DeWalt DCB104 Original Instructions Manual

DCB104

B

Copyright

DEWALT

English (original instructions) 2

1

Fig. A

Fig. B

1

2

5

6

4

3

6

4

7

2

ENGLISH

If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the

DEWALT

serviceorganisation.

Mains Plug Replacement
(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the oldplug.

• Connect the brown lead to the live terminal in theplug.

• Connect the blue lead to the neutralterminal.



WARNING: No connection is to be made to the
earthterminal.

Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5A.

Using an Extension Cable

If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this charger (see
Technical Data). The minimum conductor size is 1mm2; the
maximum length is30m.

When using a cable reel, always unwind the cablecompletely.

Important Safety Instructions for All Battery
Chargers

SAVE THESE INSTRUCTIONS: This manual contains important
safety and operating instructions for compatible battery
chargers (refer to TechnicalData).

• Before using charger, read all instructions and cautionary
markings on charger, battery pack, and product using
batterypack.



WARNING: Shock hazard. Do not allow any liquid to get
inside charger. Electric shock mayresult.



WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA orless.



CAUTION: Burn hazard. To reduce the risk of injury,
charge only

DEWALT

rechargeable batteries. Other types of

batteries may burst causing personal injury anddamage.



CAUTION: Children should be supervised to ensure that
they do not play with theappliance.

NOTICE: Under certain conditions, with the charger
plugged into the power supply, the exposed charging
contacts inside the charger can be shorted by foreign
material. Foreign materials of a conductive nature such
as, but not limited to, steel wool, aluminum foil or any
buildup of metallic particles should be kept away from
charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the cavity.
Unplug charger before attempting to clean

• DO NOT attempt to charge the battery pack with any
chargers other than the ones in this manual. The charger
and battery pack are specifically designed to worktogether.

Congratulations!

You have chosen a

DEWALT

tool. Years of experience, thorough

product development and innovation make

DEWALT

one of the

most reliable partners for professional power toolusers.

Technical Data

DCB104

GB

DCB104

LX

Voltage V

DC

10.8, 12, 14.4, 18

Mains voltage V

AC

230 115

Type 1 1

Battery type Li-Ion Li-Ion

Charger current
Input
Output

A
A

3.5

8.0

7.0

8.0

Weight (without battery packs) kg 2.9 2.9

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.



DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.



WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.



CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or

moderateinjury.
NOTICE: Indicates a practice not related to

personal injury which, if not avoided, may result in
propertydamage.



Denotes risk of electricshock.



Denotes risk offire.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTUREREFERENCE.

Electrical Safety

The electric motor has been designed for one voltage only.
Always check that the battery pack voltage corresponds to the
voltage on the rating plate. Also make sure that the voltage of
your charger corresponds to that of yourmains.

Your

DEWALT

charger is double insulated in
accordance with EN60335; therefore no earth wire
isrequired.

FOUR-PORT LITHIUM-ION FAST CHARGER
DCB104

3

ENGLISH

• These chargers are not intended for any uses other than
charging

DEWALT

rechargeable batteries. Any other uses

may result in risk of fire, electric shock orelectrocution.

• Do not expose charger to rain orsnow.

• Pull by plug rather than cord when disconnecting
charger. This will reduce risk ofdamage to electric plug
andcord.

• Make sure that cord is located so that it will not be

stepped on, tripped over, or otherwise subjected to
damage orstress.

• Do not use an extension cord unless it is absolutely
necessary. Use of improper extension cord could result in risk

of fire,electric shock, orelectrocution.

• Do not place any object on top of charger or place

the charger on a soft surface that might block the
ventilation slots and result in excessive internal heat.

Place the charger in a position away from any heat source. The
charger is ventilated through slots in the top and the bottom
of thehousing.

• Do not operate charger with damaged cord or plug—
have them replacedimmediately.

• Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way. Take it
to an authorised servicecentre.

• Do not disassemble charger; take it to an authorised
service centre when service or repair is required. Incorrect
reassembly may result in a risk of electric shock, electrocution
orfire.

• In case of damaged power supply cord the supply cord must
be replaced immediately by the manufacturer, its service agent
or similar qualified person to prevent anyhazard.

