DICE Electronics Universal RDS User Manual

Page 1
UNIVERSAL RDS
INTEGRATION KIT
Installation Guide/User manual
Page 2
2
UNIVERSAL RDS
Copyrights and Trademarks
Copyright 2011 DICE Electronics, LLC.
The DICE Electronics logo is a trademark of DICE Electronics, LLC.
All rights reserved.
Printed in the U.S.A.
Page 3
Table of Contents
Warning and safety
Product registration
Universal RDS kit contents
Frequency conguration settings
Compatible iPod & iPhone Models
Installation
Connection diagram
Note to Installers
Charging
Basic operation
Optional wireless remote funtion for iPod
Troubleshooting
Firmware update
Disclaimer & Warranty
Installation notes
..........................................................4
.........................................................5
..............................................6
.....................................6
..................................7
.......................................................................8
.........................................................9
............................................................10
.......................................................................11
.............................................................12
.............................................................14
............................................................17
...................................................18
............................................................19
UNIVERSAL RDS
3
......................13
Page 4
4
UNIVERSAL RDS
Warning and safety!
Please read these instructions carefully before proceeding. Failure to follow instructions may result in improper operation or injury. Neither DICE Electronics, LLC. nor Apple Inc., its regional ofces, distributors or resellers take any responsibility for any damage or injury as a result of using the integration kit.
- Do not open, disassemble or alter the interface in any way.
- Do not insert anything into the casing.
- Do not cut or try to alter cables in any way and always use the correct connections.
- Only operate unit when stationary or ask passengers to operate it for you.
- Do not allow the Apple iPod to distract you from driving.
- Exercise good judgement and keep your eyes on the road at all times.
- Do not expose unit to extreme temperatures, humidity or shock.
- Keep the unit and iPod away from uids.
- Keep away from children! - Interface components may contain small parts, can be broken or disassembled and components may become loose from vibration and heat. Small components and packaging materials may be a chocking hazard when handled by children.
Page 5
UNIVERSAL RDS
Congratulations on your purchase!
Thank you for purchasing the DICE Universal RDS integration kit for iPod. Please review our user manual and installation guide before operating the unit. This interface was designed and manufactured to seamlessly integrate with your vehicle’s factory entertainment system.
Product registration
In order to validate your warranty period and to receive telephone or online support and product rmware updates, you MUST register your DICE product.
To register your DICE product, please complete the following steps:
1. Visit http://www.register.diceelectronics.com
2. Look up and save the serial number of the product.
3. Complete the product registration form.
4. Submit the form.
5. Save the registration/support/warranty sheet in a safe place for future reference.
If you are unable to complete the registration via internet, please call DICE Electronics at 1-888-342-3999.
5
Page 6
6
Universal RDS kit contents
UNIVERSAL RDS
UNIVERSAL RDS
Universal RDS module
user manual
pro-install power
Frequency conguration settings:
ON/OFF Switch Positions
Module
frequency selector switch
OFF
ON
cable
DICE dock
cable
IR receiver
(optional)
wireless remote
FM (MHz) Dip switch 1 Dip switch 2
88.7
93.3
97.5
107.7
OFF
ON ON
OFF
OFF OFF
ON ON
(optional)
Page 7
UNIVERSAL RDS
Supported iPod models and rmware version requirements
7
Model Model
1G nano 160 GB classic
iPod 5G 5G nano
2G nano 3G touch
iPod classic iPhone 4
3G nano 4G touch
iPod touch 6G nano
iPhone
iPhone 3G
4G nano
120 GB classic
2G touch
iPhone 3GS
Firmware / OS Version Firmware / OS Version
1.3.1 2.0.4
1.3 1.0.2
1.1.3 iOS 4.2.1
1.1.2 iOS 4.2.1
1.1.3 iOS 4.2.1
iOS 3.1.3 1.1
iOS 3.1.3
iOS 4.2.1
1.0.4
2.0.1
iOS 4.2.1
iOS 4.2.1
Page 8
8
Installation
1.Verify compatibility, certain radios require antenna adapter(s), not included in the kit.
2. Disconnect battery
3. Remove radio from car
UNIVERSAL RDS
6. Test for 12V constant, 12V switched, and ground sources. Splice into with leads from power cable.
7. Route kit to glovebox or other accessible location.
8. Connect battery & test*
4. Set the DIP switches for the frequency selector switch to the desired setting.
OFF
ON
5. Install Universal RDS cable. Plug the fac­tory radio antenna to the receptacle on the module.
9. Complete install by re-installing radio
10. Save frequency to a preferred preset on the radio if desired.
Page 9
Connection Diagram
iPod
MENU
UNIVERSAL RDS
Wireless remote
(optional)
M U B L A
T
5 6
S I T
R
2 3
E C
T A
R
S
U
I
4
O
L
S
AY L
1
P
U N E M
IR receiver
(optional)
DICE dock cable for iPod
Module
(front)
9
antenna
out
antenna
in
Module(back)
upgrade port
USB
+12
(yellow)
power cable
ground
(black)
ignition
(red)
Page 10
10
UNIVERSAL RDS
Attention installer! Please read the following!
DICE Electronics strongly recommends that the unit be installed in an easily accessible place! DO NOT PLACE IT BEHIND THE RADIO!
Whether the unit is professionally or self installed, put the module where you, the end user can get to it easily in the future. (Have the installer show you where the box is.)
Installing the DICE module behind the radio will make it difcult to:
-Add possible future upgrades, changing software, adding new features, improving operation;
-Access the DIP switches located on the module;
-Remove the unit in case of failure.
