DeWalt DCH143, DCH243, DCH254, DCH253 User Manual

Page 1
DCH143 DCH243 DCH253 DCH254
Page 2
English (original instructions) 4
II
Copyright DEWALT
Page 3
Figure 1
m
e
Figure 2
j
DCH143 DCH253 DCH254
l
o
k
c
i
a
h
g
f
1
Page 4
Figure 3
Figure 5
Figure 4
f
g
f
n
l
o
m
2
Page 5
Figure 6
Figure 7
DCH254
l
3
Page 6
ENGLISH
HEAVY-DUTY CORDLESS ROTARY HAMMERDRILL DCH143, DCH243, DCH253, DCH254
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users.
Technical Data
DCH143 DCH243 DCH253 DCH254
Voltage VDC 14.4 18 18 18 Type 1 1 1 1 No-load speed min-1 1100 1150 1200 1200 Impact rate min-1 4350 4400 4500 4500 Impact energy (EPTA 05/2009) J 2 2.1 2.1 2.1 Maximum drilling range
in steel/wood/concrete mm 10/20/20 13/26/20 13/26/24 13/26/24 Chuck SDS Plus® SDS Plus® SDS Plus® SDS Plus Collar diameter mm 54 54 54 54 Battery Type Li-Ion Li-Ion Li-Ion Li-Ion Weight (without battery pack) kg 2.5 2.4 2.5 2.6
®
LPA (sound pressure) dB(A) KPA (sound pressure uncertainty) dB(A) LWA (sound power) dB(A) KWA (sound power uncertainty) dB(A)
Vibration total values (triax vector sum) determined according to EN 60745:
h
m/s²
h
m/s²
h
m/s²
h
m/s²
5.4 6.0 5.4 5.4
≤ 2.5 ≤ 2.5 ≤ 2.5 ≤ 2.5
≤ 2.5 ≤ 2.5 ≤ 2.5 ≤ 2.5
Vibration emission value a Drilling into concrete a
Vibration emission value a Chiselling a
Vibration emission value a Drilling into metal a
Vibration emission value a Screwdriving ah =
=
h,HD
Uncertainty K = m/s²
=
h,Cheq
Uncertainty K = m/s²
=
h,D
Uncertainty K = m/s²
Uncertainty K = m/s²
86 86 86 86
3 3 3 3
97 97 97 97
3 3 3 3
6.6 7.4 6.6 6.6
1.5 1.5 1.5 1.5
1.5 1.5 1.5 1.5
1.5 1.5 1.5 1.5
1.5 1.5 1.5 1.5
4
Page 7
ENGLISH
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications of the
An estimation of the level of exposure to vibration should also take into account the times when
Identify additional safety measures to protect the operator from the effects of vibration such as:
Battery pack DCB140 DCB141 DCB142 DCB180 DCB181 DCB182 DCB183
Battery type Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Voltage V Capacity Ah 3.0 1.5 4.0 3.0 1.5 4.0 2.0 Weight kg 0.53 0.30 0.54 0.64 0.35 0.61 0.40
Charger DCB105
Mains voltage VAC 230 V Battery type Li-Ion Approx. charging time min 30 45 55 70
(1.5 Ah (2.0 Ah (3.0 Ah (4.0 Ah battery packs) battery packs) battery packs) battery packs)
Weight kg 0.49
tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.
the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
14.4 14.4 14.4 18 18 18 18
DC
Fuses:
Europe 230 V tools 10 Amperes, mains U.K. & Ireland 230 V tools 3 Amperes, in plugs
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if not avoided, may result in property damage.
Denotes risk of fire.
Denotes risk of electric shock.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DCH143, DCH243, DCH253, DCH254
DEWALT declares that these products described under Technical Data are in compliance with: 2006/42/EC, EN 60745-1, EN60745-2-6.
These products also comply with Directive 2004/108/EC and 2011/65/EU. For more information, please contact DEWALT at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of DEWALT.
5
Page 8
ENGLISH
Horst Grossmann Vice President Engineering and Product Development D
EWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
01.01.2013
WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery­operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
b) Do not operate power tools in explosive
c) Keep children and bystanders away while
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
b) Avoid body contact with earthed or
c) Do not expose power tools to rain or wet
and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Cluttered or dark areas invite accidents.
atmospheres, such as in the presence of flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.
operating a power tool. Distractions can cause you to lose control.
Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
grounded surfaces such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or grounded.
conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and
use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger
on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper
footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
6
Page 9
ENGLISH
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional Safety Instructions for Rotary Hammers
Wear ear protectors. Exposure to noise can
cause hearing loss.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
Hold power tools by insulated gripping
surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will make
exposed metal parts of the tool “live” and could give the operator an electrical shock.
Use clamps or other practical way to secure
and support the workpiece to a stable platform. Holding the work by hand or against
your body is unstable and may lead to loss of control.
Wear safety goggles or other eye protection.
Hammering operations cause chips to fly. Flying particles can cause permanent eye damage. Wear a dust mask or respirator for applications that generate dust. Ear protection may be required for most applications.
Keep a firm grip on the tool at all times.
Do not attempt to operate this tool without holding it with both hands. It is
recommended that the side handle be used at all times. Operating this tool with one hand will result in loss of control. Breaking through or encountering hard materials such as re-bar may be hazardous as well. Tighten the side handle securely before use.
Do not operate this tool for long periods of time. Vibration caused by hammer action may be harmful to your hands and arms. Use gloves to provide extra cushion and limit exposure by taking frequent rest periods.
Do not recondition bits yourself. Chisel reconditioning should be done by an authorized specialist. Improperly reconditioned chisels could cause injury.
7
Page 10
ENGLISH
Wear gloves when operating tool or changing bits. Accessible metal parts on the
tool and bits may get extremely hot during operation. Small bits of broken material may damage bare hands.
Never lay the tool down until the bit has come to a complete stop. Moving bits could cause injury.
Do not strike jammed bits with a hammer to dislodge them. Fragments of metal or material chips could dislodge and cause injury.
Slightly worn chisels can be resharpened by
grinding.
Keep the power cord away from the rotating bit. Do not wrap the cord around any part of
your body. An electric cord wrapped around a spinning bit may cause personal injury and loss of control.
Residual Risks
The following risks are inherent to the use of rotary hammers:
– Injuries caused by touching the rotating parts or
hot parts of the tool.
In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are:
– Impairment of hearing.
– Risk of squeezing fingers when changing the
accessory.
– Health hazards caused by breathing dust
developed when working in concrete and/or masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION
The date code, which also includes the year of manufacture, is printed into the housing surface that forms the mounting joint between tool and battery.
