Page 1
DUAL HEAD
FLOOR GRINDER
PARTS LIST
MODEL
CC200
FEBRUARY 2014
Part #1800540
Page 2
Page 3
Table of Contents
Description Page No.
Frame Assembly………………………………………………………..…4 - 5
Disc Assembly………………...………………………………………..…6
Flange Assembly…………..………………………………………………7
Engine Group, 10 HP HondaGas……….…………………………………8
Gear and Shaft Assembly….………………………………………………9
Gas Tank Assembly…………….…….…………………………………..10
Note Page…………………………………………………………………11
Electric Motor Group, 2 HP, 1 Phase…………………………………..… 12
Electric Motor Group, 7.5 HP, 230V, 1 Ph……....……………….………13
Electric Motor Group, 7.5 HP, 230V, 3 Ph……....……………….………14
Electric Motor Group, 7.5 HP, 460V, 3 Ph……....……………….………15
Starter Box Assembly, 7.5 HP, 230V, 1 Phase …..………………………16
Starter Box Assembly, 7.5 HP, 230V, 3 Phase …..………………………17
Starter Box Assembly, 7.5 HP, 460V, 3 Phase …..………………………19
Starter Box, 230V…………………………………………………..…..…20
Starter Box, 460V…………………………………………………..…..…21
Starter Box, 230V…………………………………………………..…..…22
Starter Box, 460V…………………………………………………..…..…24
Floor Grinder Accessories……………………………………………...…26
Warranty………………..…………………………………………Rear Cover
Quick Reference Service Filters/ Belts
DP Part No. Description Manufacturer’s Part No.
2703150 Fuel Filter for Honda (Honda #17676-ZE2-W01)
2702121 Air Filter for 13HP Honda (Honda #17211-ZF5-V01)
2501162 V-Belt (2) for Honda 13HP Gas (Gates #4L-400)
2500033 V-Belt (3) for Baldor 2HP, 1PH (Gates #4L-430)
2500632 V-Belt (3) for Baldor 7.5HP, 3PH (Gates #4L-410)
Page 4
6041162: CC200 FRAME ASSEMBLY
4
35
47
12 10
6
40
46
46
28
29
4841
22
7
11
24
42
37
36
38
39
41
40
31
34
32
3233
1
43
C
711
45
17
44
30
19
24
11
7
23
25
2627
DETAIL C
SCALE 1 : 2
21
ADJUST PINS
TO LEVEL FRAME
11
A
7
B
8
9
AT COVER PL ATE
3 4
24
20
18
16
7
7
5
2
FRONT AND
REAR GUARDS
DETAIL B
SCALE 1 : 4
13
DETAIL A
SCALE 1 : 4
15
14
Page 5
6041162: CC200 FRAME ASSEMBLY
ITEM NO. PART NUMBER QTY. DESCRIPTION
1 6041032 1 Frame Weldment
2 2501063 3 Bearing, 4 Bolt Flange, 1" ID
3 2900960 12 Cap Screw, Flat Hd., 7/16-14 x 1-1/2"
4 2900045 12 Lock Nut, 7/16-14 Nylon
5 6041055 2 Bearing Cover
6 6041158 1 Gear Box Assembly
7 2900022 25 Flat Washer, 5/16" SAE
8 2900030 5 Cap Screw, Hex Hd., 5/16-18 x 2"
9 2900039 5 Lock Nut, 5/16-18 Nylon
10 6041161 1 Cover Plate Assembly
11 2900031 15 Lock Washer, 5/16" Split
12 2900958 2 Cap Screw, Hex Hd., 5/16-18 x 1/2"
13 2501869 2 Flex Coupling
14 2900693 4 Cap Screw, Hex Hd., 1/2-13 x 3"
15 2900026 4 Lock Nut, 1/2-13 Nylon
16 6041156 1 Axle Weldment
17 6041020 1 Axle Support Shaft
18 2500009 2 Set Collar, 1" ID
19 2503604 2 Wheel, 10 x 3 x 3/4"
20 2400615 2 Set Collar, 3/4"
21 2900698 4 1/2 x 1.2" Quick Pin
22 6011089 1 Key, 1/4" Sq. x 1" Long
23 6041035 1 Guard Retainer
24 2900019 13 Cap Screw, Hex Hd., 5/16-18 x 3/4"
25 6041036 1 Guard, Rear
26 2900947 2 Cap Screw, Soc. Hd., 5/16-18 x 2"
27 2900141 2 Hex Nut, 5/16-18
28 6041051 1 Weight Box
29 2501047 1 Weight
30 6041063 1 Dust Port Bracket
31 6041056 2 Handle Support
32 2900014 8 Flat Washer, 3/8" SAE
33 2900596 4 Cap Screw, Hex Hd., 3/8-16 x 2-1/2"
34 2900018 4 Lock Nut, 3/8-16 Nylon
35 6041023 1 Handle Weldment
36 3200008 2 Close Nipple, 1/2" NPT
37 3200022 1 Fitting, 1/2" F. Pipe to 3/4" F. Garden
38 3200027 1 Water Valve
39 3200155 1 Fitting, 1/2" M. Pipe to 3/4" M. Garden
40 2900257 2 Lock Pin, T Handle, 3/8"
41 2900053 4 Rivet, 3/32" Dia.
