SINGLE HEAD
FLOOR GRINDER
PARTS LIST
MODEL
CC100
FEBRUARY 2014
Part #1800502
Table of Contents
Description Page No.
Recommended Power Cords……………………………………………2
Frame Assembly………………………………………………….…….4-5
Shaft and Flex Coupling…………………………………………….……6
Gas Engine Group, 10 HP Honda………………………………….……..7
Gas Tank Assembly…………………………………………….………...8
Hydraulic Motor Group ……………………………………….….………9
Electric Motor Group, 2 HP.………………………....………………......10
Electric Motor Group, 7.5 HP 1 Phase, 230V ………....…………….…...11
Electric Motor Group, 7.5 HP 3 Phase, 230V ………....…………….…...12
Electric Motor Group, 7.5 HP 3 Phase, 460V ………....…………….…...13
Starter Box Assembly, 7.5 HP, 1 Phase, 230V…………………..…….… 14
Starter Box Assembly, 7.5 HP, 3 Phase, 230V…..………………….....… 15
Starter Box Assembly, 7.5 HP, 3 Phase, 460V.,……………….…….…... 16
Starter Box, 230V………………………………………………………….18
Starter Box, 460V, ………………………………………………………...19
Starter Box, 230V………………………………………………………….20
Starter Box, 460V, ………………………………………………………...22
Warranty………………..……………………………………….Rear Cover
Quick Reference Service Filters/ Belts
DP Part No. Description Manufacturer’s Part No.
2703150 Fuel Filter for Honda (Honda #17676-ZE2-W01)
2702121 Air Filter for 13HP Honda (Honda #17211-ZF5-V01)
2704186 Air Filter for 9HP Briggs (Briggs # 698413)
2500032 V-Belt (3) for Honda 13HP& Briggs 9HP Gas (Gates #4L-390)
2500032 V-Belt (2) for Baldor 2HP, 1PH (Gates #4L-390)
2500032 V-Belt (3) for Baldor 7.5HP, 3PH (Gates #4L-390)
6041113: CC100 FRAME ASSEMBLY
4
29
41
47
31
33
32
14
13
13
14
50
44
5131
48
30
31
34
36
DETAIL A
SCALE 1 : 4
43
49
22
13
24 26
46
45
4
38
35
27
28
23
25
42
20 19
37
3
18
17
21
2
8
2
9
7
6
14
13
16
15
24
10
11
ROUTE WATER &
VACUUM LINES
12
THRU HOLES.
39
5
40
DETAIL C
SCALE 1 : 4
6041113: CC100 FRAME ASSEMBLY
DETAIL D
SCALE 1 : 4
4
2
1
ITEM PART NO. QTY.
6041033 1 Frame Base Weldment
1
2 6041047 1 Leg Weldment
3 2900948 2 Retainer, 1/2"
4 2501040 2 Spring, 3/4 x 2-3/4", Extension
5 6041048 1 Foot Pedal Weldment
6 2900139 3
7 2900037 2 Hex Nut, 1/2-13
8 6041049 1 Axle Shaft Weldment
9 2900295 2 Flat Washer, 1" SAE
10 2501039 2 Wheel, 12 x 3 x 1"
11 2500009 2 Set Collar, 1" ID
12 6041026 1 Splashguard, 7 x 11"
13 2900022 15 Flat Washer, 5/16" SAE
14 2900138 9
15 6041138 1 Flanged Hub W/ 1/8 Grease Port
16 3200179 1 Pipe Nipple, 1/8" NPT x 3"
17 3200388 1 1/8" Pipe Coupling
18 2900062 1 Grease Fitting, 1/8" NPT
19 2900058 4 Flat Washer, 1/2" SAE
20 2900949 4 Lug Nut, 1/2-20
21 6041146 1 CC100 Shaft/Coupling Assy.
22 6041056 2 Handle Support
23 6041063 1 Dust Port Bracket
24 2900014 8 Flat Washer, 3/8" SAE
25 2900596 4
26 2900018 4 Lock Nut, 3/8-16 Nylon
Cap Screw, Hex Hd., 1/2-13 x 13/4"
Cap Screw, Hex Hd., 5/16-18 x
1"
Cap Screw, Hex Hd., 3/8-16 x 21/2"
DESCRIPTION
6
38
5
DETAIL B
SCALE 1 : 4
ITEM PART NO. QTY. DESCRIPTION
27 2503177 1 Hose Reducer, 2.0"-1.5" ID
28 3200095 1 Hose Clamp #32
29 6041023 1 Handle Weldment
30 2900257 2 Lock Pin, T Handle, 3/8"
31 2900053 4 Rivet, 3/32" Dia.