Example:
2013 XX XX
Year of Manufacture
Important Safety Instructions for All Battery Chargers
SAVE THESE INSTRUCTIONS: This manual contains important safety and operating instruc tions for the DCB105 battery charger.
• Before using the charger, read all instructions and cautionary markings on charger, battery pack and product using the battery pack.
CAUTION: Children should be
NOTICE: Under certain conditions, with
• DO NOT attempt to charge the battery pack
• These chargers are not intended for
• Do not expose charger to rain or snow.
• Pull by plug rather than cord when
WARNING: Shock hazard. Do not allow
any liquid to get inside charger. Electric shock may result.
CAUTION: Burn hazard. To reduce
the risk of injury, charge only DEWALT rechargeable battery packs. Other types of batteries may overheat and burst resulting in personal injury and property damage.
supervised to ensure that they do not play with the appliance.
the charger plugged in to the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.
with any chargers other than the ones in this manual. The charger and battery pack are
specifically designed to work together.
any uses other than charging DEWALT rechargeable batteries. Any other uses
may result in risk of fire, electric shock or electrocution.
disconnecting charger. This will reduce risk of damage to electric plug and cord.
8
Page 11
ENGLISH
• Make sure that cord is located so that it will not be stepped on, tripped over or otherwise subjected to damage or stress.
• Do not use an extension cord unless it is absolutely necessary. Use of improper
extension cord could result in risk of fire, electric shock or electrocution.
• When operating a charger outdoors, always provide a dry location and use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
• Do not block the ventilation slots on the charger. The ventilation slots are located on the top and sides of the charger. Place
the charger in a position away from any heat source.
• Do not operate charger with damaged cord or plug — have them replaced immediately.
Do not operate charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Take it to an authorised
service centre.
• Do not disassemble the charger; take it to an authorised service centre when service or repair is required. Incorrect reassembly may
result in a risk of electric shock, electrocution or fire.
• In case of damaged power supply cord the supply cord must be replaced immediately by the manufacturer, its service agent or similar qualified person to prevent any hazard.
• Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing
the battery pack will not reduce this risk.
• NEVER attempt to connect 2 chargers together.
• The charger is designed to operate on standard 230 V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular
charger.
SAVE THESE INSTRUCTIONS
Chargers
The DCB105 charger accepts 10.8 V, 14.4 V and 18 V Li-Ion (DCB121, DCB123, DCB140, DCB141, DCB142, DCB180, DCB181, DCB182 and DCB183) battery packs.
This charger requires no adjustment and is designed to be as easy as possible to operate.
Charging Procedure (fi g. 4)
1. Plug the charger into an appropriate 230 V outlet before inserting the battery pack.
2. Insert the battery pack (f) into the charger, making sure the pack is fully seated in the charger. The red (charging) light will blink continuously indicating that the charging process has started.
3. The completion of charge will be indicated by the red light remaining ON continuously. The pack is fully charged and may be used at this time or left in the charger.
NOTE: To ensure maximum performance and life of Li-Ion batteries, charge the battery pack fully before first use.
Charging Process
Refer to the table below for the state of charge of the battery pack.
State of charge
charging –– –– –– ––
fully charged –––––––––––––––––
hot/cold pack delay –– • –– • –– • –– •
x problem pack or charger • • • • • • • • • • • •
problem powerline •• •• •• •• •• ••
This charger will not charge a faulty battery pack. The charger will indicate faulty battery by refusing to light or by displaying problem pack or charger blink pattern.
NOTE: This could also mean a problem with a charger.
If the charger indicates a problem, take the charger and battery pack to be tested at an authorised service centre.
Hot/Cold Pack Delay
When the charger detects a battery that is too hot or too cold, it automatically starts a hot/cold pack delay, suspending charging until the battery has reached an appropriate temperature. The charger then automatically switches to the pack charging mode. This feature ensures maximum battery life.
XR Li-Ion tools are designed with an Electronic Protection System that will protect the battery against overloading, overheating or deep discharge.
The tool will automatically turn off if the Electronic Protection System engages. If this occurs, place the Li-Ion battery on the charger until it is fully charged.
9
Page 12
ENGLISH
A cold battery pack will charge at about half the rate of a warm battery pack. The battery pack will charge at that slower rate throughout the entire charging cycle and will not return to maximum charge rate even if the battery warms.
Important Safety Instructions for All Battery Packs
When ordering replacement battery packs, be sure to include the catalogue number and voltage.
The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below and then follow the charging procedures outlined.
READ ALL INSTRUCTIONS
• Do not charge or use the battery pack in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery pack
from the charger may ignite the dust or fumes.
Never force the battery pack into charger.
Do not modify the battery pack in any way to fit into a non-compatible charger as battery pack may rupture causing serious personal injury.
• Charge the battery packs only in designated DEWALT chargers.
• DO NOT splash or immerse in water or other liquids.
• Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 40˚C (105°F) (such as outside sheds or metal buildings in summer).
• For best results, make sure the battery pack is fully charged before use.
WARNING: Never attempt to open
the battery pack for any reason. If the battery pack case is cracked or damaged, do not insert it into the charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (e.g., pierced with a nail, hit with a hammer, stepped on). Electric shock or electrocution may result. Damaged battery packs should be returned to the service centre for recycling.
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (Li-Ion)
• Do not incinerate the battery pack even if it
• If battery contents come into contact with
• Contents of opened battery cells may cause
CAUTION: When not in use, place
tool on its side on a stable surface where it will not cause a tripping or falling hazard. Some tools with large
battery packs will stand upright on the battery pack but may be easily knocked over.
is severely damaged or is completely worn out. The battery pack can explode in a fire.
Toxic fumes and materials are created when lithium ion battery packs are burned.
the skin, immediately wash the area with mild soap and water. If the battery liquid gets
into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.
respiratory irritation. Provide fresh air. If symptoms persists, seek medical attention.
WARNING: Burn hazard. Battery liquid
may be flammable if exposed to spark or flame.
Battery Pack
BATTERY TYPE
The DCH143 operates on 14.4 V battery packs. The DCH243, DCH253 and DCH254 operate on 18 V battery packs.
The DCB140, DCB141 or DCB142 battery packs (14.4 V) may be used on the DCH143.
The DCB180, DCB181, DCB182 or DCB183 battery packs (18 V) may be used on the DCH243, DCH253 and DCH254.
Storage Recommendations
1. The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold. For optimum battery performance and life, store battery packs at room temperature when not in use.
2. For long storage, it is recommended to store a fully charged battery pack in a cool, dry place out of the charger for optimal results.
NOTE: Battery packs should not be stored completely depleted of charge. The battery pack will need to be recharged before use.
10
Page 13
ENGLISH
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels on the charger and the battery pack show the following pictographs:
Read instruction manual before use.
Charging.
Fully charged.