42 6040299 1 Water Hose Assembly
43 2503177 1 Hose Reducer, 2.0"-1.5" ID
44 3200095 1 Hose Clamp #32
45 6041065 1 Hose, 2" ID, PVC
46 1800001 2 Warning Label
47 1800506 2 Core Cut Decal
48 1800169 1 Serial Number Plate, US
Page 6
CC200 DISC ASSEMBLY: 6041160
6
7
1
9
4
8
2
5
3
6
10
ITEM NO.
1
2
3
4
5
6
7
8
9
10
PART NUMBER
6041057
6041058
2900705
CCB4000
GB4000
ABCH
2900026
2900014
2900060
WEDGE
QTY.
DESCRIPTION
1 Disc, Right Side
1 Disc, Left Side
4 Cap Screw, Flat Hd., 1/2-13 x 3-1/2"
2 Carbide Cutting Block
2
Grinding Block
2 Abrasive Grinding Stone
4
Lock Nut, 1/2-13 Nylon
6 Flat Washer, 3/8" SAE
6 Cap Screw, Hex Hd., 3/8-16 x 2"
2 Wooden Wedge
ITEMS 4,5,6 AND 10 SHOWN AS REFERENCE.
Page 7
CC200 FLANGE ASSEMBLY: 6041159
7
5
1
4
3
2
6
ITEM NO.
1
2
3
4
5
6
SHOWN AS REFERENCE,
USE 10" OR 12" GRINDING HEADS
GSH, GHH, GSP, OR GHP.
PART NUMBER
6041157
2900705
2900014
2900697
2900026
GHH1020
ITEM 6 SHOWN AS REFERENCE.