• Disconnect the charger from the outlet before

attempting any cleaning. This will reduce the risk of
electric shock. Removing the battery pack will not reduce

thisrisk.

• NEVER attempt to connect two chargerstogether.

• The charger is designed to operate on standard

230V household electrical power. Do not attempt to
use it on any other voltage. This does not apply to the

vehicularcharger.

Battery Packs

Important Safety Instructions for All Battery Packs

When ordering replacement battery packs, be sure to include
catalogue number andvoltage.

The battery pack is not fully charged out of the carton. Before
using the battery pack and charger, read the safety instructions
below. Then follow charging proceduresoutlined.

READ ALL INSTRUCTIONS

• Do not charge or use battery in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Inserting or removing the battery from the charger may

ignite the dust orfumes.

• Never force battery pack into charger. Do not modify

battery pack in any way to fit into a non-compatible

Batteries Chargers/Charge Times (Minutes)

Cat # V

DC

Ah

Weight

kg

DCB104 DCB107 DCB112 DCB113 DCB115 DCB118 DCB132 DCB119

DCB546 18/54 6.0/2.0 1.05 60 270 170 140 90 60 90 X
DCB547 18/54 9.0/3.0 1.46 75* 420 270 220 135* 75* 135* X
DCB548 18/54 12.0/4.0 1.44 120 540 350 300 180 120 180 X
DCB181 18 1.5 0.35 22 70 45 35 22 22 22 45

DCB182 18 4.0 0.61 60/40** 185 120 100 60 60/40** 60 120
DCB183/B 18 2.0 0.40 30 90 60 50 30 30 30 60
DCB184/B 18 5.0 0.62 75/50** 240 150 120 75 75/50** 75 150

DCB185 18 1.3 0.35 22 60 40 30 22 22 22 X

DCB187 18 3.0 0.54 45 140 90 70 45 45 45 90

DCB189 18 4.0 0.54 60 185 120 100 60 60 60 120

DCB141 14.4 1.5 0.30 22 70 45 35 22 X 22 45

DCB142 14.4 4.0 0.54 60 185 120 100 60 X 60 120

DCB143 14.4 2.0 0.30 30 90 60 50 30 X 30 60

DCB144 14.4 5.0 0.52 75 240 150 120 75 X 75 150

DCB145 14.4 1.3 0.30 22 60 40 30 22 X 22 40

DCB122 12 2.0 0.20 30 90 60 50 30 X 30 60

DCB124 12 3.0 0.25 45 140 90 70 45 45 45 90

DCB125 12 1.3 0.20 22 60 40 30 22 X 22 40

DCB127 12 2.0 0.20 30 90 60 50 30 X 30 60

*Date code 201811475B or later
**Date code 201536 or later

4

ENGLISH

charger as battery pack may rupture causing serious
personalinjury.

• Charge the battery packs only in

DEWALT

chargers.

• DO NOT splash or immerse in water or otherliquids.

• Do not store or use the tool and battery pack in

locations where the temperature may reach or exceed
40 ˚C (104 ˚F) (such as outside sheds or metal buildings
in summer).

• Do not incinerate the battery pack even if it is severely
damaged or is completely worn out. The battery pack can

explode in a fire. Toxic fumes and materials are created when
lithium-ion battery packs areburned.

• If battery contents come into contact with the skin,
immediately wash area with mild soap and water. If
battery liquid gets into the eye, rinse water over the open eye
for 15 minutes or until irritation ceases. If medical attention
is needed, the battery electrolyte is composed of a mixture of
liquid organic carbonates and lithiumsalts.

• Contents of opened battery cells may cause respiratory
irritation. Provide fresh air. If symptoms persists, seek
medicalattention.



WARNING: Burn hazard. Battery liquid may be flammable
if exposed to spark orflame.



WARNING: Never attempt to open the battery pack for
any reason. If battery pack case is cracked or damaged,
do not insert into charger. Do not crush, drop or damage
battery pack. Do not use a battery pack or charger that
has received a sharp blow, been dropped, run over or
damaged in any way (i.e., pierced with a nail, hit with
a hammer, stepped on). Electric shock or electrocution
may result. Damaged battery packs should be returned to
service centre forrecycling.



