DewertOkin RF339 User Manual

ShenZhen C&D Electro nics CO .Ltd.

Add: Buildin g 2, Xiayousong Mount aintop Industrial District, YousongVilla ge,LongHua Town, Baoan District ShenZhen China Zip 51810 9

Tel: [phone] Fax: [phone]

E-mail: [e-mail]

Remote control sp ecification

docu ment se ries number
	product name	2.4G		remote control
	product model			R F339
	approval			/ date
	checked			/ date
	made			/ date

custome r approval

customer

check approval

DEWERT

version record

version	date	name	remark
V0.1	2015 5 5		draft

2 Index

NO.	appellation
1	(Approval Sheet Cover)
2	(Index)
3	(Verification content & Requirement)
4	(Product Cosmetics drawing)
5	RF transmit distance
6	software function
7	(Schematic diagram)
8	(Explosion drawing)
9	dimension drawing
10	packing drawing

SHENZHEN C&D ELECTRONICS CO., LTD.

3. (Verification content & Requirement)

1 (General Items)

1.1 Apply for: RF339

1.2 Working Environment: 0 ~40 8 ~90 RH 1.3 Storage Environment: 40 ~70 5 ~90 RH

1.4 Test Environment:5 ~35 45 ~75 RH 86~106Kpa 1.5 Rating Voltage:DC4.5V

1.6 Power: AAA*3 pcs

1.7 Weight 145g

2 Visible Test ItemTest Conditions

A: 30CM 10 Put the top face under the standard light source

and test by sight from the 30cm distance for 10 seconds

B: 50CM 5 Put other sides under the standard light source and

test by sight from the 50cm distance for 5 seconds

			Item	Test Requirements
No.
2.1				No described situations
			Scratches, Stain and distortion of the Unit
2.2
			Hot Stamped Graphics and Letters	Correct, in focus and comply with the drawing
2.3		Match of top case and bottom case
				No distortion and Crack between the twoparts
2.4			Appearance	Correct material and color
3			Electric Capability
				Test Requirements
3.0			IC	nordic NRF24LE1
3.2			Working Voltage	DC4.5V
3.3			Static Current	<10uA
3.4			Working Current	22mA±3mA

Page 3/14

		SHENZHEN C&D ELECTRONICS CO., LTD.
	3.7						Refer to Schematic Diagram
		Schematic Diagram
	3.11					±150KHz
	3.12					0dB
	3.15
		Actual performance test				No Failure in each key Operation
	3.2 Mechanical Capacity
		Item				Test Requirements
	No.
				80CM 6 3CM
				a b c
				d
	4.1		Drop the 6 faces of the bare unit from the height of 80cm of the steel which
		Drop Test
			is 3cm thick and test: A> the battery separate from the remote is
			acceptable. B> the remote works well after reinstall. C> no damages on
			mechanical. d. the above electronic capacity work well
				5 a 10~30~10Hz
				0.75mm b 30~55~30Hz 0.15mm
	4.2			,
		Vibration Test		5 recycle of 2 frequencies in the horizontal and vertical direction: a.
				frequency 10~30~10Hz to move 0.75mm. b. frequency 30~55~30Hz to
				move 0.15mm, no damages in mechanical and electronic capacity
				1. 3M 600 5
	4.3		3M tape(600) 5 times, the print is complete
		Print a Adhesion Test		2. RCA : 225gf 100CM
					RCA test: use 225gf force, 100CM length tape, the print is complete
				1. 99% 1min,500gf 20
	4.4
		Print corrosion test		Sink the cotton in 99% alcohol 1 minutes with 500 gf for to scrub the print
				20 time
	4.5
		Sound Request			There shall be no rattling when the remote is shaken.

Page 4/14

		SHENZHEN C&D ELECTRONICS CO., LTD.
	3.3 Environmental Test
	Item
No.
		0ºC~ +40ºC
5.1	Operating	The RCU shall be capable of operating in an ambient temperature range of 0ºC
	Temperature	to +40ºC.
		8%º~90% ,
5.2	Operating	The device shall be capable of operating in a relative humidity range of 8% to
	Humidity	90%, non condensing.
		40º ~+70ºC
5.3	Storage	The RCU shall be capable of operating after being stored in an ambient
	Temperature	temperature range of 40º to +70ºC.
		5%~ 90%
5.4	Storage	The RCU shall be capable of operating after being stored in a relative humidity
	Humidity	range of 5% to 90%, non condensing.
	3.4 Compliant
	Item	Specs
No.
		FCC ID
6.1	FCC
6.2	IC	IC ID

Page 5/14