QTY. DESCRIPTION
2 Disc Flange
4 Cap Screw, Flat Hd., 1/2-13 x 3-1/2"
8 Flat Washer, 3/8" SAE
8 Cap Screw, Hex Hd., 3/8-24 x 5/8"
4 Lock Nut, 1/2-13 Nylon
2 Grinding Head, 10"
Page 8
21
8
18
6040543 CC200 HONDA ENGINE GROUP, 10 HP
DETAIL B
SCALE 1 : 4
22
2
TO VENT PORT
@ AIR FILTER
19
8
10
15
SHOWN AS
REFERENCE
23
1
9
20
9
4
4
5
16
7 4
DETAIL A
5
3
13
14
6
11
12
SCALE 1 : 4
17
ITEM PART NO. QTY. DESCRIPTION
1 6048335 1
29009453
4 2900022 6 Flat Washer, 5/16" SAE
5 2900031 4 Lock Washer, 5/16" Split
6 2900946 2 Hex Nut, 5/16-24
7 2900944 2 Cap Screw, Hex Hd., 5/16-24 x 2"
8 2501044 1 Bushing, Taper Lock, w/Fasteners
2900138 3 Cap Screw, Hex Hd., 5/16-18 x 1"
9 2501357 2 Key, 1/4" Sq., x 2.0"
10 2501178 1 Sheave, 6.00-2 Groove
11 2501161 1
12 6041081 1 Clutch Spacer
13 2900966 1 Flat Washer, 1/2" x 2" x 1/8"
14 2900965 1 Cap Screw, Hex Hd., 7/16-20 x 3-1/2"
15 2501162 2 V-Belt, 4L400
16 6017351 1 Gas Tank Assy., CC100/200
Engine Plate
Honda GXV390, Vertical Shaft126002592
2 Cap Screw, Hex Hd., 5/16-24 x 1-1/2"
Centrifugal Clutch W/ 2 Groove
Pulley, 4.0"
ITEM PART NO. QTY. DESCRIPTION
17 6041121 1 Oil Drain Hose Assembly
3200462 1 Fitting, M20 x 1.5 to 5/8" M. JIC
3200440 1 Fitting. 5/8" F. to 1/2" M. JIC
3200181 1 Fitting, 1/2" F. JIC to 1/2" Pushlok
6010435 1 Hose, 1/2" I.D. x 3"
3200163 1 Fitting, 1/2" F. Pipe to 1/2" Push Lock
3200160 1 Plug, 1/2-14 NPT
18 2501046 1 Throttle Cable Assembly
19 6041062 2 Throttle Spacer
20 6013200 1 3/16 x 19" Fuel LIne W/ Clamps
3200062 2 Hose Clamp #4
21 2900597 2 Cap Screw, Hex Hd., M5-0.8 x 50mm
22 2900926 2 Flat Washer, M5
23 2900301 2 Lock Nut, M5-0.8 Nylon Insert
24 6041032 1 Frame Weldment
25 6041056 2 Handle Support
26 6041023 1 Handle Weldment
Page 9
CC200 GEAR AND SHAFT ASSEMBLY: 6041158
9
1
5
4
8
6
2
3
7
9
ITEM NO. PART NUMBER QTY. DESCRIPTION
1 6041034 1 Head Plate
2 2501063 3 Bearing, 4 Bolt Flange, 1" ID
3 2900044 12 Carriage Bolt, 7/16-14 x 1-1/4"
4 2900045 12 Lock Nut, 7/16-14 Nylon
5 6041155 2 Gear Shaft Assembly
6 6010169 2 Key, 1/4" Sq. x 1-1/4"
7 6041143 1 Gear-Shaft Assembly
8 2503589 2 Spur Gear, 156 Tooth, 20 Deg.
9 2900923 2 Set Screw, Soc. Hd., 5/16-18 x 1"
Page 10
6017351 CC100/200 GAS TANK ASSEMBLY
10
4
2
3
5
12
9
8
10
11
8
TO FUEL
8
FILTER
13
1
7
6
ITEM PART NO. QTY. DESCRIPTION
1 6041046 1 Gas Tank Support
2 6010846 1 Fuel Tank, 1.5 Gallon
3 2506716 1 Grommet
4 2502484 1 Roll Over Vent, 1/4" Hose Barb
5 2506718 1 Fuel Tank Cap, 1-3/4"
6 3200057 1 Elbow, 1/4" M. Pipe to 1/4" M. JIC
7 6011718 1 Hose Assy., Fuel, 1/4"
3200091 1 Fitting, 1/4" F. JIC to 1/4" Push Lock