WARNING: Fire hazard. Do not store or carry the
battery pack so that metal objects can contact
exposed battery terminals. For example, do not place

the battery pack in aprons, pockets, tool boxes, product kit
boxes, drawers, etc., with loose nails, screws, keys,etc.



CAUTION: When not in use, place tool on its side on
a stable surface where it will not cause a tripping
or falling hazard. Some tools with large battery packs

will stand upright on the battery pack but may be easily
knockedover.

Transportation



WARNING: Fire hazard. Transporting batteries can
possibly cause fire if the battery terminals inadvertently
come in contact with conductive materials. When
transporting batteries, make sure that the battery
terminals are protected and well insulated from materials
that could contact them and cause a shortcircuit.
NOTE: Lithium-ion batteries should not be put in
checkedbaggage.

DEWALT

batteries comply with all applicable shipping
regulations as prescribed by industry and legal standards which
include UN Recommendations on the Transport of Dangerous
Goods; International Air Transport Association (IATA) Dangerous

Goods Regulations, International Maritime Dangerous Goods
(IMDG) Regulations, and the European Agreement Concerning
The International Carriage of Dangerous Goods by Road (ADR).
Lithium-ion cells and batteries have been tested to section 38.3
of the UN Recommendations on the Transport of Dangerous
Goods Manual of Tests andCriteria.

In most instances, shipping a

DEWALT

battery pack will be
excepted from being classified as a fully regulated Class 9
Hazardous Material. In general, only shipments containing a
lithium-ion battery with an energy rating greater than 100 Watt
Hours (Wh) will require being shipped as fully regulated Class 9.
All lithium-ion batteries have the Watt Hour rating marked on
the pack. Furthermore, due to regulation complexities,

DEWALT

does not recommend air shipping lithium-ion battery packs
alone regardless of Watt Hour rating. Shipments of tools with
batteries (combo kits) can be air shipped as excepted if the Watt
Hour rating of the battery pack is no greater than 100Whr.

Regardless of whether a shipment is considered excepted
or fully regulated, it is the shipper's responsibility to consult
the latest regulations for packaging, labeling/marking and
documentationrequirements.

The information provided in this section of the manual is
provided in good faith and believed to be accurate at the time
the document was created. However, no warranty, expressed or
implied, is given. It is the buyer’s responsibility to ensure that its
activities comply with the applicableregulations.

Transporting the FLEXVOLTTM Battery

The

DEWALT

FLEXVOLTTM battery has two modes: Use

andTransport.
Use Mode: When the FLEXVOLTTM battery stands alone or is in

a

DEWALT

18V product, it will operate as an 18V battery. When
the FLEXVOLTTM battery is in a 54V or a 108V (two 54V batteries)
product, it will operate as a 54Vbattery.

Transport Mode: When the cap is attached to the FLEXVOLTTM
battery, the battery is in Transport mode. Keep the cap for
shipping.

When in Transport mode, strings
of cells are electrically
disconnected within the pack
resulting in 3 batteries with a
lower Watt hour (Wh) rating as compared to 1 battery with a
higher Watt hour rating. This increased quantity of 3 batteries
with the lower Watt hour rating can exempt the pack from
certain shipping regulations that are imposed upon the higher
Watt hour batteries.

For example, the Transport
Wh rating might indicate
3x36 Wh, meaning 3
batteries of 36 Wh each.
The Use Wh rating might
indicate 108Wh (1battery implied).

Storage Recommendations

1. The best storage place is one that is cool and dry away
from direct sunlight and excess heat or cold. For optimum
battery performance and life, store battery packs at room
temperature when not inuse.

Example of Use and Transport Label Marking

5

ENGLISH

2. For safe storage, the electrical cord can be wrapped around
the two cord wraps

3

. Tuck the end of the cord into itself so

it won't comeundone.

3. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimalresults.

NOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be recharged
beforeuse.

Labels on Charger and Battery Pack

In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:

Read instruction manual beforeuse.

See Technical Data for chargingtime.

Do not probe with conductiveobjects.

Do not charge damaged batterypacks.

Do not expose to water.

Have defective cords replacedimmediately.

Charge only between 4 ˚C and 40 ˚C.

Only for indooruse.

Discard the battery pack with due care for
theenvironment.