Hot/cold pack delay.
Problem pack or charger.
x
Problem powerline.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Use only with DEWALT battery packs.
Others may burst, causing personal injury and damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4°C and 40°C.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack.
Charges Li-Ion battery packs.
See Technical Data for charging time.
Only for indoor use.
Package Contents
The package contains: 1 Cordless rotary hammerdrill 1 Side handle 1 Charger 1 Battery pack (D1, L1, M1) 2 Battery packs (D2, L2, M2) 3 Battery packs (D3, L3, M3) 1 Keyless chuck (DCH253) 1 Kitbox 1 Instruction manual 1 Exploded drawing
NOTE: Battery packs and chargers are not included with N-models.
• Check for damage to the tool, parts or accessories which may have occurred during transport.
• Take the time to thoroughly read and understand this manual prior to operation.
Description (fi g. 1, 3, 7)
WARNING: Never modify the power
tool or any part of it. Damage or personal injury could result.
a. Variable speed switch b. Forward/reverse button c. Mode selector d. Worklight (DCH143, DCH253, DCH254) e. Side handle f. Battery pack g. Release button h. Main handle i. Drill bit symbol (rotary drilling mode) j. Hammerdrilling symbol (rotary hammering
mode)
k. Hammer symbol (hammering only mode) l. SDS Plus® tool holder m. Sleeve n. fuel gauge button o. dust cover p Locking collar q. Keyless chuck
11
Page 14
ENGLISH
INTENDED USE
Your DCH143, DCH243, DCH253 and DCH254 cordless rotary hammerdrills have been designed for professional drilling and hammerdrilling applications, as well as screwdriving and chipping applications.
DO NOT use under wet conditions or in presence of flammable liquids or gases.
These hammerdrills are professional power tools. DO NOT let children come into contact with the
tool. Supervision is required when inexperienced operators use this tool.
• This product is not intended for use by persons (including children) suffering from diminished physical, sensory or mental abilities; lack of experience, knowledge or skills unless they are supervised by a person responsible for their safety. Children should never be left alone with this product.
Electrical Safety
The electric motor has been designed for one voltage only. Always check that the battery pack voltage corresponds to the voltage on the rating plate. Also make sure that the voltage of your charger corresponds to that of your mains.
Your DEWALT charger is double insulated
in accordance with EN 60335; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by a specially prepared cord available through the DEWALT service organization.
Mains Plug Replacement (U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless absolutely necessary. Use an approved extension cable suitable for the power input of your charger (see Technical Data). The minimum conductor size is 1 mm2; the maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
ASSEMBLY AND ADJUSTMENTS
WARNING: Prior to assembly and
adjustment, always remove the battery pack. Always switch off the tool before inserting or removing the battery pack.
WARNING: Use only DEWALT battery
packs and chargers.
Inserting and Removing the Battery Pack from the Tool (fi g. 3)
WARNING: To reduce the risk of injury,
NOTE: For best results, make sure your battery pack is fully charged.
TO INSTALL THE BATTERY PACK INTO THE TOOL HANDLE
1. Align the battery pack (f) with the rails inside the
2. Slide it into the handle until the battery pack is
TO REMOVE THE BATTERY PACK FROM THE TOOL
1. Press the battery release button (g) and firmly
2. Insert battery pack into the charger as
FUEL GAUGE BATTERY PACKS (FIG. 3)
Some DEWALT battery packs include a fuel gauge which consists of three green LED lights that indicate the level of charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button (n). A combination of the three green LED lights will illuminate designating the level of charge left. When the level of charge in the battery is below the usable limit, the fuel gauge will not illuminate and the battery will need to be recharged.
NOTE: The fuel gauge is only an indication of the charge left on the battery pack. It does not indicate tool functionality and is subject to variation based on product components, temperature and end-user application.
never depress the battery release button without removing the battery pack. Depressing the battery release button without removing the battery pack can result in the battery pack falling out unexpectedly.
tool’s handle (fig. 3).
firmly seated in the tool and ensure that it does not disengage.
pull the battery pack out of the tool handle.
described in the charger section of this manual.
12
Page 15
ENGLISH
Variable Speed Switch (fi g. 1)
To turn the tool on, squeeze the trigger switch (a). To turn the tool off, release the trigger switch. Your tool is equipped with a brake. The tool holder will stop as soon as the trigger switch is fully released.
The variable speed trigger switch enables you to select the best speed for a particular application. The farther you squeeze the trigger switch, the faster the tool will operate. For maximum tool life, use variable speed only for starting holes or fasteners.
NOTE: Continuous use in variable speed range is not recommended. It may damage the switch and should be avoided.
Side Handle (fi g. 1)
WARNING: To reduce the risk of
personal injury, ALWAYS operate the tool with the side handle properly installed. Failure to do so may result in the side handle slipping during tool operation and subsequent loss of control. Hold tool with both hands to maximize control.
The side handle (e) clamps to the front of the gear case and may be rotated 360˚ to permit right- or left-hand use. Side handle must be tightened sufficiently to resist the twisting action of the tool if the accessory binds or stalls. Be sure to grip the side handle at the far end to control the tool during a stall.
To loosen side handle, rotate counterclockwise.
Forward/Reverse Control Button (fi g. 1, 2)
WARNING: Always wait until the motor
has come to a complete standstill before changing the direction of rotation.
A forward/reverse control button (b) determines the direction of the tool and also serves as a lock off button.
To select forward rotation, release the trigger switch and depress the for ward/re verse control button on the right side of the tool.
To select reverse, release the trigger switch and depress the forward/reverse control button on the left side of the tool.
The center position of the control button locks the tool in the off position. When changing the position of the control button, be sure the trigger is released.
NOTE: The first time the tool is run after changing the direction of rotation, you may hear a click on start up. This is normal and does not indicate a problem.
Worklight (fi g. 1)
DCH143, DCH253, DCH254
There is a worklight (d) located on the front of the tool. The worklight will be activated when the trigger switch is squeezed. The worklight is activated when the trigger switch is depressed, and will automatically turn off 20 seconds after the trigger switch is released. If the trigger switch remains depressed, the worklight will remain on.
NOTE: The worklight is for lighting the immediate work surface and is not intended to be used as a flashlight.
Selecting the Operating Mode (fi g. 1)
WARNING: Do not select the operating
mode when the tool is running.
Your tool is equipped with a separate mode selector (c) to switch between rotary drilling, rotary hammering and hammering only mode.
Rotary drilling: for screwdriving and for drilling
into steel, wood and plastics.
Rotary hammering: for concrete and
masonry drilling.
Hammering only: for light chipping.
For rotary drilling, rotate the mode selector (c) until the arrow points to the drill bit symbol (i). For rotary hammering mode, align the arrow with the hammerdrilling symbol (j). For hammering only mode, align arrow with the hammer symbol (k).