3200062 2 Hose Clamp #4
8 2900022 10 Flat Washer, 5/16" SAE
9 2900031 2 Lock Washer, 5/16" Split
10 2900329 2 Cap Screw, Hex Hd., M8-1.25 x 20mm
11 2900494 4 Cap Screw, Hex Hd., 5/16-18 x 2"
12 2900039 4 Lock Nut, 5/16-18 Nylon
13 1801716 1 Decal, EPA EVAP Standard
Page 11
NOTES
11
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
Page 12
12
Page 13
6030264 ELECTRIC MOTOR GROUP, 7-1/2 HP, 230V, 1 Ph
13
18
2
14
17
16
15
20
21
35
19
1
12
11
10
SHOWN AS
REFERENCE
7
3
4
6
13
8
9
22
ITEM PART NO. QTY. DESCRIPTION
1 6048335 1 Motor Adapter Plate
2 2600119 1
3 2900014 8 Flat Washer, 3/8" SAE
4 2900006 4 Lock Washer, 3/8" Split
5 2900013 4
6 2900033 4 Hex Nut, 3/8-16
7 2900530 4 Cap Screw, Flat Hd., 1/2-13 x 1"
2500370B
Electric Motor, 7-1/2 HP, 230V, 1
Ph, C-Face
Cap Screw, Hex Hd., 3/8-16 x 11/4"
Sheave, 4.00-3 Groove125010578
Bushing, Taper Lock, 1-3/8" Bore125003709
Key, 3/8 x 5/16 x 3/4"1
Cap Screw, Hex Hd., 5/16-18 x 1"3 2900138
Sheave, 6.00-3 Groove1250104310
ITEM PART NO. QTY. DESCRIPTION
11 2501044 1
2900138 3 Cap Screw, Hex Hd., 5/16-18 x 1"
2501044B 1 Key, 3/8 x 5/16 x 3/4"
12 6048134 1 Key, 1/4" Sq. x 2-1/4"
13 6048046 1 Key, 5/16" Sq. x 1-1/2"
14 6041154 1 Bracket, Electric Box
15 2900022 8 Flat Washer, 5/16" SAE
16 2900494 4 Cap Screw, Hex Hd., 5/16-18 x 2"
17 2900039 4 Lock Nut, 5/16-18 Nylon
18 6048506 1
19 2900144 4
20 2900009 4 Flat Washer, 1/4" SAE
21 2900024 4 Lock Washer, 1/4" Split
22 2501162 3 V-Belt, 4L400
Bushing, Taper Lock, 1" Bore,
w/Fasteners
Starter Box Assy., 220-240V,
1PH.
Cap Screw, Hex Hd., 1/4-20 x
3/4"
Page 14
6030397 ELECTRIC MOTOR GROUP, 7-1/2 HP, 230V
14
18
2
14
17
16
15
20
21
35
19
1
12
11
10
SHOWN AS
REFERENCE
7
3
4
6
13
8
9
22
ITEM PART NO. QTY. DESCRIPTION
1 6048335 1 Motor Adapter Plate
2 2600128 1
3 2900014 8 Flat Washer, 3/8" SAE
4 2900006 4 Lock Washer, 3/8" Split
5 2900013 4
6 2900033 4 Hex Nut, 3/8-16
7 2900530 4 Cap Screw, Flat Hd., 1/2-13 x 1"
8 2501057
Electric Motor, 7-1/2 HP, 3 Ph, CFace
Cap Screw, Hex Hd., 3/8-16 x 11/4"
Sheave, 4.00-3 Groove1
Bushing, Taper Lock, 1-3/8" Bore125003709
1 2500370B
Key, 3/8 x 5/16 x 3/4"
Cap Screw, Hex Hd., 5/16-18 x 1"3 2900138
Sheave, 6.00-3 Groove1250104310
ITEM PART NO. QTY. DESCRIPTION
11 2501044 1
2900138 3 Cap Screw, Hex Hd., 5/16-18 x 1"
2501044B 1 Key, 3/8 x 5/16 x 3/4"
12 6048134 1 Key, 1/4" Sq. x 2-1/4"
13 6048046 1 Key, 5/16" Sq. x 1-1/2"
14 6041154 1 Bracket, Electric Box
15 2900022 8 Flat Washer, 5/16" SAE
16 2900494 4 Cap Screw, Hex Hd., 5/16-18 x 2"
17 2900039 4 Lock Nut, 5/16-18 Nylon
18 4645261 1 Starter Box Assy., 220-240V
