Page 1
MASONRY SAW
PARTS LIST
MODEL
CC500MXL2
December 2013
Part #1801098
Page 2
Notification of Spark Arrester Requirement for
Proposition 65
State of California
Warning !
Engine exhaust and some its constituents are known to the State
of California to cause cancer, birth defects, and/or other
reproductive harm.
State of California
It is a violation of Section 4442 or 4443 to use or operate the
engine on any forest-covered, brush-covered, or grass-covered land
unless the engine is equipped with a spark arrester, as defined in
Section 4442, maintained in effective working order or t he engine
is constructed, equipped, and maintained for the prev ent ion of fire
pursuant to Section 4443.
Page 3
TABLE OF CONTENTS
Description Page No.
Pictorial Page Index – Electric Saw . ......... ...... …….. . ……………………………….…………………….. 4-5
Pictorial Page Index – Gas Saw ………………………………………………………….……………………..6-7
1.5HP-1PH Electric Motor Mount Assembly………………………………………….……………………….. 8-9
2.0HP-1PH Electric Motor Mount Assembly…………………………………………………………………..10-11
2.5HP-1PH Electric Motor Mount Assembly………………………………………………………….……… 12-13
3.0HP-1PH Electric Motor Mount Assembly………………………………………….……………………… 14-15
4.8HP Gas Engine Mount Assembly……………………………………………………………….….………16-17
5.5HP Gas Engine Mount Assembly……………………………………………………………….….………18-19
6.5HP Gas Engine Mount Assembly……………………………………………………………….................20-21
Frame Assembly………………………………………………………………….…………………………….…22
Upper Frame Head Weldment……………………………………………….……………….……………..…24-25
Depth Lock Assembly……………………………………………………………….…………………………..24-25
Leveling Arm Assembly…………………..………………………………………………………………………26
Conveyor Cart Assembly…. …………………………………………………………………………………….27
Blade Guard Assembly - Electric ........................……………………………………………………………..28
Blade Guard Assembly – Gas…………………….……………….…………………………………………….29
Blade Shaft Assembly-Electric……………………………………….………………………………………….30
Blade Shaft Assembly-Gas………………………………………………………………………………………31
Belt Guard Assembly – Electric………………………………………………………………………………….32
Belt Guard Assembly – Gas………………………….……………………………………………………….....33
Motor Belt Drive – Electric…………………………………………………………………………………….....34
Motor Belt Drive – Gas…………………………………………………………………………………………...35
Diaphram Pump Assembly – Gas………………………………………………….……………………….......36
Water Hose Assembly – Gas…………………………………………………………………………………….37
Water Pump Assembly – Electr ic 115V……………………………………………………….………………..38
ter Pump Mounting Bracket and Belt Guard - Gas…………………………………….…………………39
Wa
Warranty……………………………………………………………………………….………………. Rear Cover
Page 4
28
4