NOTE: The mode selector (c) must be in rotary drilling, rotary hammering or hammering only mode at all times. There are no operable positions in between.
Active Vibration Control (fi g. 1)
The active vibration control neutralises rebound vibration from the hammer mechanism. Lowering hand and arm vibration, it allows more comfortable use for longer periods of time and extends the life of the unit.
13
Page 16
ENGLISH
For best vibration control, hold the tool with one hand on the main handle (h) and the other hand on the side handle (e). The hammer only needs enough pressure to engage the internal active vibration control. Applying too much pressure will not make the tool drill faster and active vibration control will not engage.
SDS Plus® Tool Holder (fi g. 5)
To insert a drill or chisel bit, insert the shank of the bit about 19 mm (3/4") into SDS Plus® tool holder (l). Push and rotate bit until it locks in place. The bit will be securely held.
To release bit, pull the sleeve (m) back and remove the bit.
Replacing the SDS Plus® Tool Holder with the Keyless Chuck (fi g. 7)
DCH254
1. Turn the locking collar (p) into the unlocked position and pull the SDS Plus® tool holder (l) off.
2. Push the keyless chuck (q) onto the spindle and turn the locking collar into the locking position.
3. To replace the keyless chuck with the SDS Plus® tool holder, first remove the keyless chuck the same way as the SDS Plus® tool holder was removed. Then replace the SDS Plus® tool holder the same way as the keyless chuck was replaced.
WARNING: Never use standard chucks
in the rotary hammering mode.
Overload Clutch
In case of jamming of a drill bit, the drive to the drill spindle is interrupted. Because of the resulting forces, always hold the tool with both hands and take a firm stance.
OPERATION
Instructions for Use
WARNING:
• Always observe the safety instructions
and applicable regulations.
Be aware of the location of pipework
and wiring.
Apply only a gentle pressure to
the tool (approx. 5 kg). Excessive force does not speed up drilling but decreases tool performance and may shorten tool life.
Do not drill or drive too deep to prevent damage to the dust cover (o).
Always hold the tool firmly with both hands and ensure a secure stance. Always operate the tool with the side handle properly mounted.
WARNING: To reduce the risk of
serious personal injury, turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories.
Proper Hand Position (fi g. 1, 6)
WARNING: To reduce the risk of
serious personal injury, ALWAYS use proper hand position as shown in figure 6.
WARNING: To reduce the risk of
serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction.
Proper hand position requires one hand on the main handle (h), with the other hand on the side handle(e).
Drill Operation (fi g. 1)
WARNING: To reduce the risk of
serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories.
WARNING: To reduce the risk of
personal injury, ALWAYS ensure workpiece is anchored or clamped firmly. If drilling thin material, use a wood “back-up” block to prevent damage to the material.
HAMMERDRILLING (FIG. 1)
1. Set the mode selector switch (c) to the "rotary
hammering" position.
2. Insert the appropriate drill bit. For best results
use high quality carbide-tipped bits.
3. Adjust the side handle (e) as required.
4. Mark the spot where the hole is to be drilled.
5. Place the drill bit on the spot and switch on the
tool.
14
Page 17
ENGLISH
ROTARY DRILLING (FIG. 1)
1. Set the mode selector switch (c) to the "rotary drilling" position.
2. Depending on your tool, follow either of the following instructions:
Fit a chuck adaptor/chuck assembly
(DCH143, DCH243, DCH253). Special SDS
®
Plus
adaptors with threaded sections are available for use with standard 10 or 13 mm chucks to enable straight shank bits to be used.
Replace the SDS Plus® tool holder with the
keyless chuck (DCH254).
3. Proceed as described for rotary hammering.
WARNING: Never use standard chucks
SCREWDRIVING (FIG. 1)
1. Set the mode selector switch (c) to the "rotary
2. Select the direction of rotation.
3. Depending on your tool, follow either of the
Insert the special SDS Plus® screwdriving
Replace the SDS Plus® tool holder with the
4. Insert the appropriate screwdriver bit. When
5. Gently press the variable speed switch (a) to
6. When the screw is flush with the workpiece,
CHIPPING (FIG. 1)
1. Set the mode selector switch (c) to the
2. Insert the appropriate chisel and check if it is
3 Adjust the side handle (e) as required.
4. Switch on the tool and start working. It may be necessary to briefly run the motor after
having changed from chiselling to rotary modes in order to align the gears.
in the rotary hammering mode.
drilling" position.
following instructions:
adaptor for use with hexagonal screwdriver bits (DCH143, DCH243, DCH253).
keyless chuck (DCH254).
driving slotted head screws always use bits with a finder sleeve.
prevent damage to the screw head. In reverse (LH) rotation the tool speed is automatically reduced for easy screw removal.
release the variable speed switch to prevent the screw head from penetrating into the workpiece.
"hammering only" position.
properly locked.
Do not use this tool to mix or pump
Do not mix or stir inflammable liquids
WARNING:
easily combustible or explosive fluids (benzine, alcohol, etc.).
labelled accordingly.
MAINTENANCE
Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of
This machine is not user-serviceable. Take the tool to an authorised DEWALT repair agent after approximately 40 hours of use. If problems occur before this time contact an authorised DEWALT repair agent.
The charger and battery pack are not serviceable. There are no serviceable parts inside.
serious personal injury, turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up
can cause injury.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
15
Page 18
ENGLISH
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before cleaning. Dirt and grease may be removed from the exterior of the charger using a cloth or soft non-metallic brush. Do not use water or any cleaning solutions.
Optional Accessories
WARNING: Since accessories, other
than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT recommended accessories should be used with this product.
Various types of SDS Plus® drill bits and chisels are available as an option.
Accessories and attachments used must be regularly lubricated around the SDS Plus® fitment.
Consult your dealer for further information on the appropriate accessories.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal household waste.
You can check the location of your nearest authorised repair agent by contacting your local D
EWALT office at the address indicated in this
manual. Alternatively, a list of authorised D repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.
EWALT
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails to produce sufficient power on jobs which were easily done before. At the end of its technical life, discard it with due care for our environment:
• Run the battery pack down completely, then remove it from the tool.
• Li-Ion cells are recyclable. Take them to your dealer or a local recycling station. The collected battery packs will be recycled or disposed of properly.
Should you find one day that your D needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and used again. Re-use of
recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
EWALT provides a facility for the collection and
D recycling of DEWALT products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
16
EWALT product
Page 19
GUARANTEE
DEWALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your DEWALT tool, simply return it within 30 days, complete with all original components, as purchased, to the point of purchase, for a full refund or exchange. The product must have been subject to fair wear and tear and proof of purchase must be produced.