19 2900144 4
20 2900009 4 Flat Washer, 1/4" SAE
21 2900024 4 Lock Washer, 1/4" Split
22 2501162 3 V-Belt, 4L400
Bushing, Taper Lock, 1" Bore,
w/Fasteners
Cap Screw, Hex Hd., 1/4-20 x
3/4"
Page 15
6030450 ELECTRIC MOTOR GROUP, 7-1/2 HP, 460V
15
18
2
14
17
16
15
20
21
35
19
1
12
11
10
SHOWN AS
REFERENCE
7
3
4
6
13
8
9
22
ITEM PART NO. QTY. DESCRIPTION
1 6048335 1 Motor Adapter Plate
2 2600128 1
3 2900014 8 Flat Washer, 3/8" SAE
4 2900006 4 Lock Washer, 3/8" Split
5 2900013 4
6 2900033 4 Hex Nut, 3/8-16
7 2900530 4 Cap Screw, Flat Hd., 1/2-13 x 1"
8 2501057 1 Sheave, 4.00-3 Groove
9 2500370 1 Bushing, Taper Lock, 1-3/8" Bore
2500370B 1
Electric Motor, 7-1/2 HP, 3 Ph, CFace
Cap Screw, Hex Hd., 3/8-16 x 11/4"
Key, 3/8 x 5/16 x 3/4"
Cap Screw, Hex Hd., 5/16-18 x 1"3 2900138
Sheave, 6.00-3 Groove1250104310
ITEM PART NO. QTY. DESCRIPTION
11 2501044 1
2900138 3 Cap Screw, Hex Hd., 5/16-18 x 1"
2501044B 1 Key, 3/8 x 5/16 x 3/4"
12 6048134 1 Key, 1/4" Sq. x 2-1/4"
13 6048046 1 Key, 5/16" Sq. x 1-1/2"
14 6041154 1 Bracket, Electric Box
15 2900022 8 Flat Washer, 5/16" SAE
16 2900494 4 Cap Screw, Hex Hd., 5/16-18 x 2"
17 2900039 4 Lock Nut, 5/16-18 Nylon
18 4645262 1 Starter Box Assy., 415-480V
19 2900144 4
20 2900009 4 Flat Washer, 1/4" SAE
21 2900024 4 Lock Washer, 1/4" Split
22 2501162 3 V-Belt, 4L400
Bushing, Taper Lock, 1" Bore,
w/Fasteners
Cap Screw, Hex Hd., 1/4-20 x
3/4"
Page 16
6048506 STARTER BOX ASSEMBLY, 220-240 VOLT, 1 PH
16
HOLE FOR
CUSTOMER SUPPLIED
POWER CORD.
TO STARTER BOX
OVERLOAD RELAY
AND GROUND LUG
5
6
7
GREEN TO
1
GROUND LUG
ITEM PART NO. QTY. DESCRIPTION
1 4600272 1 Starter Box, 220-240 Volt
2 2802052 1 Cord Connector, 3/4" Thd., .63-75" Cord, 90 Deg.
3 2801304 1 Lock Nut, 3/4"
4 6040647 1 Cable Assy., 10 Ga., 3 Wire x 53"
5 1800810/11 1 Voltage Label, 230/460V
6 1801638 1 Decal, Start
7 1801639 1 Decal, Stop
2
3
4
TO MOTOR
Page 17
4645261 STARTER BOX ASSEMBLY, 220-240 VOLT
17
HOLE FOR
CUSTOMER SUPPLIED
POWER CORD.
TO STARTER BOX
OVERLOAD RELAY
AND GROUND LUG
5
6
7
GREEN TO
1
GROUND LUG
ITEM PART NO. QTY. DESCRIPTION
1 4600272 1 Starter Box, 220-240 Volt
2 2802052 1 Cord Connector, 3/4" Thd., .63-75" Cord, 90 Deg.
3 2801304 1 Lock Nut, 3/4"
4 6040649 1 Cable Assy., 12 Ga., 4 Wire x 53"
5 1800810/11 1 Voltage Label, 230/460V
6 1801638 1 Decal, Start
7 1801639 1 Decal, Stop
2
3
4
TO MOTOR
Page 18
NOTES
18
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
Page 19
4645262 STARTER BOX ASSEMBLY, 415-480 VOLT
19
TO STARTER BOX
OVERLOAD RELAY
AND GROUND LUG
HOLE FOR
CUSTOMER SUPPLIED
PLUG.