CC500MXL2 Electric Saw
Pictorial Page Index
12
10 148
30 32
22
24
24
Page 5
24
5
CC500MXL2 Electric Saw
Pictorial Page Index
26
27
38
Page 6
27
6
CC500M XL2 Gas Saw
Pictorial Page Index
18 2016
36
39
29
24
22
Page 7
24
7
CC500MXL2 Gas Saw
Pictorial Page Index
33 35
26
22
37
Page 8
1.5 HP - 1 Phase Electric Motor Mount Assembly
8
18
17
1
16
15
2
3
4
6
5
7
3
14
3
12
3
10
3
13
8
10
9
11
10
Page 9
1.5 HP - 1 Phase Electric Motor Mount Assembly
9
ITEM PART NO. QTY. DESCRIPTION
1 2600573 1 Baldor 1.5HP 115/230V Induction Motor
2 2900313 3 Cap Screw, Hex Hd., M8-1.25 x 30mm
3 2901583 12 M8 Washer (18mm OD)
4 2701762 1 Switch Box
5 2800309 1 Switch Box Lid W/Gaskets & Screws
6 2800232 1 Switch
7 2900009 2 Flat Washer, 1/4" SAE
8 2900024 2 Lock Washer, 1/4" Split
9 2900008 2 Cap Screw, Hex Hd., 1/4-20 x 1"
10 2900303 5 Lock Nut, M8-1.25 Nylon Insert
11 2902021 1 D18 x d8 - M8 x 1.25 x 87L Swing bolt
12 6030398 1 Motor Offset Mounting Plate
13 2800087 1 Plug, Nema L5-20P,125VAC-20Amp
14 2900336 1 Cap Screw, Hex Hd., M8-1.25 x 45mm
15 2800159 1 Toggle Switch, DPDT, On/On
16 2704740 1 Guard for Voltage Switch
17 2800355 1 Thermal Overload Switch - 1.5 HP Baldor
18 2800354 1 Rubber Reset Cover
Page 10
2.0 HP - 1 Phase Electric Motor Mount Assembly
10
18
17
1
2
3
16
15
1314
3
4
12
5
6
3
10
7
8
9
3
10
11
3
10
Page 11
2.0 HP - 1 Phase Electric Motor Mount Assembly
11
ITEM PART NO. QTY. DESCRIPTION
1 2600675 1 Baldor 2HP 1PH 115/230 Dual Voltage
2 2900313 3 Cap Screw, Hex Hd., M8-1.25 x 30mm
3 2901583 12 M8 Washer (18mm OD)
4 2701762 1 Switch Box
5 2800309 1 Switch Box Lid W/Gaskets & Screws
6 2800232 1 Switch
7 2900009 2 Flat Washer, 1/4" SAE
8 2900024 2 Lock Washer, 1/4" Split
9 2900008 2 Cap Screw, Hex Hd., 1/4-20 x 1"
10 2900303 5 Lock Nut, M8-1.25 Nylon Insert
11 2902021 1 D18 x d8 - M8 x 1.25 x 87L Swing bolt
12 6030398 1 Motor Offset Mounting Plate
13 2800087 1 Plug, Nema L5-20P,125VAC-20Amp
14 2900336 1 Cap Screw, Hex Hd., M8-1.25 x 45mm
15 2800159 1 Toggle Switch, DPDT, On/On
16 2704740 1 Guard for Voltage Switch
17 2801027 1 Thermal Overload Switch - 2HP Baldor
18 2800354 1 Rubber Reset Cover
Page 12
2.5HP - 1PH - Electric Motor Mount Assembly
12
18
17
1
2
16
15
14
3
4
5
6
7
8
9
3
10
11
3
12
13
3
10
3
10
Page 13
2.5HP - 1PH Electric Motor Mount Assembly
13
ITEM PART NO. QTY. DESCRIPTION
1 2600574 1 Baldor 2.5HP 1PH 115/230V Induction Motor
2 2900313 3 Cap Screw, Hex Hd., M8-1.25 x 30mm
3 2901583 12 M8 Washer (18mm OD)
4 2701762 1 Switch Box
5 2800309 1 Switch Box Lid W/Gaskets & Screws
6 2800232 1 Switch
7 2900009 2 Flat Washer, 1/4" SAE