ONE YEAR FREE SERVICE CONTRACT
If you need maintenance or service for your
EWALT tool, in the 12 months following
D purchase, you are entitled to one service free of charge. It will be undertaken free of charge at an authorised DEWALT repair agent. Proof of purchase must be produced. Includes labour. Excludes accessories and spare parts unless failed under warranty.
ONE YEAR FULL WARRANTY
EWALT product becomes defective
If your D due to faulty materials or workmanship within 12 months from the date of purchase, DEWALT guarantees to replace all defective parts free of charge or – at our discretion – replace the unit free of charge provided that:
• The product has not been misused;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorised persons;
• Proof of purchase is produced;
• The product is returned complete with all original components.
If you wish to make a claim, contact your seller or check the location of your nearest authorised DEWALT repair agent in the DEWALT catalogue or contact your DEWALT office at the address indicated in this manual. A list of authorised DEWALT repair agents and full details of our after-sales service is available on the Internet at: www.2helpU.com.
ENGLISH
17
Page 20
Belgique et Black & Decker - DEWALT Dutch Tel: 32 70 220 063 Fax: 32 70 225 585 Luxembourg Nieuwlandlaan 7, IZ Aarschot B156 French Tel: 32 70 220 062 Fax: 32 70 222 441 België en B-3200 Aarschot www.dewalt.be Luxemburg
Danmark D
EWALT Tlf: 70201511
Sluseholmen 2-4 Fax: 70224910 2450 København SV www.dewalt.dk
Deutschland D
EWALT Tel: 06126-21-1
Richard Klinger Str. 11 Fax: 06126-21-2770 65510 Idstein www.dewalt.de
Ελλάς Black & Decker (Ελλάς) Α.Ε. Τηλ : 30 210 8981-616 www.dewalt.gr
Στράβωνος 7 & Βουλιαγμένης 159 Service: 30 210 8981-616 Γλυφάδα 16674, Αθήνα Φαξ: 30 210 8983-570
España D
EWALT Tel: 934 797 400
Parque de Negocios “Mas Blau” Fax: 934 797 419 Edificio Muntadas, c/Bergadá, 1, Of. A6 www.dewalt.es 08820 El Prat de Llobregat (Barcelona)
France D
EWALT Tel: 04 72 20 39 20
5, allée des hêtres Fax: 04 72 20 39 00 BP 30084, 69579 Limonest Cedex www.dewalt.fr
Schweiz D
EWALT Tel: 044 - 755 60 70
Suisse In der Luberzen 42 Fax: 044 - 730 70 67 Svizzera 8902 Urdorf www.dewalt.ch
Ireland D
EWALT Tel: 00353-2781800
Calpe House Rock Hill Fax: 00353-2781811 Black Rock, Co. Dublin www.dewalt.ie
Italia D
EWALT Tel: 800-014353
c/o Energypark Building 03 sud, Via Monza 7/A, Fax: 39 039 9590 317 20871 Vimercate (MB), IT www.dewalt.it
Nederlands Black & Decker - D
EWALT Tel: 31 164 283 063
Joulehof 12 Fax: 31 164 283 200 4600 AB Bergen Op Zoom www.dewalt.nl
Norge D
EWALT Tel: 45 25 13 00
Postboks 4613, Nydalen Fax: 45 25 08 00 0405 Oslo www.dewalt.no
Österreich D
EWALT Tel: 01 - 66116 - 0
Werkzeug Vertriebsges m.b.H Fax: 01 - 66116 - 14 Oberlaaerstrasse 248 www.dewalt.at A-1230 Wien
Portugal D
EWALT Tel: 214 66 75 00
Centro de Escritórios de Sintra Avenida Almirante Fax: 214 66 75 75 Gago Coutinho, 132/134, Edifício 142710-418 Sintra www.dewalt.pt 2710-418 Lisboa
Suomi D
EWALT Puh: 010 400 430
Tekniikantie 12 Faksi: 0800 411 340 02150 Espoo, Finland www.dewalt.fi
Sverige D
EWALT Tel: 031 68 61 00
Box 94 Fax: 031 68 60 08 431 22 Mölndal www.dewalt.se
Türkiye
KALE Hırdavat ve Makina A.Ş. Tel: 0212 533 52 55
Defterdar Mah. Savaklar Cad. No:15 Faks: 0212 533 10 05 Edirnekapı / Eyüp / İSTANBUL 34050 TÜRKİYE www.dewalt.com.tr
United D
EWALT Tel: 01753-56 70 55 www.dewalt.co.uk
Kingdom 210 Bath Road; Slough, Berks SL1 3YD Fax: 01753-57 21 12 Middle East D
EWALT Tel: 971 4 8863030
Africa P.O. Box - 17164, Fax: 971 4 8863333 Jebel Ali (South Zone), Dubai, UAE www.dewalt.ae
N230137 04/13
Page 21
DCF813
www .
.eu
DCF815
Page 22
Dansk (oversat fra original brugsvejledning) 3
Deutsch (übersetzt von den Originalanweisungen) 14
English (original instructions) 26
Español (traducido de las instrucciones originales) 36
Français (traduction de la notice d’instructions originale) 48
Italiano (tradotto dalle istruzioni originali) 60
Nederlands (vertaald vanuit de originele instructies) 72
Norsk (oversatt fra de originale instruksjonene) 84
Português (traduzido das instruções originais) 95
Suomi (käännetty alkuperäisestä käyttöohjeesta) 107
Svenska (översatt från de ursprungliga instruktionerna) 117
Türkçe (orijinal talimatlardan çevrilmiştir) 128
Ελληνικά (μετάφραση από τις πρωτότυπες οδηγίες) 139
2
Copyright DEWALT
Page 23
Figure 1
j
i
g
a
g
e
DCF813
g
c
h
g
a
f
Figure 2
DCF815
h
e
f
f
k
1
Page 24
Figure 3
Figure 5
Figure 4
c
c
e
f
i
j
2
Page 25
ENGLISH
10.8 V CORDLESS IMPACT WRENCH DCF813
10.8 V CORDLESS IMPACT DRIVER DCF815
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users.