32 3200008 2 Close Nipple, 1/2" NPT
33 3200022 1
34 3200027 1 Water Valve
35 3200155 1
36 6040299 1 Water Hose Assembly
37 6040595 1 Dust Hose, 2" ID x 27", PVC
38 2800278 2 Wire Tie, 14"
39 2900947 2
40 2900141 2 Hex Nut, 5/16-18
41 6041022 1 Weight Box
42 6041027 1 Splash Guard, 6-1/2 x 32"
43 6041038 3 Guard Clasp, 4.275"
44 6041039 1 Guard Clasp, 7.75"
45 6041052 1 Guard Clasp, 7.75"
46 2900217 6
47 2501047 1 Weight
48 1800001 2 Warning Label
49 1800506 2 Core Cut Decal
50 1800504 1 Label, Grease Often
51 1800169 1 Serial Number Plate, US
Fitting, 1/2" F. Pipe to 3/4" F.
Garden
Fitting, 1/2" M. Pipe to 3/4" M.
Garden
Cap Screw, Soc. Hd., 5/16-18 x
2"
Cap Screw, Hex Hd., 5/16-18 x
1-1/4"
5
6041146: CC100 SHAFT AND FLEX COUPLING
6
1
5
2
3
6
ITEM
NO.
PART NUMBER QTY. DESCRIPTION
1 6041171 1 Blade Shaft Weldment
2 6041173 1 Flex Coupling
3 6041172 1 Disc Flange
4 2903061 2 Capscrew, Hex Hd., 7/16-14 x 2-1/2"
5 2900045 4 Lock Nut, 7/16-14 Nylon
6 2901072 2 Flat Hd., Soc., Hd., 7/16-14 x 2-3/4"
7 2900014 4 Flat Washer, 3/8" SAE
8 2900954 4 Cap Screw, Hex Hd., 3/8-24 x 7/8"
7 8
4
20
7
6010483 CC100 HONDA ENGINE GROUP, 10HP
19
DETAIL B
SCALE 1 : 4
2
18
10
14
11
SHOWN AS
REFERENCE
21
22
1
9
8
13
4
5
3
8
12
4
5
6
17
DETAIL A
SCALE 1 : 4
15
47
16
DESCRIPTIONQTY.ITEM PART NO.
1 6048335 1 Engine Plate
2 2600259 1 Honda GXV390, Vertical Shaft
3 2900945 2 Cap Screw, Hex Hd., 5/16-24 x 1-1/2"
4 2900022 6 Flat Washer, 5/16" SAE
5 2900031 4 Lock Washer, 5/16" Split
6 2900946 2 Hex Nut, 5/16-24
7 2900944 2 Cap Screw, Hex Hd., 5/16-24 x 2"
8 2501044 2 Bushing, Taper Lock, w/Fasteners
2900138 3 Cap Screw, Hex Hd., 5/16-18 x 1"
9 2501357 1 Key, 1/4" Sq., x 2.0"
10 2501043 1 Sheave, 3 Groove
11 6041042 1 Spacer, Blade Shaft
12 2501045 1 Sheave, 3.00 - 3 Groove
13 6048134 1 Key, 1/4" Sq. x 2-1/4"
14 2500032 3 V-Belt 4L-390
15 6017351 1 Gas Tank Assy., CC100/200
ITEM PART NO. QTY. DESCRIPTION
16 6041121 1 Oil Drain Hose Assembly
3200462 1 Fitting, M20 x 1.5 to 5/8" M. JIC
3200440 1 Fitting. 5/8" F. to 1/2" M. JIC
3200181 1 Fitting, 1/2" F. JIC to 1/2" Pushlok
6010435 1 Hose, 1/2" I.D. x 3"
3200163 1 Fitting, 1/2" F. Pipe to 1/2" Push Lock
3200160 1 Plug, 1/2-14 NPT
17 6013200 1 1/4 x 19" Fuel LIne W/ Clamps
3200062 2 Hose Clamp #4
18 6041062 2 Throttle Spacer
19 2501046 1 Throttle Cable Assembly
20 2900597 2 Cap Screw, Hex Hd., M5-0.8 x 50mm
21 2900926 2 Flat Washer, M5
22 2900301 2 Lock Nut, M5-0.8 Nylon Insert
23 6041033 1 Frame Base Weldment
24 6041056 2 Handle Support
25 6041023 1 Handle Weldment
6017351 CC100/200 GAS TANK ASSEMBLY
8
4
2
3
5
12
9
8
10
11
8
TO FUEL
8
FILTER
13
1
7
6