8 2900024 2 Lock Washer, 1/4" Split
9 2900008 2 Cap Screw, Hex Hd., 1/4-20 x 1"
10 2900303 5 Lock Nut, M8-1.25 Nylon Insert
11 2902021 1 D18 x d8 - M8 x 1.25 x 87L Swing bolt
12 6030398 1 Motor Offset Mounting Plate
13 2800087 1 Plug, Nema L5-20P,125VAC-20Amp
14 2900336 1 Cap Screw, Hex Hd., M8-1.25 x 45mm
15 2800159 1 Toggle Switch, DPDT, On/On
16 2704740 1 Guard for Voltage Switch
17 2701650 1 Thermal Overload Switch - 2.5 HP Baldor
18 2800354 1 Rubber Reset Cover
Page 14
3.0HP - 1 PH Electric Motor Mount Assembly
14
Counter Clockwise Rotation
18
17
1
2
14
3
3
16
15
13
4
5
6
7
8
9
3
10
11
12
3
10
3
10
Page 15
3.0HP - 1 PH Electric Motor Mount Assembly
15
Counter Clockwise Rotation
ITEM PART NO. QTY. DESCRIPTION
1 2600575 1 Baldor 3HP 1PH 220V-50 CCW Rotation
2 2900313 3 Cap Screw, Hex Hd., M8-1.25 x 30mm
3 2901583 12 M8 Washer (18mm OD)
4 2701762 1 Switch Box
5 2800309 1 Switch Box Lid W/Gaskets & Screws
6 2800232 1 Switch
7 2900009 2 Flat Washer, 1/4" SAE
8 2900024 2 Lock Washer, 1/4" Split
9 2900008 2 Cap Screw, Hex Hd., 1/4-20 x 1"
10 2900303 5 Lock Nut, M8-1.25 Nylon Insert
11 2902021 1 D18 x d8 - M8 x 1.25 x 87L Swing bolt
12 6030398 1 Motor Offset Mounting Plate
13 2800087 1 Plug, Nema L5-20P,125VAC-20Amp
14 2900336 1 Cap Screw, Hex Hd., M8-1.25 x 45mm
15 2800159 1 Toggle Switch, DPDT, On/On
16 2704740 1 Guard for Voltage Switch
17 2801028 1 Thermal Overload Switch - 3HP Baldor
18 2800354 1 Rubber Reset Cover
Page 16
Honda 4.8HP Engine Assembly
16
1
2
18
3
2
4
5
3
6
7
8
9
10
16
3
6
15
17
Used to Attach Water
Pump Belt Guard
3
11
12
12
14
2
3
13
3
11
6
Page 17
Honda 4.8HP Engine Assembly
17
ITEM PART NO. QTY. DESCRIPTION
1 2600091 1 Honda GX160 4.8 HP Horizontal engine
2 2900303 9 Lock Nut, M8-1.25 Nylon Insert
3 2901583 13 M8 Washer (18mm OD)
4 2902025 4 Fender Washer 5/16 x 1.175 x 0.063"
5 2502149 4 Ring Bushing
6 2902024 5 Hex cap screw, M8 x 1.25 x 40L
7 6030278 4 Tube
8 2502151 4 Step Bushing
9 2901336 4 Flat Washer, M8
10 2907018 4 Cap Screw, Hex Hd., M8-1.25 x 50mm
11 2900763 4 Lock Washer, M8 Split
12 2900360 3 Cap Screw, Hex Hd., M8-1.25 x 25mm
13 2902022 1 D18 x d8 - M8 x 1.25 x 86L Swing bolt
14 6030475 1 Spacer, D12.5 x d8.5 x 4L
15 6030427 1 Vibration Damping Plate
16 6030426 1 Engine Mounting Plate
17 2900589 2 Cap Screw, Hex Hd., 5/16-24 x 3/4"
18 6030108 1 Oil Drain Assembly
Page 18
Briggs 5.5HP Engine Assembly
18
1
2
3
18
7
8
9
10
2
4
5 16
3
6
3
6
15
17
Used to Attach Water
Pump Belt Guard
11
12
14
2
3
3
3
12
11
6
13
Page 19
Briggs 5.5HP Engine Assembly
19
ITEM PART NO. QTY. DESCRIPTION
1 2600601 1 Briggs 5.5HP Vanguard