Charge

DEWALT

battery packs only with designated

DEWALT

chargers. Charging battery packs other

than the designated

DEWALT

batteries with a

DEWALT

charger may make them burst or lead to

other dangeroussituations.

Do not incinerate the batterypack.

USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).

TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3batteries of 36 Wh).

Package Contents

The package contains:
1 Battery charger
1 Instruction manual

• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.

• Take the time to thoroughly read and understand this manual
prior tooperation.

Markings on Charger

The following pictograms are shown on the tool:

Read instruction manual beforeuse.

Visible radiation. Do not stare intolight.

Date Code Position (Fig. A)

The date code

7

, which also includes the year of manufacture,

is printed on the bottom of thecharger.
Example:

2018 XX XX

Year of Manufacture

Description (Fig. A)



WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.

1

Battery pack

2

Battery release button

3

Cord wraps

4

DEWALT

Tool Tag fasteners and holes

5

ToughSystem®-Compatible side rails

6

Mounting holes

Intended Use

The DCB104 charger is designed for charging 10.8V, 12V, 14,4V,
18V XR battery packs (DCB122, DCB124, DCB125, DCB127,
DCB141, DCB142, DCB143, DCB144, DCB145, DCB181, DCB182,
DCB183, DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189,
DCB546, DCB547, DCB548).

DO NOT use under wet conditions or in the presence of
flammable liquids orgases.

These battery chargers and battery packs are professionaltools.
DO NOT let children come into contact with the tool.

Supervision is required when inexperienced operators use
thistool.

• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
withoutsupervision.

• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.

ASSEMBLY



WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from power
source before making any adjustments or removing/

6

ENGLISH

76mm long, with a screw head diameter of 8–9.5mm, screwed
into wood through the mounting holes

6

.

OPERATION

DEWALT

chargers require no adjustment and are designed to be

as easy as possible tooperate.

Charging a Battery (Fig. A)

1. Plug the charger into an appropriate outlet before inserting
batterypack.

2. Insert the battery pack

1

into the charger, making sure the
battery pack is fully seated in the charger. The red (charging)
light will blink repeatedly indicating that the charging
process hasstarted.

3. The completion of charge will be indicated by the red
light remaining ON continuously. The battery pack is fully
charged and may be used at this time or left in the charger.
To remove the battery pack from the charger, push the
battery release button

2

on the batterypack.

NOTE: To ensure maximum performance and life of lithium-ion
battery packs, charge the battery pack fully before firstuse.

Charger Operation

Refer to the indicators below for the charge status of the
batterypack.

Charge Indicators

Charging

Fully Charged

Hot/Cold Pack Delay*

* The red light will continue to blink, but a yellow indicator light

will be illuminated during this operation. Once the battery pack
has reached an appropriate temperature, the yellow light will
turn off and the charger will resume the chargingprocedure.

The compatible charger(s) will not charge a faulty battery pack.
The charger will indicate faulty battery by refusing tolight.

NOTE: This could also mean a problem with acharger.
If the charger indicates a problem, take the charger and battery

pack to be tested at an authorised servicecentre.

Hot/Cold Pack Delay

When the charger detects a battery pack that is too hot or too
cold, it automatically starts a Hot/Cold Pack Delay, suspending
charging until the battery pack has reached an appropriate
temperature. The charger then automatically switches to the
pack charging mode. This feature ensures maximum battery
packlife.

A cold battery pack will charge at a slower rate than a warm
battery pack. The battery pack will charge at that slower rate
throughout the entire charging cycle and will not return to
maximum charge rate even if the battery packwarms.

Electronic Protection System

XR Li-Ion tools are designed with an Electronic Protection
System that will protect the battery pack against overloading,
overheating or deepdischarge.

installing attachments or accessories. An accidental
start-up can causeinjury.

Attaching the Charger to the

DEWALT

ToughSystem® (Fig. A, B)



WARNING: To reduce the risk of serious personal
injury, always mount the charger to the top of the

DEWALT

ToughSystem®. Never mount anything on top

of thecharger.

To attach the charger to the ToughSystem®:

1. Disconnect the charger from theoutlet.

2. Place charger on top of a ToughSystem® box, aligning the

side rails

5

to the side latches. Secure using the side latch

anchors asshown.