ITEM PART NO. QTY. DESCRIPTION
1 6041046 1 Gas Tank Support
2 6010846 1 Fuel Tank, 1.5 Gallon
3 2506716 1 Grommet
4 2502484 1 Roll Over Vent, 1/4" Hose Barb
5 2506718 1 Fuel Tank Cap, 1-3/4"
6 3200057 1 Elbow, 1/4" M. Pipe to 1/4" M. JIC
7 6011718 1 Hose Assy., Fuel, 1/4"
3200091 1 Fitting, 1/4" F. JIC to 1/4" Push Lock
3200062 2 Hose Clamp #4
8 2900022 10 Flat Washer, 5/16" SAE
9 2900031 2 Lock Washer, 5/16" Split
10 2900329 2 Cap Screw, Hex Hd., M8-1.25 x 20mm
11 2900494 4 Cap Screw, Hex Hd., 5/16-18 x 2"
12 2900039 4 Lock Nut, 5/16-18 Nylon
13 1801716 1 Decal, EPA EVAP Standard
9
6030283
10
CC100 ELECTRIC MOTOR,
2HP, 1-PH, 115V
16
12
13
14
15
1
ATTACH TO
HANDLBAR
5
4
2
3
11
10
18
9
ITEM PART NO. QTY. DESCRIPTION
1 2600271 1
2 6041064 1 Engine Plate
3 2900235 4 Cap Screw, Flat Hd., 3/8-16 x 1"
4 2900014 8 Flat Washer, 3/8" SAE
5 2900013 4
6 2900006 4 Lock Washer, 3/8" Split
2HP-1Ph Electric Motor w/
Drilled on/off switch
Cap Screw, Hex Hd., 3/8-16 x 11/4"
Hex Nut, 3/8-16429000337
Key, 3/16" Sq. x 1-1/4"160482298
SHOWN FOR
REFERENCE
4
6
7
8
ITEM PART NO. QTY. DESCRIPTION
9 2501177 1 Sheave, 3.00 - 2 Groove
10 6041001 1 Spacer, Blade Shaft
11 2501178 1 Sheave, 6.00-2 Groove
12 2501044 1
13 2501357 1 Key, 1/4" Sq., x 2.0"
14 6041062 2 Throttle Spacer
15 2900301 2 Lock Nut, M5-0.8 Nylon Insert
16 2900597 2
18 2500032 2 V-Belt 4L-390
Bushing, Taper Lock,
w/Fasteners
Cap Screw, Hex Hd., M5-0.8 x
50mm
6011713 ELECTRIC MOTOR GROUP, 7-1/2 HP, 230V, 1 Ph
11
19
2
15
18
17
16
21
22
20
35
1
13
12
10
SHOWN AS
REFERENCE
7
3
4
8
6
14
9
23
ITEM PART NO. QTY. DESCRIPTION
1 6048335 1 Motor Adapter Plate
2 2600119 1
3 2900014 8 Flat Washer, 3/8" SAE
4 2900006 4 Lock Washer, 3/8" Split
5 2900013 4
6 2900033 4 Hex Nut, 3/8-16
7 2900530 4 Cap Screw, Flat Hd., 1/2-13 x 1"
8 2501045 1 Sheave, 3.00 - 3 Groove
9 2500370 1 Bushing, Taper Lock, 1-3/8" Bore
2500370B 1 Key, 3/8 x 5/16 x 3/4"
2900138
Electric Motor, 7-1/2 HP, 230V, 1
Ph, C-Face
Cap Screw, Hex Hd., 3/8-16 x 11/4"
Cap Screw, Hex Hd., 5/16-18 x 1"3
1250104310
Sheave, 6.00-3 Groove
Spacer, Blade Shaft1604104211
ITEM PART NO. QTY. DESCRIPTION
12 2501044 1
2900138 3 Cap Screw, Hex Hd., 5/16-18 x 1"
2501044B 1 Key, 3/8 x 5/16 x 3/4"
13 2501357 1 Key, 1/4" Sq., x 2.0"
14 6048046 1 Key, 5/16" Sq. x 1-1/2"
15 6041154 1 Bracket, Electric Box
16 2900022 8 Flat Washer, 5/16" SAE
17 2900494 4 Cap Screw, Hex Hd., 5/16-18 x 2"
18 2900039 4 Lock Nut, 5/16-18 Nylon
19 6048506 1
20 2900144 4
21 2900009 4 Flat Washer, 1/4" SAE
22 2900024 4 Lock Washer, 1/4" Split
23 2500032 3 V-Belt 4L-390
Bushing, Taper Lock, 1" Bore,
w/Fasteners
Starter Box Assy., 220-240V,
1PH.