2 2900303 9 Lock Nut, M8-1.25 Nylon Insert
3 2901583 13 M8 Washer (18mm OD)
4 2902025 4 Fender Washer 5/16 x 1.175 x 0.063"
5 2502149 4 Ring Bushing
6 2902024 5 Hex cap screw, M8 x 1.25 x 40L
7 6030278 4 Tube
8 2502151 4 Step Bushing
9 2901336 4 Flat Washer, M8
10 2907018 4 Cap Screw, Hex Hd., M8-1.25 x 50mm
11 2900763 4 Lock Washer, M8 Split
12 2900360 3 Cap Screw, Hex Hd., M8-1.25 x 25mm
13 2902022 1 D18 x d8 - M8 x 1.25 x 86L Swing bolt
14 6030475 1 Spacer, D12.5 x d8.5 x 4L
15 6030427 1 Vibration Damping Plate
16 6030426 1 Engine Mounting Plate
17 2900589 2 Cap Screw, Hex Hd., 5/16-24 x 3/4"
18 6030249 1 Oil Drain Assembly
Page 20
Lifan 6.5HP Engine Assembly
20
1
2
3
2
4
5
18
17
Used to Attach Water
Pump Belt Guard
7
8
10
3
6
9
16
3
6
15
14
2
3
11
12
12
3
13
3
11
6
Page 21
Lifan 6.5HP Engine Assembly
21
ITEM PART NO. QTY. DESCRIPTION
1 2601708 1 Lifan 6.5HP Engine
2 2900303 9 Lock Nut, M8-1.25 Nylon Insert
3 2901583 13 M8 Washer (18mm OD)
4 2902025 4 Fender Washer 5/16 x 1.175 x 0.063"
5 2502149 4 Ring Bushing
6 2902024 5 Hex cap screw, M8 x 1.25 x 40L
7 6030278 4 Tube
8 2502151 4 Step Bushing
9 2901336 4 Flat Washer, M8
10 2907018 4 Cap Screw, Hex Hd., M8-1.25 x 50mm
11 2900763 4 Lock Washer, M8 Split
12 2900360 3 Cap Screw, Hex Hd., M8-1.25 x 25mm
13 2902022 1 D18 x d8 - M8 x 1.25 x 86L Swing bolt
14 6030475 1 Spacer, D12.5 x d8.5 x 4L
15 6030427 1 Vibration Damping Plate
16 6030426 1 Engine Mounting Plate
17 2900868 2 Cap Screw, Hex Hd., M8-1.25 x 16mm
18 6030108 1 Oil Drain Assembly
Page 22
Frame Assembly
22
9
8
14
13
12
1
11
2
10
15
5
4
7
6
3
ITEM PART NO. QTY. DESCRIPTION
1 6030395 1 Frame Weldment
2 2907007 4 M10 x 15L Knob
3 2506354 4 25mm Square tube cap
4 6030423 4 Leg
5 1800506 2 Core Cut Decal
6 6030021 1 Hex Wrench, 3/4"
7 6030030 1 Splash Curtain
8 2500816 3 Curtain Ring, 1"
9 2900799 1 Cap Screw, Hex Hd., M10-1.25 x 40mm
10 2900333 2 Cap Screw, Hex Hd., M10-1.5 x 25mm
11 6030404 2 Frame Rails CC500MXL2
12 2900010 10 Lock Nut, 1/4-20 Nylon
13 2900009 10 Flat Washer, 1/4" SAE
14 2900591 10 RHSNBOLT 0.25-20 X 0.75-N
15 6043052 1 Drain Plug with Chain
Page 23
23
Intentionally Blank
Page 24
Upper Frame - Head Weldment Assembly
24
22
2
3
4
18
19
20
7
5
15
4
5
17
6
1
21
5
12
13
14
4
15
2
3
23
9
8
10
16
16
25
26
25
24
Page 25
Upper Frame - Head Weldment Assembly
25
ITEM PART NO. QTY. DESCRIPTION
1 6030406 1 Cutting head mounting plate
2 2500575 2 Flange Block Bearing, 7/8"
3 2900372 4 Carriage Bolt M10 x 35
4 2901356 4 Flat Washer, M10
5 2900304 4 Lock Nut, M10-1.5 Nylon Insert
6 2500203 1 Grommet, 3/4" I.D.
