DeWalt DCD732, DCD795, DCD737, DCD790 Original Instructions Manual
DCD732
DCD737
DCD790
DCD795
FINAL PRINT SIZE: A5 (148 x 210 mm)
B
Copyright
DeWALT
English (original instructions) 3
1
FIG. 1
I
K
J
H
FIG. 2
K
J
L
A
B
C
D
F
G
H
E
DCD795
2
FIG. 3
FIG. 7
C
C
F
FIG. 4 FIG. 5 FIG. 6
FIG. 8 FIG. 9
M
N
English (original instructions)
English
3
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough product development and innovation make
DeWALT one of the most reliable partners for professional power tool users.
Technical Data
DCD732 DCD737 DCD790 DCD795
Voltage VDC 14.4 14.4 18 18
Type 2/11 2/11 2/11 2/11
Battery Type Li-Ion Li-Ion Li-Ion Li-Ion
Power output W 310 310 360 360
No-load speed
1st gear min-1 0–550 0–550 0–600 0–600
2nd gear min-1 0–2000 0–2000 0–2000 0–2000
Impact rate
1st gear min-1 – 0–9500 – 0–10200
2nd gear min-1 – 0–33200 – 0–34000
Max. torque (hard/soft) Nm 57/19 57/19 60/23 60/23
Chuck capacity mm 1.5–13.0 1.5–13.0 1.5–13.0 1.5–13.0
Maximum drilling capacity
Wood mm 38 38 38 38
Metal mm 13 13 13 13
Masonry mm – 13 – 13
Weight (without battery pack) kg 1.20 1.27 1.20 1.27
Noise values and vibration values (triax vector sum) according to EN60745-2-1, EN60745-2-2:
LPA (emission sound pressure level) dB(A)
76 90 76 90
LWA (sound power level) dB(A)
87 101 87 101
K (uncertainty for the given sound level) dB(A)
3 3 3 3
Drilling into metal
Vibration emission value a
h,D
=
m/s²
2.8 3.3 2.8 3.3
Uncertainty K = m/s²
1.5 1.5 1.5 1.5
Drilling into concrete
Vibration emission value a
h,ID
=
m/s²
– 23 – 23
Uncertainty K = m/s²
– 1.5 – 1.5
Screwdriving
Vibration emission value ah =
m/s²
<2.5 <2.6 <2.5 <2.6
Uncertainty K = m/s²
1.5 1.5 1.5 1.5
BRUSHLESS CORDLESS COMPACT 13 mm (1/2")
DRILL/DRIVER, DCD732, DCD790
BRUSHLESS CORDLESS COMPACT 13 mm (1/2")
DRILL/DRIVER/HAMMERDRILL, DCD737, DCD795
English (original instructions)
4
English
Charger DCB105
Mains voltage V
AC
230
Battery type 10.8/14.4/18 Li-Ion
Approx. charging time
of battery packs
min 25 (1.3 Ah) 30 (1.5 Ah) 40 (2.0 Ah)
55 (3.0 Ah) 70 (4.0 Ah) 90 (5.0 Ah)
Weight kg 0.49
Charger DCB107
Mains voltage V
AC
230
Battery type 10.8/14.4/18 Li-Ion
Approx. charging time
of battery packs
min 60 (1.3 Ah) 70 (1.5 Ah) 90 (2.0 Ah)
140 (3.0 Ah) 185 (4.0 Ah) 240 (5.0 Ah)
Weight kg 0.29
Charger DCB112
Mains voltage V
AC
230
Battery type 10.8/14.4/18 Li-Ion
Approx. charging time
of battery packs
min 40 (1.3 Ah) 45 (1.5 Ah) 60 (2.0 Ah)
90 (3.0 Ah) 120 (4.0 Ah) 150 (5.0 Ah)
Weight kg 0.36
Charger DCB113
Mains voltage V
AC
230
Battery type 10.8/14.4/18 Li-Ion
Approx. charging time
of battery packs
min 30 (1.3 Ah) 35 (1.5 Ah) 50 (2.0 Ah)
70 (3.0 Ah) 100 (4.0 Ah) 120 (5.0 Ah)
Weight kg 0.4
Charger DCB115
Mains voltage V
AC
230
Battery type 10.8/14.4/18 Li-Ion
Approx. charging time
of battery packs
min 25 (1.3 Ah) 30 (1.5 Ah) 40 (2.0 Ah)
55 (3.0 Ah) 70 (4.0 Ah) 90 (5.0 Ah)
Weight kg 0.5
Fuses:
Europe 230V tools 10 Amperes, mains
U.K. & Ireland 230V tools 3 Amperes, in plugs
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off or
when it is running but not actually doing
the job. This may significantly reduce
the exposure level over the total working
period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Battery pack DCB140 DCB141 DCB142
Battery type Li-Ion Li-Ion Li-Ion
Voltage V
DC
14.4 14.4 14.4
Capacity Ah 3.0 1.5 4.0
Weight kg 0.53 0.30 0.54
Battery pack DCB143 DCB144 DCB145
Battery type Li-Ion Li-Ion Li-Ion
Voltage V
DC
14.4 14.4 14.4
Capacity Ah 2.0 5.0 1.3
Weight kg 0.30 0.52 0.30
Battery pack DCB180 DCB181 DCB182
Battery type Li-Ion Li-Ion Li-Ion
Voltage V
DC
18 18 18
Capacity Ah 3.0 1.5 4.0
Weight kg 0.64 0.35 0.61
Battery pack DCB183/B DCB184/B DCB185
Battery type Li-Ion Li-Ion Li-Ion
Voltage V
DC
18 18 18
Capacity Ah 2.0 5.0 1.3
Weight kg 0.40/0.45 0.62/0.67 0.35
Loading...