Cap Screw, Hex Hd., 1/4-20 x
3/4"
6011740 ELECTRIC MOTOR GROUP, 7-1/2 HP, 230V
12
19
2
15
18
17
16
21
22
20
35
1
13
12
10
SHOWN AS
REFERENCE
7
3
4
8
6
14
9
23
ITEM PART NO. QTY. DESCRIPTION
1 6048335 1 Motor Adapter Plate
2 2600128 1
3 2900014 8 Flat Washer, 3/8" SAE
4 2900006 4 Lock Washer, 3/8" Split
5 2900013 4
6 2900033 4 Hex Nut, 3/8-16
7 2900530 4 Cap Screw, Flat Hd., 1/2-13 x 1"
8 2501045 1 Sheave, 3.00 - 3 Groove
9 2500370 1 Bushing, Taper Lock, 1-3/8" Bore
2500370B 1 Key, 3/8 x 5/16 x 3/4"
2900138 3 Cap Screw, Hex Hd., 5/16-18 x 1"
Electric Motor, 7-1/2 HP, 3 Ph, CFace
Cap Screw, Hex Hd., 3/8-16 x 11/4"
Sheave, 6.00-3 Groove1250104310
Spacer, Blade Shaft1604104211
ITEM PART NO. QTY. DESCRIPTION
12 2501044 1
2900138 3 Cap Screw, Hex Hd., 5/16-18 x 1"
2501044B 1 Key, 3/8 x 5/16 x 3/4"
13 2501357 1 Key, 1/4" Sq., x 2.0"
14 6048046 1 Key, 5/16" Sq. x 1-1/2"
15 6041154 1 Bracket, Electric Box
16 2900022 8 Flat Washer, 5/16" SAE
17 2900494 4 Cap Screw, Hex Hd., 5/16-18 x 2"
18 2900039 4 Lock Nut, 5/16-18 Nylon
19 4645261 1 Starter Box Assy., 220-240V
20 2900144 4
21 2900009 4 Flat Washer, 1/4" SAE
22 2900024 4 Lock Washer, 1/4" Split
23 2500032 3 V-Belt 4L-390
Bushing, Taper Lock, 1" Bore,
w/Fasteners
Cap Screw, Hex Hd., 1/4-20 x
3/4"
6011741 ELECTRIC MOTOR GROUP, 7-1/2 HP, 460V
13
19
2
15
18
17
16
21
22
20
35
1
13
12
10
SHOWN AS
REFERENCE
7
3
4
8
6
14
9
23
ITEM PART NO. QTY. DESCRIPTION
1 6048335 1 Motor Adapter Plate
2 2600128 1
3 2900014 8 Flat Washer, 3/8" SAE
4 2900006 4 Lock Washer, 3/8" Split
5 2900013 4
6 2900033 4 Hex Nut, 3/8-16
7 2900530 4 Cap Screw, Flat Hd., 1/2-13 x 1"
8 2501045 1 Sheave, 3.00 - 3 Groove
9 2500370 1 Bushing, Taper Lock, 1-3/8" Bore
2500370B 1 Key, 3/8 x 5/16 x 3/4"
2900138 3 Cap Screw, Hex Hd., 5/16-18 x 1"
10 2501043 1 Sheave, 6.00-3 Groove
Electric Motor, 7-1/2 HP, 3 Ph, CFace
Cap Screw, Hex Hd., 3/8-16 x 11/4"
Spacer, Blade Shaft1604104211
ITEM PART NO. QTY. DESCRIPTION
12 2501044 1
2900138 3 Cap Screw, Hex Hd., 5/16-18 x 1"
2501044B 1 Key, 3/8 x 5/16 x 3/4"
13 2501357 1 Key, 1/4" Sq., x 2.0"
14 6048046 1 Key, 5/16" Sq. x 1-1/2"
15 6041154 1 Bracket, Electric Box
16 2900022 8 Flat Washer, 5/16" SAE
17 2900494 4 Cap Screw, Hex Hd., 5/16-18 x 2"
18 2900039 4 Lock Nut, 5/16-18 Nylon
19 4645262 1 Starter Box Assy., 415-480V
20 2900144 4
21 2900009 4 Flat Washer, 1/4" SAE
22 2900024 4 Lock Washer, 1/4" Split
23 2500032 3 V-Belt 4L-390
Bushing, Taper Lock, 1" Bore,
w/Fasteners
Cap Screw, Hex Hd., 1/4-20 x
3/4"
6048506 STARTER BOX ASSEMBLY, 220-240 VOLT, 1 PH
14
HOLE FOR
CUSTOMER SUPPLIED
POWER CORD.