GREEN TO
GROUND LUG
5
6
7
1
2
3
4
ITEM PART NO. QTY. DESCRIPTION
1 4600273 1 Starter Box, 415-480 Volt
2 2802052 1 Cord Connector, 3/4" Thd., .63-75" Cord, 90 Deg.
3 2801304 1 Lock Nut, 3/4"
4 6040649 1 Cable Assy., 12 Ga., 4 Wire x 53"
5 1800811 1 Voltage Label, 460V
6 1801638 1 Decal, Start
7 1801639 1 Decal, Stop
TO MOTOR
Page 20
REPLACE BASE
20
WITH 6040300D
AND INSERTS
4600272 STARTER BOX, 220-240 VOLT
1
2
3
ITEM PART NO. QTY. DESCRIPTION
1 2801032 1 Starter Box, 220-240V
2 6040300D 1 Starter Box Base
3 2901332 4 1/4-20 Threaded Insert
Page 21
REPLACE BASE
21
WITH 6040300D
AND INSERTS
4600273 STARTER BOX, 415-480 VOLT
1
2
3
ITEM PART NO. QTY. DESCRIPTION
1 2801031 1 Starter Box, 415-480V
2 6040300D 1 Starter Box Base
3 2901332 4 1/4-20 Threaded Insert
Page 22
2801032 STARTER BOX, 220-240 VOLT
22
12
5
12
14
6
13
15
13
4
7
8
11
10
3
1
16
17
18
4
9
2
19
20
21
Page 23
4600295
23
SET TO
MOTOR AMP
RATING
5
2801032 STARTER BOX, 220-240 VOLT
12
4600297
4600298
13
TRIP CLASS - 10
RESET - A
PHASE - OFF
4
4600294
ITEM
PART
NO.
1 2702419 1 Electrical Box (Base)
2 6040598 1 Sub-plate
3 2900676 4
4 2801704 1 Contactor, 220-240V (includes coil)
2801265 1 Replacement Coil, 220-240V
5 2801699 1 Overload Relay, 9-45 AMP
6 2801676 1 Auxilary Contacts, 1NO-NC
7 2901827 4 Cap Screw, Soc. Hd., #8-32 x 5/8"
8 2901437 4 Flat Washer, #10
9 2800315 2 Grounding Lug
10 2900024 1 Lock Washer, 1/4" Split
QTY. DESCRIPTION
Machine Screw, Pan Hd., M4-0.7 x
8mm
N.O. ONLY
4600293
4600296
ITEM
PART
NO.
11 2901891 1 Cap Screw, Hex Hd., 1/4-28 x 1/2"
12 2801636 1 E-Stop Switch, 600V
13 2801639 1 Pushbutton, N.O., 600V
14 2701414 4 Fastener, Electrical Box Top
15 6048296 1 Electric Box Cover, 2 Hole
16 4600293 1 Wire, 14 Gage, Yellow, 15"
17 4600294 1 Wire, 14 Gage, Yellow, 6"
18 4600295 1 Wire, 14 Gage, Black, 6"
19 4600296 1 Wire, 14 Gage, Black, 15"
20 4600297 1 Wire, 14 Gage, Red, 12"
21 4600298 2 Wire, 14 Gage, Red, 13"
QTY. DESCRIPTION
Page 24
2801031 STARTER BOX, 415-480 VOLT
24
12
13
12
15
14
5
13
4
6
8
11
7
10
3
1
16
17
18
19
20
4
9
2
21
Page 25
4600295
25
SET TO
MOTOR AMP
RATING
2801031 STARTER BOX, 415-480 VOLT
12
13
4600297
5
TRIP CLASS - 10
RESET - A
PHASE - OFF
4
4600294
ITEM
PART
NO.