Technical Data
DCF813 DCF815
Voltage V 10.8 10.8 Type 2 2 Battery Type Li-Ion Li-Ion No load speed min-1 0–2450 0–2450 Max torque Nm 130 107 Tool holder 3/8" 1/4"
(9.5 mm) (6.35 mm) Weight (without battery pack) kg 0.8 0.8
LPA (sound pressure) dB(A) KPA (sound pressure uncertainty) dB(A) 3 LWA (sound power) dB(A) 99 KWA (sound power uncertainty) dB(A) 3
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a ah
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration
=
Uncertainty K = m/s² 1.7
emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.
h
m/s² 7.5
88
88
3
99
3
7.5
1.7
An estimation of the level of exposure to
Identify additional safety measures to
Battery pack DCB121 DCB123
Battery type Li-Ion Li-Ion Voltage VDC 10.8 10.8 Capacity Ah 1.3 1.5 Weight kg 0.2 0.2
Charger DCB100 DCB105
Mains voltage V Battery type Li-Ion Li-Ion
Approx. min 40 40 30 30 charging (1.3 Ah (1.5 Ah 1.3 Ah (1.5 Ah Time battery battery battery battery packs) packs) packs) packs)
Weight kg 0.3 0.49
Fuses
Europe 230 V tools 10 Amperes, mains U.K. & Ireland 230 V tools 3 Amperes, in plugs
vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
230 230
AC
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently
WARNING: Indicates a potentially
hazardous situation which, if not avoided, will result in death or serious injury.
hazardous situation which, if not avoided, could result in death or serious injury.
26
Page 26
ENGLISH
CAUTION: Indicates a potentially
NOTICE: Indicates a practice not
hazardous situation which, if not avoided, may result in minor or
moderate injury.
related to personal injury which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DCF813, DCF815
DEWALT declares that these products described under Technical Data are in compliance with: 2006/42/EC, EN 60745-1, EN 60745-2-2.
These products also comply with Directive 2004/108/EC. For more information, please contact DEWALT at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of DEWALT.
Horst Grossmann Vice President Engineering and Product Development DEWALT, Richard-Klinger-Straße 11, D-65510, Idstein, Germany
03.03.2010
WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery­operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and
use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
27
Page 27
ENGLISH
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger
on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper
footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
28
e) Maintain power tools. Check for
misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional Specifi c Safety Rules for Impact Wrenches/Drivers
Hold power tool by insulated gripping surfaces when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may
make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Page 28
ENGLISH
Residual Risks
In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are:
– Impairment of hearing. – Risk of personal injury due flying particles. – Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
DATE CODE POSITION
The date code, which also includes the year of manufacture, is printed into the housing surface that forms the mounting joint between tool and battery.
Example:
2011 XX XX
Year of Manufacture
Important Safety Instructions for All Battery Chargers
SAVE THESE INSTRUCTIONS: This manual contains important safety and operating instruc tions for the DCB100 and DCB105 battery chargers.
• Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack.
WARNING: Shock hazard. Do not allow
any liquid to get inside charger. Electric shock may result.
CAUTION: Burn hazard. To reduce
the risk of injury, charge only DEWALT rechargeable batteries. Other types of batteries may burst causing personal injury and damage.
CAUTION: Children should be
supervised to ensure that they do not play with the appliance.
NOTICE: Under certain conditions, with
the charger plugged in to the power supply, the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, grinding dust, metal chips,
steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.
• DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are
specifically designed to work together.
• These chargers are not intended for any uses other than charging DEWALT rechargeable batteries. Any other uses
may result in risk of fire, electric shock or electrocution.
• Do not expose charger to rain or snow.
• Pull by plug rather than cord when disconnecting charger. This will reduce risk
of damage to electric plug and cord.
• Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
• Do not use an extension cord unless it is absolutely necessary. Use of improper
extension cord could result in risk of fire, electric shock, or electrocution.
• Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger
in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.
• Do not operate charger with damaged cord or plug — have them replaced immediately.
Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorised
service centre.
• Do not disassemble charger; take it to an authorised service centre when service or repair is required. Incorrect reassembly may
result in a risk of electric shock, electrocution or fire.
• In case of damaged power supply cord the supply cord must be replaced immediately by the manufacturer, its service agent or similar qualified person to prevent any hazard.
• Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing
the battery pack will not reduce this risk.
29
Page 29
ENGLISH
• NEVER attempt to connect 2 chargers together.
• The charger is designed to operate on standard 230V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular
charger.
SAVE THESE INSTRUCTIONS
Chargers
The DCB100 and DCB105 chargers accept 10.8 V Li-Ion batteries.
These chargers require no adjustment and are designed to be as easy as possible to operate.
Charging Procedure (fi g. 2)
1. Plug the charger (k) into an appropriate outlet before inserting battery pack.
2. Insert the battery pack (f) into the charger. The red (charging) light will blink continuously indicating that the charging process has started.
3. The completion of charge will be indicated by the red light remaining ON continuously. The pack is fully charged and may be used at this time or left in the charger.
NOTE: To ensure maximum performance and life of Li-Ion batteries, charge the battery pack fully before first use.
Charging Process
Refer the table below for the state of charge of the battery pack.
State of charge
charging – – – – fully charged ––––––––––– hot/cold pack delay –– – –– – replace battery pack •••••••••••
Hot/Cold Pack Delay
When the charger detects a battery that is too hot or too cold, it automatically starts a Hot/Cold Pack Delay, suspending charging until the battery has reached an appropriate temperature. The charger then automatically switches to the pack charging mode. This feature ensures maximum battery life.
LI-ION BATTERY PACKS ONLY
Li-Ion batteries are designed with an Electronic Protection System that will protect the battery against overloading, overheating or deep discharge.
The tool will automatically turn off if the Electronic Protection System engages. If this occurs, place the Li-Ion battery on the charger until it is fully charged.
30
Important Safety Instructions for All Battery Packs
When ordering replacement battery packs, be sure to include catalog number and voltage.
The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below. Then follow charging procedures outlined.
READ ALL INSTRUCTIONS
• Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting
or removing the battery from the charger may ignite the dust or fumes.
• Never force battery pack into charger. Do
not modify battery pack in any way to fit into a non-compatible charger as battery pack may rupture causing serious personal injury.
• Charge the battery packs only in DEWALT chargers.
• DO NOT splash or immerse in water or other liquids.
• Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 40 ˚C (105 ˚F) (such as outside sheds or metal buildings in summer).
WARNING: Never attempt to open the
battery pack for any reason. If battery pack case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer, stepped on). Damaged battery packs should be returned to service centre for recycling.
CAUTION: When not in use, place
tool on its side on a stable surface where it will not cause a tripping or falling hazard. Some tools with large
battery packs will stand upright on the battery pack but may be easily knocked over.
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (Li-Ion)
• Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire.
Page 30
Toxic fumes and materials are created when lithium ion battery packs are burned.
• If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the
eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.
• Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If
symptoms persists, seek medical attention.
WARNING: Burn hazard. Battery liquid
may be flammable if exposed to spark or flame.
Battery Pack
BATTERY TYPE
The DCF813 and DCF815 operate on 10.8 V battery packs.
Storage Recommendations
1. The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold. For optimum battery performance and life, store battery packs at room temperature when not in use.