7 6091205 1 Cutting Head Plunge Handle Assembly
8 2907014 2 M6 Washer, Lock
9 2900310 2 Cap Screw, Hex Hd., M6-1.0 x 20mm
10 2907011 2 M6 Washer, Narrow
11 6030419 1 Blade Shaft Cover Weldment
12 2900544 1 Cap Screw, Hex Hd., M6-1.0 x 12mm
13 2900765 1 Lock Washer, M6 Split
14 2901494 1 Flat Washer, M6
15 2900706 2 Grease Zerk, 1/4-28 Straight
16 2506356 2 18mm End cap
17 2500559 1 Lee Spring LE-031 D8
18 2900602 1 Eye Bolt, 3/8-16 x 6"
19 2900014 1 Flat Washer, 3/8" SAE
20 2900018 1 Locknut, 3/8-16, Nylon
21 2900262 1 Hairpin Cotter
22 2500001 1 7/8" Handle Grip
Depth Lock #6053541
ITEM PART NO. QTY. DESCRIPTION
23 6030269 1 Depth Lock
24 2504589 1 M10 x 1.5 x 32mm Adjustable Handle
25 2900014 2 Flat Washer, 3/8" SAE
26 2902016 1 3/8 Waved Lock Washer
Page 26
Leveling Arm Assembly
26
9
2
5
1
5
3
4
7
5
5
ITEM PART NO. QTY. DESCRIPTION
1 6030271 1 Leveling Bracket
2 6030422 1 Leveling Arm
3 2900262 1 Hairpin Cotter
4 2907016 1 8mm X 10mm Shoulder Screw
5 2901356 4 Flat Washer, M10
6 2900302 1 Lock Nut, M6-1.0 Nylon Insert
7 2901494 2 Flat Washer, M6
8 2907012 1 Cap Screw, Hex Hd., M6-1.0 x 40mm
9 2900600 1 Clevis Pin, 3/8" Dia. x 1"
6
8
7
Page 27
Conveyor Cart - #6030443
27
1
3
4
2
5
7
6
12
11
10
9
8
ITEM PART NO. QTY. DESCRIPTION
1 6030413 1 Cart Insert
2 6030409 2 Guide Roller Assembly
3 6030022 1 Rip Guide (Tapped) Block Saw
4 2900540 1 Thumb Screw, M6 X 30mm
5 2500659 1 Rule, Adhesive 12" L-R
6 6030408 1 Measuring Stop
7 6030407 1 Conveyor Cart Cast with Injected Rubber
8 2900868 3 Cap Screw, Hex Hd., M8-1.25 x 16mm
9 2900763 3 Lock Washer, M8 Split
10 2901336 3 Flat Washer, M8
11 2500660 1 Rule, Adhesive 12" R-L
12 2900070 2 Wood Screw, #8 X 1.00"
13 6030410 2 Type 10 Flat Roller Assemby
13
Page 28
Blade Guard Assembly - Electric
28
3
6
5
4
7
8
2
1
14
13
9
10
11
ITEM PART NO. QTY. DESCRIPTION
1 6030405 1 Blade Guard Weldment
2 6015135 1 Male 1/4" PT to 5/16" Barbed Valve Fitting
3 2900058 1 Flat Washer, 1/2" SAE
4 3202095 1 1/4 PT T-Shape Female Connector
5 3202094 2 Male 1/4 PT to barbed 5/16" adapter
6 3203004 2 8mm x 12mm x 330L Water Hose
7 2902019 2 B18.2.3.1M - Hex cap screw, M5 x 0.8 x 10 --10N
8 3204611 2 Clamp,1/2" Black Nylon
9 2502165 1 1/2" Heavy Duty E-Style Retaining Clip
10 6030273 1 Bearing Housing Weldment
11 2502162 2 12 X 10 X 32mm Bearing
12 2900310 4 Cap Screw, Hex Hd., M6-1.0 x 20mm
13 2900765 4 Lock Washer, M6 Split
14 2901494 4 Flat Washer, M6
12
Page 29
Blade Guard Assembly - Gas
29
3
6
2
5
4
1
7
8
8
7
ITEM PART NO. QTY. DESCRIPTION
1 6030405 1 Blade Guard Weldment
2 3204211 1 Male 1/4 PT to barbed 3/8" straight valve fitting
3 2900058 1 Flat Washer, 1/2" SAE
4 3202095 1 1/4 PT T-Shape Female Connector
5 3202094 2 Male 1/4 PT to barbed 5/16" adapter
6 3203004 2 8mm x 12mm x 330L Water Hose