1 2702419 1 Electrical Box (Base)
2 6040598 1 Sub-plate
3 2900676 4
4 2801707 1 Contactor, 415-480V (Includes Coil)
2801266 1 Replacement Coil, 415-480V
5 2801699 1 Overload Relay, 9-45 AMP
6 2801676 1 Auxilary Contacts, 1NO-NC
7 2901437 4 Flat Washer, #10
8 2901827 4 Cap Screw, Soc. Hd., #8-32 x 5/8"
9 2800315 2 Grounding Lug
10 2900024 1 Lock Washer, 1/4" Split
QTY. DESCRIPTION
Machine Screw, Pan Hd., M4-0.7 x
8mm
N.O. ONLY
4600298
4600293
4600296
ITEM
PART
NO.
11 2901891 1 Cap Screw, Hex Hd., 1/4-28 x 1/2"
12 2801636 1 E-Stop Switch, 600V
13 2801639 1 Pushbutton, N.O., 600V
14 6048296 1 Electric Box Cover, 2 Hole
15 2701414 4 Fastener, Electrical Box Top
16 4600293 1 Wire, 14 Gage, Yellow, 15"
17 4600294 1 Wire, 14 Gage, Yellow, 6"
18 4600295 1 Wire, 14 Gage, Black, 6"
19 4600296 1 Wire, 14 Gage, Black, 15"
20 4600297 1 Wire, 14 Gage, Red, 12"
21 4600298 2 Wire, 14 Gage, Red, 13"
QTY. DESCRIPTION
Page 26
FLOOR GRINDER ACCESSORIES
26
FLOOR GRINDING HEADS – HEAVY DUTY ORANGE
SIZE – No. of
Segments
10” Head,
12 Seg.
10” Head,
12 Seg.
12” Head,
24 Seg.
Hard Non-Abrasive
Material Cat. No.
11393 23592
11401 11398
39534 38541
Soft Abrasive
Material Cat. No.
FLOOR GRINDING HEADS – PREMIUM BLACK
SIZE – No. of
Segments
10” Head,
12 Seg.
12” Head,
12 Seg.
10” Head,
24 Seg.
12” Head,
24 Seg.
Hard Non-Abrasive
Material Cat. No.
11406 20198
41193 41194
23823 11410
39164 40051
Soft Abrasive
Material Cat. No.
GRINDING BLOCKS*
Part No. Application Specs.
GB4000 General Purpose GB50
GB4000 Abrasive Concrete GB60
GB4000 Epoxy Mortars GB64
Terrazzo Grinding
GB4000 60 Grit GT60
GB4000 80 Grit GT80
GB4000 120 Grit GT120
*Designed for use with Dual Head Floor Grinders.
Sold in sets of six.
ABRASIVE GRINDING STONES
Size/Grit Cat. No.
Course 2” x 2” x 4” 35067
Medium 2” x 2” x 4” 35063
Fine 2” x 2” x 4” 35066
Wooden Wedges 4” x 3/4” x 3/16 WEDGES
Application: ABGS – Heavy Duty Grade. For removal and
grinding on concrete, stone, terrazzo, and brick.
CARBIDE CUTTING BLOCKS*
Part No. Description
CCB4000 Carbide Cutting Block
CCBI4000 Carbide Cutting Insert
* For use with Dual Head Floor Grinders
Page 27
NOTES
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
Page 28
EQUIPMENT AND PARTS
WARRANTY
Diamond Products warrants all equipment manufactured by it against defects
in workmanship or materials for a period of one (1) year from the date of
shipment to Customer.
The responsibility of Diamond Products under this Warranty is limited to
replacement or repair of defective parts at Diamond Products’ Elyria, Ohio
factory, or at a point designated by it, of such parts as shall appear to us upon
inspection at such parts, to have been defective in material or workmanship,
with expense for transportation and labor borne by Customer.
In no event shall Diamond Products be liable for consequential or
incidental damages arising out of the failure of any Product to operate properly.
Integral units such as engines, electric motors, batteries, transmissions,
etc., are excluded from this Warranty and are subject to the prime
manufacturer’s warranty.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY
DISCLAIMED.
333 Prospect Street, Elyria, Ohio 44035
(440) 323-4616 (800) 321-5336 Fax (440) 323-8689
www.diamondproducts.com
Printed in U.S.A. #1800540
Loading...