sharpshooter (1) is a versatile shoulder-mount camera rig
which is lightweight, compact and easily configurable. It contains everything
you need to stabilize your camera, achieve smooth focus pulls and prevent
unwanted light from hitting your camera lens. It is a perfect solution for
everyone from the serious hobbyist to the documentary shooter who has
little time for extensive set-ups.

The rig is comprised of three main components: the gear-driven reversible Digital
Juice Standard Follow Focus which can be mounted to the left or right of the
camera lens, a lightweight, height-adjustable standard matte box with adjustable
flags, and the 15-mm rail and camera baseplate support system with 1/4 20
tie-down, two padded front grips and a curved gun-stock type shoulder support.
The 12-piece set can be configured in just about any way to suit your needs.
Each piece is easily adjusted so that you can dial in the best fit and ensure
the maximum amount of stability. There are multiple industry standard ¼-20
threaded attachment points so you can secure the unit to a tripod or attach other
accessories like an articulating arm for an external monitor. You can configure the
components as a simple lightweight shoulder rig for run-and-gun style shooting
or as a compact, versatile studio rig.

5

1

1

11

8

6

4

10

7

9

3

2

What’s Included:

• DJ Standard Follow Focus (2) with

one adjustable lens gear belt (3)

• Height-adjustable standard matte

box (4) with top flag (5), two
side-flags (6) and 15-mm rail
adapter (7)

• 15-mm adjustable rail system (8)

with two padded hand grips (9),
curved shoulder pad (10) and
camera base plate (11)

(continued on reverse >)

Getting Started Guide (continued)

Using & Adjusting Your DJ Sharpshooter Camera Rig:

Your DJ Sharpshooter camera rig has several possible adjustments that can be
changed to match your body type and equipment setup for a more ergonomic
experience. For example, you can change the distance of the matte box to your
lens (12) and the height of the matte box from the rails (13,14). You can also
adjust the follow focus gear drive’s position to the right or left of the camera lens

(15,16) and slide the follow focus unit along the rod mount assembly until it is

lined up with the lens gear belt attached to your camera lens (17).

15

16

17

12

13 14

PRECAUTIONS

When you mount your camera/lens combo and any other accessories
to your Sharpshooter rig, take a few minutes to double check that all of
the blue lever set screws have been securely tightened. Failure to do
so could result in damage to your rig and equipment.

When you mount your camera to the mounting plate, make sure the
tie-down screw is securely fastened.

Never drop, bend or try to modify the Sharpshooter rig or any
components beyond the scope of their adjustability. Doing so will
void your warranty.

Take care not to scrape, dent, or bend any of the rails in your
Sharpshooter rig as this will prevent the attachments from sliding
easily along the rods.

In order to slide the rails within the clasps on the various components, the blue
lever handles must be loosened by turning them in a counter-clockwise direction

(18). Make sure you don’t loosen too far, as they will come out of their threaded

holes if you do. To tighten the lever set screws once a component is in place,
turn them in a clockwise direction until they become snug. Take care not to
overtighten the set screws as this can strip the threaded hole.

18

For more information on adjusting the DJ Standard Follow Focus to fit
your camera and shooting setup, consult the seperate Getting Started
Guide for this component.

www.digitaljuice.com