Please read these instructions carefully before proceeding. Failure to follow instructions may result in
improper operation or injury. Neither DICE Electronics nor Apple Inc., its regional ofces, distributors or
resellers take any responsibility for any damage or injury as a result of using the integration kit.
- Do not open, disassemble or alter the interface in any way.
- Do not insert anything into the casing.
- Do not cut or try to alter cables in any way and always use the correct connections.
- Only operate unit when stationary or ask passengers to operate it for you.
- Do not allow the Apple iPod/iPhone to distract you from driving.
- Exercise good judgement and keep your eyes on the road at all times.
- Do not expose unit to extreme temperatures, humidity or shock.
- Keep the unit and iPod/iPhone away from uids.
- Keep away from children! - Interface components may contain small parts, can be broken or disassembled
and components may become loose from vibration and heat. Small components and packaging materials
may be a choking hazard when handled by children.
Congratulations on your purchase!
Thank you for purchasing this integration kit. Please review this booklet before operating the unit. This
interface was designed and manufactured to seamlessly integrate with your vehicle’s factory audio system.
Product registration
We recommend registering your DICE product so you can receive news about important rmware updates
and have unlimited access to our online support system.
To register your DICE product, please complete the following steps:
1. Visit http://www.register.diceelectronics.com
2. Look up and save the serial number of the product.
3. Complete the product registration form.
4. Submit the form.
5. Save the registration/support/warranty sheet in a safe place for future reference.
If you are unable to complete the registration via internet, please call DICE Electronics at 1-888-342-3999.
Prior to installation make sure the module’s rmware is up to date to ensure compatibility
with the latest features and enhancements. Please refer to page 34 to update rmware.
5
6
Silverline DUO kit contents
for selected Honda/Acura vehicles
Installation Guide/User manual
Silverline DUO module
user manual
Optional accessories (sold separately):
AUX connector
IR Receiver &
Remote controller
For more accessories, visit www.diceelectronics.com
Cradle
(DCR-50-PTH)
iPod docking
cable
Vehicle Interface
Harness
DIP switches overview
The conguration switches located on the Silverline DUO module are used to set various operation modes of
the interface. Incorrect DIP switch settings may cause the interface to not work properly or to not operate at all.
Disconnect the vehicle harness from the module and set the ignition to the off position for 60 seconds
after changing the switches then reconnect the module!
Silverline DUO module
7
8
DIP switch settings
The following DIP switch settings are used to congure the Silverline DUO module to interface
with the various vehicle radios. Before installation, set the DIP switch to the position shown for
the corresponding radios.
Car conguration switches
CD changer (CDC)
OFF OFF
Satellite (SAT)
ON
ON
Use for radios that have
integrated satellite radio or
do not support SAT mode.
External CDC (trunk or glove
box) must be disconnected.
Text display is not available
in this emulation. Sirius
Connect is NOT supported in
this mode.
Use on radios with SAT
or XM button for best
experience. Must be
selected to support Sirius
Connect tuner. Available
on North American radios.
Factory SAT tuner can be
retained if this integration
kit is connected directly to
the tuner.
Supported iPod models and rmware version requirements
ModelModel
1G nano160 GB classic
iPod 5G5G nano
2G nano3G touch
iPod classiciPhone 4
3G nano
iPod touch
iPhone
iPhone 3G
4G nano
120 GB classic
2G touch
iPhone 3GS
Firmware / OS VersionFirmware / OS Version
1.3.12.0.4
1.31.0.2
1.1.3iOS 5
1.1.2iOS 5
1.1.3
iOS 3.1.3
iOS 3.1.3
iOS 4.2.1
1.0.4
2.0.1
iOS 4.2.1
iOS 5
iPhone 4S iOS 5
4G touch
6G nano
9
iOS 5
1.2
10
Attention installer! Please read the following!
DICE strongly recommends that the unit be installed in an easily accessible place!
DO NOT PLACE IT BEHIND THE RADIO AND DO NOT HIDE UNDER CARPET!
Whether the unit is professionally or self installed, put the module where you, the end user can get to it easily
in the future. (Have the installer show you where the interface module is installed.)
Installing the module behind the radio will make it difcult to:
-Add possible future upgrades, changing software, adding new features, improving operation;
-Access the AUX input on the module to attach any audio device;
-Access the DIP switches located on the module;
-Remove the unit in case of failure.
MAKE SURE THAT THE MODULE IS IN AN ACCESSIBLE PLACE!
Connection diagram
11
Silverline DUO module
IR receiver
(optional)
(front)
Vehicle Inter-
face Cable
SIRIUS connector*
SIRIUS SAT radio
(not included)
AUX connector
(optional)
Auxiliary device
(not included)
Silverline DUO module
(back)
Update port
(USB to PC)
iPod dock cable*
* Do not connect the iPod dock cable under any circumstance to the SIRIUS module
connector! Improper connection can cause permanent damage to iPod/SIRIUS module.
iPod/iPhone
(not included)
12
Installation
1. Verify compatibility
2. Disconnect battery
5. Route kit to glove box or other accessible location
3. Remove radio from car
4. Install Silverline DUO cable
Some radios will enter an anti-theft security mode and will lock requiring the radio’s security code
to be entered to unlock it. This code can be requested from the vehicle’s dealership.
6. Connect battery & test
7. Complete install by re-installing radio
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.