7 2902019 2 B18.2.3.1M - Hex cap screw, M5 x 0.8 x 10 --10N
8 3204611 2 Clamp,1/2" Black Nylon
9 2502165 1 1/2" Heavy Duty E-Style Retaining Clip
10 2502162 2 12 X 10 X 32mm Bearing
11 2900310 4 Cap Screw, Hex Hd., M6-1.0 x 20mm
12 2900765 4 Lock Washer, M6 Split
13 2901494 4 Flat Washer, M6
14 6030273 1 Bearing Housing Weldment
9
14
13
12
11
106
Page 30
Blade Shaft Assembly - Electric
30
1
2
3
4
5
6
7
6
4
6
7
6
ITEM PART NO. QTY. DESCRIPTION
1 2900539 1 Cap Screw, Hex Hd., 1/2-20 x 1" LH
2 6030313 1 Outer Flange, 4" w/o Pin
3 6030097 1 Bladeshaft w/ Inner Flange LH
4 2900372 4 Carriage Bolt M10 x 35
5 2500575 2 Flange Block Bearing, 7/8"
6 2901356 4 Flat Washer, M10
7 2900304 4 Lock Nut, M10-1.5 Nylon Insert
8 2500640 1 Pulley, 2AK30 - 7/8"
9 6048229 1 Key, 3/16" Sq. x 1-1/4"
5
8
4
9
Page 31
Blade Shaft Assembly- Gas
31
1
2
3
4
5
6
7
6
4
6
7
6
4
8
5
4
ITEM PART NO. QTY. DESCRIPTION
1 2900539 1 Cap Screw, Hex Hd., 1/2-20 x 1" LH
2 6030313 1 Outer Flange, 4" w/o Pin
3 6030097 1 Bladeshaft w/ Inner Flange LH
4 2900372 4 Carriage Bolt M10 x 35
5 2500575 2 Flange Block Bearing, 7/8"
6 2901356 4 Flat Washer, M10
7 2900304 4 Lock Nut, M10-1.5 Nylon Insert
8 2505431 1 Ribbed J Pulley (40mm) and Bushing (22.2mm)
Page 32
Belt Guard Assembly
32
(Electric Models Only)
5
4
2
3
2
3
To Side
of Head Weldment
6
2
1
3
4
ITEM PART NO. QTY. DESCRIPTION
1 6030416 1 Belt Guard, Electric
2 2901494 6 Flat Washer, M6
3 2900765 6 Lock Washer, M6 Split
4 2900544 4 Cap Screw, Hex Hd., M6-1.0 x 12mm
5 6030401 1 Belt guard mounting bracket
6 2900341 2 Cap Screw, Hex Hd., M6-1.0 x 16mm
Page 33
Belt Guard Assembly
33
(Gas Models Only)
1
5
3
2
2
6
3
4
2
7
4
3
2
4
2
8
2
3
5
ITEM PART NO. QTY. DESCRIPTION
1 6030401 1 Belt guard mounting bracket
2 2901494 8 Flat Washer, M6
3 2900765 6 Lock Washer, M6 Split
4 2900341 3 Cap Screw, Hex Hd., M6-1.0 x 16mm
5 2900544 4 Cap Screw, Hex Hd., M6-1.0 x 12mm
6 6030417 1 Belt Guard -Gas
7 2900302 1 Lock Nut, M6-1.0 Nylon Insert
8 6047716 1 Belt Guard Brace
Page 34
Electric Motor Belt Drive Assembly
34
1
2
3
ITEM PART NO. QTY. DESCRIPTION
1 2500032 2 V-Belt 4L-390
2 2500639 1 Pulley, 2AK22 X 7/8"
3 6048229 1 Key, 3/16" Sq. x 1-1/4"
Page 35
Gas Engine Belt Drive
35
1
2
3
ITEM PART NO. QTY. DESCRIPTION
1 2500921 1 Pulley, 3L-2.17-1G X 3/4"
2 2506476 1 V-Belt 3L-290
3 2500683 1 Poly V-Belt, 400J6
4 2505424 1 34MM Bore 6 ribbed J pulley and 19.1MM Bore QD Bushing
4
Page 36
Diaphram Pump Assembly
36
7
6
Gas Model
4
5
4
8
12
11
3
2
9
10
11
14
13
ITEM PART NO. QTY. DESCRIPTION
1 2600288 1 Diaphram Pump
2 2502247 1 Retaining Ring, Ext 12mm
3 6030428 1 Diaphragm Pump Shaft
4 2708042 2 6001 Bearing 12mm ID X 28mm OD X 8mm
5 2900239 1 Friction Washer, 1/2"
6 6030429 1 Pump Bearing Stand
7 6030431 1 1/2" (12.7mm) Bore V-belt pulley
8 2900036 1 Set Screw, Soc. Hd., 5/16-18 x 1/4"