MAKE SURE THAT THE MODULE IS IN AN ACCESSIBLE PLACE!
Page 11
UNIVERSAL RDS
Charging
The interface automatically charges the battery of the iPod when connected and your vehicle ignition key is in the ON position.
11
Charging may be shown by an icon that appears on the upper right corner of the iPod screen. May vary by model.
Page 12
12
UNIVERSAL RDS
Basic Operation
1. Power on the radio and select the FM source.
2. Tune the radio to the frequency set by the conguration switches (see pg 6)
3. Connect your iPod or iPhone via DICE docking cable for iPod to the Universal RDS module.
4. Select/control desired music on you iPod/iPhone.
5. Use the optional wireless remote for control.
Page 13
UNIVERSAL RDS
Optional wireless remote function for iPod
SOURCE
13
Module on/off
Shufe SONG (within a PLAYLIST) / Shufe ALBUM / Shufe off
Repeat one / Repeat all / Repeat off
Next Track
Previous Track
1
Skip to the next PLAYLIST
4
Skip to the previous PLAYLIST
Play / Pause (when paused, the radio will return to FM station)
No function assigned to this button
3
Skip to the next ALBUM
6
Skip to the previous ALBUM
* ARTIST is currently not supported
Page 14
14
Troubleshooting
Problem Solution
Text is not displaying on the screen of the radio.
iPod does not charge.
Music is distorted or sound level is too low with iPod connected.
Why is the remote not controlling the iPod?
UNIVERSAL RDS
Text from the iPod will only display if the radio is RDS capable. Look for RDS capability: RDS capable radios will show text in addition to the frequency such as song information while listening to certain FM stations.
Check all connections. See if iPod charges while connected to computer or wall charger. You may need to reset the iPod.
Make sure all EQ and BASS boost options are turned off on your iPod.
Please make sure that the iPod dock connection is not loose. Make sure that an iPod case is not preventing the dock connector from being fully seated. Disconnect and reconnect the device. If iPod is not responding please try resetting it. Check the wireless remote’s battery and IR receiver connection.
Page 15
Problem Solution
No audio from iPod source.
Why does the radio display show “EMPTY/STOP” and no music plays?
Cannot hear audio from iPod.
UNIVERSAL RDS
15
Reset the iPod. Verify proper connection to iPod/interface. Check for compatibility.
The iPod does not have playable audio les or end of a playlist is reached. Please select a new Playlist by browsing there on the iPod or remote.
Check DIP switch settings and make sure that radio is tuned to selected frequency. With the ignition OFF, disconnect Power harness from module for a few seconds and reconnect.
Why does category read “PRESELCTD”?
Playback of content selected on the iPod before connected to the interface continues until new content is selected.
Page 16
16
Problem Solution
Text from iPod/iPhone music App doesn’t show.
I can’t control the iPod/iPhone from the radio.
Cannot hear AM/FM radio stations.
UNIVERSAL RDS
Audio stream from internet radio is routed through the Universal RDS kit, but text information is not available.
Content control must be done directly on the iPod/iPhone, or via the optional remote control.
When an iPod/iPhone is connected to the Universal RDS kit, the interface cuts out the factory antenna feed to prevent interference form strong local stations. Disconnecting the iPod/iPhone restores the antenna connection.
If you have the optional remote control, you can press the SOURCE button to switch between iPod/iPhone and factory antenna feed.
Page 17
UNIVERSAL RDS
Firmware update
STEP 1: Disconnect the Universal RDS module from the vehicle.
STEP 2: Download and install necessary software from www.diceelectronics.com
STEP 3: Open software to follow instructions for updating Universal RDS unit.
STEP 4: Plug in Universal RDS via mini USB cable and update.
STEP 5: Disconnect and reinstall the unit into the vehicle.
Universal RDS module
FW Update Power
Mini USB port for software update
17
Page 18
18
UNIVERSAL RDS
Disclaimer & Warranty
Important disclaimer, please read!
Unauthorized reproduction or reverse engineering is strictly prohibited! Intellectual property included is distributed under specic license agreement with respective owners and is licensed only, not sold. No warranty, explicit or implied, is stated. Neither DICE Electronics, LLC., nor any of its agents, distributors, dealers or vendors shall be liable for damages.
IN NO EVENT SHALL DICE ELECTRONICS’ LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION.
Support and warranty!
If you experience any problems or need help, please contact you local dealer or call DICE Electronics, LLC. At 888-342-3999 or visit us at http://diceelectronics.com/product-support Products carry a 1 year limited warranty that protects you from defects in material and workmanship of products sold by DICE Electronics or its authorized agents, distributors and dealers. The warranty period begins the day a product is purchased by the end user. Products found to be defective during the warranty period will either be repaired or replaced by DICE Electronics at no charge unless warranty is void. Unauthorized attempt of repair or alteration of the product in any way immediately voids this warranty. Warranty does not extend to cosmetics or nish. A DICE product specialist must determine that a defect is present in the product and issue an RMA. Be sure that all wiring is connected as described in the user manual and all related equipment is functioning properly. DICE Electronics disclaims any liability for other incurred damages resulting from product defects. Any expenses in the removal and reinstallation of products are not covered by this warranty. PLEASE NOTE: International customers requiring a product replacement, please contact the dealer your product was purchased from!
Page 19
Installation notes:
Congured frequency:
Serial number:
UNIVERSAL RDS
19
Page 20
Universal RDS
www.diceelectronics.com
UNI-150-PRO-033111
Loading...