TO STARTER BOX
OVERLOAD RELAY
AND GROUND LUG
5
6
7
GREEN TO
1
GROUND LUG
ITEM PART NO. QTY. DESCRIPTION
1 4600272 1 Starter Box, 220-240 Volt
2 2802052 1 Cord Connector, 3/4" Thd., .63-75" Cord, 90 Deg.
3 2801304 1 Lock Nut, 3/4"
4 6040647 1 Cable Assy., 10 Ga., 3 Wire x 53"
5 1800810/11 1 Voltage Label, 230/460V
6 1801638 1 Decal, Start
7 1801639 1 Decal, Stop
2
3
4
TO MOTOR
4645261 STARTER BOX ASSEMBLY, 220-240 VOLT
15
HOLE FOR
CUSTOMER SUPPLIED
POWER CORD.
TO STARTER BOX
OVERLOAD RELAY
AND GROUND LUG
5
6
7
GREEN TO
1
GROUND LUG
ITEM PART NO. QTY. DESCRIPTION
1 4600272 1 Starter Box, 220-240 Volt
2 2802052 1 Cord Connector, 3/4" Thd., .63-75" Cord, 90 Deg.
3 2801304 1 Lock Nut, 3/4"
4 6040649 1 Cable Assy., 12 Ga., 4 Wire x 53"
5 1800810/11 1 Voltage Label, 230/460V
6 1801638 1 Decal, Start
7 1801639 1 Decal, Stop
2
3
4
TO MOTOR
4645262 STARTER BOX ASSEMBLY, 415-480 VOLT
16
TO STARTER BOX
OVERLOAD RELAY
AND GROUND LUG
HOLE FOR
CUSTOMER SUPPLIED
PLUG.
GREEN TO
GROUND LUG
5
6
7
1
2
3
4
ITEM PART NO. QTY. DESCRIPTION
1 4600273 1 Starter Box, 415-480 Volt
2 2802052 1 Cord Connector, 3/4" Thd., .63-75" Cord, 90 Deg.
3 2801304 1 Lock Nut, 3/4"
4 6040649 1 Cable Assy., 12 Ga., 4 Wire x 53"
5 1800811 1 Voltage Label, 460V
6 1801638 1 Decal, Start
7 1801639 1 Decal, Stop
TO MOTOR
NOTES
17
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
REPLACE BASE
18
WITH 6040300D
AND INSERTS
4600272 STARTER BOX, 220-240 VOLT
1
2
3
ITEM PART NO. QTY. DESCRIPTION
1 2801032 1 Starter Box, 220-240V
2 6040300D 1 Starter Box Base
3 2901332 4 1/4-20 Threaded Insert
REPLACE BASE
19
WITH 6040300D
AND INSERTS
4600273 STARTER BOX, 415-480 VOLT
1
2
3
ITEM PART NO. QTY. DESCRIPTION
1 2801031 1 Starter Box, 415-480V
2 6040300D 1 Starter Box Base
3 2901332 4 1/4-20 Threaded Insert
2801032 STARTER BOX, 220-240 VOLT
20
12
5
12
14
6
13
15
13
4
7
8
11
10
3
1
16
17
18
4
9
2
19
20
21
4600295
21
SET TO
MOTOR AMP
RATING
5
2801032 STARTER BOX, 220-240 VOLT
12
4600297
4600298
13
TRIP CLASS - 10
RESET - A
PHASE - OFF
4
4600294
ITEM
PART
NO.