2. For long storage, it is recommended to store a fully charged battery pack in a cool, dry place out of the charger for optimal results.
NOTE: Battery packs should not be stored completely depleted of charge. The battery pack will need to be recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels on the charger and the battery pack show the following pictographs:
Read instruction manual before use.
100%
Battery charging.
100%
Battery charged.
Battery defective.
Hot/cold pack delay.
ENGLISH
Do not probe with conductive objects.
Do not charge damaged battery packs.
Use only with DEWALT battery packs,
others may burst, causing personal injury and damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 ˚C and 40 ˚C.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack.
See Technical Data for charging time.
Only for indoor use.
Package Contents
The package contains: 1 Cordless impact driver or impact wrench 1 Charger 2 Battery packs 1 Impact rated screwdriver bit (DCF815) 1 Kitbox 1 Instruction manual 1 Exploded drawing
NOTE: Battery packs and chargers are not included with N-models.
• Check for damage to the tool, parts or accessories which may have occurred during transport.
• Take the time to thoroughly read and understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or personal injury could result.
31
Page 31
ENGLISH
a. Trigger switch b. Forward/reverse button c. Chuck collar (DCF815) d. 1/4" (6.35 mm) hex quick-release chuck
(DCF815) e. Battery release button f. Battery pack g. Worklight h. Main handle i. Anvil (DCF813) j. Hog ring (DCF813)
INTENDED USE
The impact driver and impact wrench are designed for professional impact fastening applications. The impact function makes this tool particularly useful for driving fasteners in wood, metal and concrete.
DO NOT use under wet conditions or in presence of flammable liquids or gases.
This impact driver and impact wrench are professional power tools. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
Electrical Safety
The electric motor has been designed for one voltage only. Always check that the battery pack voltage corresponds to the voltage on the rating plate. Also make sure that the voltage of your charger corresponds to that of your mains.
Your DEWALT charger is double insulated
in accordance with EN 60335; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by a specially prepared cord available through the DEWALT service organisation.
Mains Plug Replacement (U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 3 A.
WARNING: No connection is to be
made to the earth terminal.
Using an Extension Cable
An extension cord should not be used unless absolutely necessary. Use an approved extension cable suitable for the power input of your charger (see Technical Data). The minimum conductor size is 1.5 mm2; the maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
ASSEMBLY AND ADJUSTMENTS
WARNING: Prior to assembly and
WARNING: Use only DEWALT battery
adjustment, always remove the battery pack. Always switch off the tool before inserting or removing the battery pack.
packs and chargers.
Inserting and Removing the Battery Pack from the Tool (fi g. 3)
WARNING: To reduce the risk
NOTE: Make sure your battery pack (f) is fully charged.
TO INSTALL THE BATTERY PACK INTO THE TOOL HANDLE
1. Align the battery pack with the rails inside the
2. Slide it firmly into place until you hear the lock
TO REMOVE THE BATTERY PACK FROM THE TOOL
1. Press the release button (e) and firmly pull the
2. Insert battery pack into the charger as
of serious personal injury, place the forward/reverse button in the lock-off position or turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories.
handle.
snap into place.
battery pack out of the tool handle.
described in the charger section of this manual.
32
Page 32
ENGLISH
OPERATION Instructions for Use
WARNING: Always observe the safety
instructions and applicable regulations.
WARNING: To reduce the risk
of serious personal injury, place the forward/reverse button in the lock-off position or turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories.
Proper Hand Position (fi g. 1, 5)
WARNING: To reduce the risk of
serious personal injury, ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of
serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction.
Proper hand position requires one hand on the main handle (h).
Variable Speed Trigger Switch (fi g. 1)
To turn the tool on, squeeze the trigger switch (a). To turn the tool off, release the trigger switch. Your tool is equipped with a brake. The chuck will stop when the trigger switch is fully released.
The variable speed switch enables you to start the application at a slow speed. The further you squeeze the trigger, the faster the tool will operate. For maximum tool life, use variable speed only for starting holes or fasteners.
NOTE: Continuous use in variable speed range is not recommended. It may damage the switch and should be avoided.
Forward/Reverse Control Button (fi g. 1)
A forward/reverse control button (b) determines the direction of the tool and also serves as a lock-off button.
To select forward rotation, release the trigger switch and depress the forward/reverse control button on the right side of the tool.
To select reverse, depress the forward/reverse control button on the left side of the tool. The center position of the control button locks the tool in the off position. When changing the position of the control button, be sure the trigger is released.
NOTE: The first time the tool is run after changing the direction of rotation, you may hear a click on start up. This is normal and does not indicate a problem.
Worklights (fi g. 1)
There are three worklights (g) located around the anvil (d, i). The worklights will be activated when the trigger switch is squeezed.
NOTE: The worklights are for lighting the immediate work surface and are not intended to be used as a flashlight.
Anvil with Hog Ring (fi g. 1, 4)
DCF813
CAUTION: Use only impact sockets.
Non-impact sockets may break and cause a hazardous condition. Inspect sock et prior to use to ensure that it con tains no cracks.
Place the forward/reverse button (b) in the locked off (center) position or remove battery pack before changing accessories.
To install a socket on the hog ring anvil, firmly push socket onto the anvil (i). The hog ring (j) compresses to allow the socket to slide on. After the socket is installed, the hog ring applies pressure to help provide socket retention.
To remove a socket, grasp the socket and firmly pull it off.
Quick-Release Chuck (fi g. 1, 4)
DCF815
NOTE: The chuck accepts 1/4" (6.35mm) hex accessories and 1" (25.4mm) bit tips only. Using 1" (25.4mm) bits allows better access in tight spaces.
Place the forward/reverse button (b) in the locked off (center) position or remove battery pack before changing accessories.
To install an accessory, push accessory to fully insert into chuck (d). The chuck collar (c) does not need to be pulled up to lock accessory in place.
To remove an accessory, pull the chuck collar away from the front of the tool. Remove the accessory and release the collar.
Usage
Your impact tool generates the following output torque:
Cat # Ft.-Lbs. In.-Lbs. Nm
DCF813 96 1150 130 DCF815 79 950 107
33
Page 33
ENGLISH
CAUTION: Ensure fastener and/or
system will withstand the level of torque generated by the tool. Excessive torque may cause breakage and possible personal injury.
1. Place the socket on the fastener head. Keep the tool pointed straight at the fastener.
2. Press switch to start operation. Always check torque with a torque wrench, as the fastening torque is affected by many factors including the following:
Voltage: Low voltage, due to a nearly
discharged battery, will reduce fastening torque.
Socket size: Failure to use the correct
socket size will cause a reduction in fastening torque.
Bolt Size: Larger bolt diameters generally
require higher fastening torque. Fastening torque will also vary according to length, grade, and torque coefficient.