9 6030411 1 Spacer, Outter Cart
10 2902023 1 D18 x d8 - M8 x 1.25 x 40L Eyebolt
11 2901583 3 M8 Washer (18mm OD)
12 2900303 1 Lock Nut, M8-1.25 Nylon Insert
13 2900760 1 Cap Screw, Hex Hd., M8-1.25 x 35mm
14 2900763 2 Lock Washer, M8 Split
15 2900868 1 Cap Screw, Hex Hd., M8-1.25 x 16mm
16 2702175 2 Port Fitting, 3/8" Barb 90 Degree
11
14
15
16
1
16
Page 37
2
37
Connectsto
BladeGuard
Water Hose Assembly - Gas
1
8
3
4
5
7
6
ITEM PART NO. QTY. DESCRIPTION
1 6084207 1 Water Flow Valve Assembly
2 6079575 1 Hose, 1/2" OD x 3/8" ID Clear Braided - 40" L
3 6060416 1 Hose, 1/2" OD x 3/8" ID Clear Braided - 9" L
4 2500926 1 Ultra Flow Bulb, Primer
5 6075108 1 Hose, 1/2" OD x 3/8" ID Clear Braided - 10" L
6 2501373 1 Plug, 3/4" Hole
7 3200234 1 Fitting, 1/2" MPT to 3/8" Hose Barb
8 6082203 1 Hose, 1/2" OD x 3/8" ID Clear Braided - 23" L
Page 38
Water Pump Assembly - Electric
38
#6030060
3
1
2
ITEM PART NO. QTY. DESCRIPTION
1 2600201 1 Water Pump, Submersible 115V, 2.5 GPM (150 GPH)
2 3200231 1 Fitting, 1/4 FPT to 1/4 Hose Barb
3 6030035 1 Hose, 1/4 x 3/8 x 40" for Water Pump
Page 39
Water Pump Mounting Bracket and Belt Guard
39
Gas Engine
SIDE TOWARDS ENGINE
4
5
3
2
12
7
11
1
See Note
5
11
9
2
Below
8
2
10
2
5
2
6
8
7
ITEM PART NO. QTY. DESCRIPTION
1 6030445 1 Pump Bracket
2 2901494 5 Flat Washer, M6
3 2900302 1 Lock Nut, M6-1.0 Nylon Insert
4 2900303 2 Lock Nut, M8-1.25 Nylon Insert
5 2901583 6 M8 Washer (18mm OD)
6 2900360 2 Cap Screw, Hex Hd., M8-1.25 x 25mm
7 2900341 4 Cap Screw, Hex Hd., M6-1.0 x 16mm
8 2900765 3 Lock Washer, M6 Split
9 6051156 1 Water Pump Belt Guard Brace
10 6030446 1 Belt Guard for Pump
11 2900763 2 Lock Washer, M8 Split
12 6030399 1 Water pump belt guard bracket
7
8
7
Note: Refer to specific engine assembly for cap screw part number and description.
Page 40
EQUIPMENT AND PARTS
WARRANTY
Diamond Products warrants all equipment manufactured by it against defects
in workmanship or materials for a period of one (1) year from the date of
shipment to Customer.
The responsibility of Diamond Products under this Warranty is limited to
replacement or repair of defective parts at Diamond Products’ Elyria, Ohio
factory, or at a point designated by it, of such parts as shall appear to us upon
inspection at such parts, to have been defective in material or workmanship,
with expense for transportation and labor borne by Customer.
In no event shall Diamond Products be liable for consequential or
incidental damages arising out of the failure of any Product to operate properly.
Integral units such as engines, electric motors, batteries, transmissions,
etc., are excluded from this Warranty and are subject to the prime
manufacturer’s warranty.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY
DISCLAIMED.
Loading...