1 2702419 1 Electrical Box (Base)
2 6040598 1 Sub-plate
3 2900676 4
4 2801704 1 Contactor, 220-240V (includes coil)
2801265 1 Replacement Coil, 220-240V
5 2801699 1 Overload Relay, 9-45 AMP
6 2801676 1 Auxilary Contacts, 1NO-NC
7 2901827 4 Cap Screw, Soc. Hd., #8-32 x 5/8"
8 2901437 4 Flat Washer, #10
9 2800315 2 Grounding Lug
10 2900024 1 Lock Washer, 1/4" Split
QTY. DESCRIPTION
Machine Screw, Pan Hd., M4-0.7 x
8mm
N.O. ONLY
4600293
4600296
ITEM
PART
NO.
11 2901891 1 Cap Screw, Hex Hd., 1/4-28 x 1/2"
12 2801636 1 E-Stop Switch, 600V
13 2801639 1 Pushbutton, N.O., 600V
14 2701414 4 Fastener, Electrical Box Top
15 6048296 1 Electric Box Cover, 2 Hole
16 4600293 1 Wire, 14 Gage, Yellow, 15"
17 4600294 1 Wire, 14 Gage, Yellow, 6"
18 4600295 1 Wire, 14 Gage, Black, 6"
19 4600296 1 Wire, 14 Gage, Black, 15"
20 4600297 1 Wire, 14 Gage, Red, 12"
21 4600298 2 Wire, 14 Gage, Red, 13"
QTY. DESCRIPTION
2801031 STARTER BOX, 415-480 VOLT
22
12
13
12
15
14
5
13
4
6
8
11
7
10
3
1
16
17
18
19
20
4
9
2
21
4600295
23
SET TO
MOTOR AMP
RATING
2801031 STARTER BOX, 415-480 VOLT
12
13
4600297
5
TRIP CLASS - 10
RESET - A
PHASE - OFF
4
4600294
ITEM
PART
NO.
1 2702419 1 Electrical Box (Base)
2 6040598 1 Sub-plate
3 2900676 4
4 2801707 1 Contactor, 415-480V (Includes Coil)
2801266 1 Replacement Coil, 415-480V
5 2801699 1 Overload Relay, 9-45 AMP
6 2801676 1 Auxilary Contacts, 1NO-NC
7 2901437 4 Flat Washer, #10
8 2901827 4 Cap Screw, Soc. Hd., #8-32 x 5/8"
9 2800315 2 Grounding Lug
10 2900024 1 Lock Washer, 1/4" Split
QTY. DESCRIPTION
Machine Screw, Pan Hd., M4-0.7 x
8mm
N.O. ONLY
4600298
4600293
4600296
ITEM
PART
NO.
11 2901891 1 Cap Screw, Hex Hd., 1/4-28 x 1/2"
12 2801636 1 E-Stop Switch, 600V
13 2801639 1 Pushbutton, N.O., 600V
14 6048296 1 Electric Box Cover, 2 Hole
15 2701414 4 Fastener, Electrical Box Top
16 4600293 1 Wire, 14 Gage, Yellow, 15"
17 4600294 1 Wire, 14 Gage, Yellow, 6"
18 4600295 1 Wire, 14 Gage, Black, 6"
19 4600296 1 Wire, 14 Gage, Black, 15"
20 4600297 1 Wire, 14 Gage, Red, 12"
21 4600298 2 Wire, 14 Gage, Red, 13"
QTY. DESCRIPTION
EQUIPMENT AND PARTS
WARRANTY
Diamond Products warrants all equipment manufactured by it against defects
in workmanship or materials for a period of one (1) year from the date of
shipment to Customer.
The responsibility of Diamond Products under this Warranty is limited to
replacement or repair of defective parts at Diamond Products’ Elyria, Ohio
factory, or at a point designated by it, of such parts as shall appear to us upon
inspection at such parts, to have been defective in material or workmanship,
with expense for transportation and labor borne by Customer.
In no event shall Diamond Products be liable for consequential or
incidental damages arising out of the failure of any Product to operate properly.
Integral units such as engines, electric motors, batteries, transmissions,
etc., are excluded from this Warranty and are subject to the prime
manufacturer’s warranty.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY
DISCLAIMED.
333 Prospect Street, Elyria, Ohio 44035
(440) 323-4616 (800) 321-5336 Fax (440) 323-8689
www.diamondproducts.com
Printed in U.S.A. #1800502
Loading...