Bolt: Ensure that all threads are free of rust
and other debris to allow proper fastening torque.
Material: The type of material and surface
finish of the material will affect fastening torque.
Fastening Time: Longer fasten ing time
results in increased fastening torque. Using a longer fastening time than recom mended could cause the fasteners to be overstressed, stripped or damaged.
MAINTENANCE
Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk
of serious personal injury, place the forward/reverse button in the lock-off position or turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories.
The charger and battery pack are not serviceable. There are no serviceable parts inside.
Cleaning
WARNING: Blow dirt and dust out of
CHARGER CLEANING INSTRUCTIONS
the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before cleaning. Dirt and grease may be removed from the exterior of the charger using a cloth or soft non-metallic brush. Do not use water or any cleaning solutions.
Optional Accessories
WARNING: Since accessories, other
Consult your dealer for further information on the appropriate accessories.
than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT, recommended accessories should be used with this product.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal household waste.
Should you find one day that your DEWALT product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.
Lubrication
Your power tool requires no additional lubrication.
34
Page 34
ENGLISH
Separate collection of used products and
packaging allows materials to be recycled and used again. Re-use of
recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
EWALT provides a facility for the collection and
D recycling of DEWALT products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by contacting your local DEWALT office at the address indicated in this manual. Alternatively, a list of authorised DEWALT repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails to produce sufficient power on jobs which were easily done before. At the end of its technical life, discard it with due care for our environment:
• Run the battery pack down completely, then remove it from the tool.
• Li-Ion cells are recyclable. Take them to your dealer or a local recycling station. The collected battery packs will be recycled or disposed of properly.
GUARANTEE
DEWALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your D return it within 30 days, complete with all original components, as purchased, to the point of purchase, for a full refund or exchange. The product must have been subject to fair wear and tear and proof of purchase must be produced.
ONE YEAR FREE SERVICE CONTRACT
If you need maintenance or service for your
EWALT tool, in the 12 months following
D purchase, you are entitled to one service free of charge. It will be undertaken free of charge at an authorised DEWALT repair agent. Proof of purchase must be produced. Includes labour. Excludes accessories and spare parts unless failed under warranty.
ONE YEAR FULL WARRANTY
EWALT product becomes defective
If your D due to faulty materials or workmanship within 12 months from the date of purchase, DEWALT guarantees to replace all defective parts free of charge or – at our discretion – replace the unit free of charge provided that:
• The product has not been misused;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorised persons;
• Proof of purchase is produced;
• The product is returned complete with all original components.
If you wish to make a claim, contact your seller or check the location of your nearest authorised DEWALT repair agent in the DEWALT catalogue or contact your DEWALT office at the address indicated in this manual. A list of authorised DEWALT repair agents and full details of our after-sales service is available on the Internet at: www.2helpU.com.
EWALT tool, simply
35
Page 35
153
Page 36
Belgique et Black & Decker - DEWALT Dutch Tel: 32 70 220 063 Fax: 32 70 225 585 Luxembourg Nieuwlandlaan 7, IZ Aarschot B156 French Tel: 32 70 220 062 Fax: 32 70 222 441 België en B-3200 Aarschot www.dewalt.be Luxemburg
Danmark D
EWALT Tlf: 70201511
Sluseholmen 2-4 Fax: 70224910 2450 København SV www.dewalt.dk
Deutschland D
EWALT Tel: 06126-21-1
Richard Klinger Str. 11 Fax: 06126-21-2770 65510 Idstein www.dewalt.de
Ελλάς Black & Decker (Ελλάς) Α.Ε. Τηλ : 30 210 8981-616 www.dewalt.gr
Στράβωνος 7 & Βουλιαγμένης 159 Service: 30 210 8981-616 Γλυφάδα 16674, Αθήνα Φαξ: 30 210 8983-570
España D
EWALT Tel: 934 797 400
Parque de Negocios “Mas Blau” Fax: 934 797 419 Edificio Muntadas, c/Bergadá, 1, Of. A6 www.dewalt.es 08820 El Prat de Llobregat (Barcelona)
France D
EWALT Tel: 04 72 20 39 20
5, allée des hêtres Fax: 04 72 20 39 00 BP 30084, 69579 Limonest Cedex www.dewalt.fr
Schweiz D
EWALT Tel: 01 - 730 67 47
Suisse In der Luberzen 40 Fax: 01 - 730 70 67 Svizzera 8902 Urdorf www.dewalt.ch
Ireland D
EWALT Tel: 00353-2781800
Calpe House Rock Hill Fax: 00353-2781811 Black Rock, Co. Dublin www.dewalt.ie
Italia D
EWALT Tel: 800-014353
c/o Energypark Building 03 sud, Via Monza 7/A, Fax: 39 039 9590 317 20871 Vimercate (MB), IT www.dewalt.it
Nederlands Black & Decker - D
EWALT Tel: 31 164 283 063
Joulehof 12 Fax: 31 164 283 200 4600 AB Bergen Op Zoom www.dewalt.nl
Norge D
EWALT Tel: 45 25 13 00
Postboks 4613, Nydalen Fax: 45 25 08 00 0405 Oslo www.dewalt.no
Österreich D
EWALT Tel: 01 - 66116 - 0
Werkzeug Vertriebsges m.b.H Fax: 01 - 66116 - 14 Oberlaaerstrasse 248 www.dewalt.at A-1230 Wien
Portugal D
EWALT Tel: 214 66 75 00
Centro de Escritórios de Sintra Avenida Almirante Fax: 214 66 75 75 Gago Coutinho, 132/134, Edifício 142710-418 Sintra www.dewalt.pt 2710-418 Lisboa
Suomi D
EWALT Puh: 010 400 430
Tekniikantie 12 Faksi: 0800 411 340 02150 Espoo, Finland www.dewalt.fi
Sverige D
EWALT Tel: 031 68 61 00
Box 94 Fax: 031 68 60 08 431 22 Mölndal www.dewalt.se
Türkiye
KALE Hırdavat ve Makina A.Ş. Tel: 0212 533 52 55
Defterdar Mah. Savaklar Cad. No:15 Faks: 0212 533 10 05 Edirnekapı / Eyüp / İSTANBUL 34050 TÜRKİYE www.dewalt.com.tr
United D
EWALT Tel: 01753-56 70 55 www.dewalt.co.uk
Kingdom 210 Bath Road; Slough, Berks SL1 3YD Fax: 01753-57 21 12 Middle East D
EWALT Tel: 971 4 8863030
Africa P.O. Box - 17164, Fax: 971 4 8863333 Jebel Ali (South Zone), Dubai, UAE www.dewalt.ae
N150327 12/11
Loading...