NOTE: The charger must be the top-most item.
Always transport a stacked load with a ToughSystem® cart or, if

necessary, carry using the handles of the bottom mostbox.



WARNING: Never pick up a ToughSystem® stack by the
handles on the charger.

When not mounted to the

DEWALT

ToughSystem®, the charger

should be placed on a flat surface with battery pack ports
facingup.



WARNING: Always disconnect the charger from the outlet
and store cord using the cord wraps before mounting
to or dismounting from the ToughSystem®, and before
transporting the ToughSystem®.

DEWALT

Bluetooth® Tool Tag Ready (Fig.A)

Optional Accessory



WARNING: Read instruction manual for the

DEWALT

Bluetooth® ToolTag.



WARNING: Unplug the charger before installing the

DEWALT

Bluetooth® ToolTag.



WARNING: When installing or replacing the

DEWALT

Bluetooth® Tool Tag, use only the screws provided. Be sure
to securely tighten thescrews.

Your charger comes with mounting holes

4

and fasteners for

installing a

DEWALT

Bluetooth® Tool Tag (DCE041). You will

need a T15 bit tip to install the tag. The

DEWALT

Tool Tag is
designed for tracking and locating professional power tools,
equipment, and machines using the

DEWALT

Tool Connect™

app. For proper installation of the

DEWALT

Tool Tag refer to the

DEWALT

Tool Tagmanual. To learn morevisit:

www.dewalt.com/en-us/jobsite-solutions/tool-connect
NOTE: The Bluetooth® word mark and logos are registered

trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by

DEWALT

is under license. Other trademarks and

trade names are those of their respectiveowners.

Wall Mounting

This charger is designed to be wall mountable or to sit upright
on a table or work surface. If wall mounting, locate the charger
within reach of an electrical outlet, and away from a corner
or other obstructions which may impede air flow. Mount the
charger securely using screws (purchased separately) at least

7

ENGLISH

The tool will automatically turn off if the Electronic Protection
System engages. If this occurs, place the lithium-ion battery
pack on the charger until it is fullycharged.

Important Charging Notes

1. Longest life and best performance can be obtained if the
battery pack is charged when the ambient temperature
is between 18° – 24°C. DO NOT charge the battery pack
in an air temperature below 4.5°C, or above 40°C. This
is important and will prevent serious damage to the
batterypack.

2. The charger and battery pack may become warm to the
touch while charging. This is a normal condition, and does
not indicate a problem. To facilitate the cooling of the
battery pack after use, avoid storing the charger or battery
pack in a warmenvironment.

3. The DCB104 battery charger is equipped with an internal
fan designed to cool the charger. The fan will turn on
automatically when the charger needs to be cooled. Never
operate the charger if the fan does not operate properly or if
ventilation slots are blocked. Do not permit foreign objects
to enter the interior of thecharger.

4. If the battery pack does not charge properly:

a. Check operation of socket by plugging in a lamp or

otherappliance;

b. Move the charger and battery pack to a location where

the ambient air temperature is approximately 18° – 24°C;

c. If charging problems persist, take the tool, battery pack

and charger to your local servicecenter.

5. The battery pack should be recharged when it fails to
produce sufficient power on jobs which were easily
done previously. DO NOT CONTINUE to use under these
conditions. Follow the charging procedure. You may also
charge a partially used pack whenever you desire with no
adverse effect on the batterypack.

6. Foreign materials of a conductive nature such as, but not
limited to, grinding dust, metal chips, steel wool, aluminum
foil, or any buildup of metallic particles should be kept away
from charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the cavity.
Unplug the charger before attempting toclean.

7. Do not freeze or immerse the charger in water or any
otherliquid.

MAINTENANCE

Your

DEWALT

power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regularcleaning.



WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental

start-up can causeinjury.

The charger and battery pack are notserviceable.

Lubrication

Your power tool requires no additionallubrication.

Cleaning



WARNING: Shock hazard. Disconnect the charger
from the AC outlet before cleaning. Dirt and grease

may be removed from the exterior of the charger using a
cloth or soft non-metallic brush. Do not use water or any
cleaning solutions. Never let any liquid get inside the tool;
never immerse any part of the tool into aliquid.



WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing thisprocedure.



WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the charger. These
chemicals may weaken the materials used in theseparts.

Optional Accessories



WARNING: Since accessories, other than those offered
by

DEWALT

, have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only

DEWALT

recommended

accessories should be used with thisproduct.

Consult your dealer for further information on the
appropriateaccessories.

Protecting the Environment

Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
householdwaste.

Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.

Rechargeable Battery Pack

This long life battery pack must be recharged when it fails
to produce sufficient power on jobs which were easily done
before. At the end of its technical life, discard it with due care for
our environment:

• Run the battery pack down completely, then remove it from

thetool.

• Li-Ion cells are recyclable. Take them to your dealer or a

local recycling station. The collected battery packs will be
recycled or disposed ofproperly.

8

9

Belgique et
Luxembourg België en Luxemburg

DEWALT - Belgium BVBA
Egide Walschaertsstraat 16
2800 Mechelen

Tel: NL 32 15 47 37 63
Tel: FR 32 15 47 37 64
Fax: [phone]

www.dewalt.be
[e-mail]

Danmark DEWALT (Stanley Black&Decker AS)

Roskildevej 22
2620 Albertslund

Tel: [phone]
Fax: [phone]

www.dewalt.dk
[e-mail]

Deutschland DEWALT

Richard Klinger Str. 11
65510 Idstein

Tel: [phone]
Fax: [phone]

www.dewalt.de
[e-mail]

Ελλάς DEWALT (Ελλάς) Α.Ε.

EΔΡΑ-ΓΡΑΦΕΙΑ : Στράβωνος 7
& Λ. Βουλιαγμένης, Γλυφάδα 166 74, Αθήνα
SERVICE : Ημερος Τόπος 2 (Χάνι Αδάμ) – 193 00 Ασπρόπυργος

Τηλ: 00302108981616
Φαξ: 00302108983570

www.dewalt.gr
[e-mail]

España DEWALT Ibérica, S.C.A.

Parc de Negocios “Mas Blau”
Edificio Muntadas, c/Bergadá, 1, Of. A6
08820 El Prat de Llobregat (Barcelona)

Tel: [phone]
Fax: [phone]

www.dewalt.es
[e-mail]

France DEWALT (Stanley Black & Decker France SAS)

62 Chemin de la Bruyère
CS 60105,
69574 DARDILLY Cedex

Tel: [phone]
Fax: [phone]

www.dewalt.fr
[e-mail]

Schweiz
Suisse
Svizzera

DEWALT
In der Luberzen 42
8902 Urdorf

Tel: 044 - 755 60 70
Fax: 044 - 730 70 67

www.dewalt.ch
[e-mail]

Ireland DEWALT

Building 4500, Kinsale Road
Cork Airport Business Park
Cork, Ireland

Tel: [phone]
Fax: [phone]

www.dewalt.ie
[e-mail]

Italia DEWALT

via Energypark 6
20871 Vimercate (MB), IT

Tel: [phone]
39 039-9590200
Fax: [phone]

www.dewalt.it

Nederlands DEWALT

Netherlands BVPostbus 83,
6120 AB BORN

Tel: [phone]
Fax: [phone]

www.dewalt.nl

Norge DEWALT

Postboks 4613
0405 Oslo, Norge

Tel: [phone]
Fax: [phone]

www.dewalt.no
[e-mail]

Österreich DEWALT

Werkzeug Vertriebsges m.b.H
Oberlaaerstrasse 248, A-1230 Wien

Tel: 01 - 66116 - 0
Fax: 01 - 66116 - 614

www.dewalt.at
[e-mail]

Portugal DEWALT

Ed. D Dinis, Quina da Fonte
Rua dos Malhoes 2 2A 2º Esq.
Oeiras e S. Juliao da Barra, paço de Arcos e Caxias
2770 071 Paço de Arcos

Tel: [phone]
Fax: [phone]

www.dewalt.pt
[e-mail]

Suomi DEWALT

PL47
00521 Helsinki, Suomi

Puh: 010 400 4333
Faksi: 0800 411 340

www.dewalt.fi
[e-mail]

Sverige DEWALT

BOX 94
43122 Mölndal
Sverige

Tel: [phone]
Fax: [phone]

www.dewalt.se
[e-mail]

Türkiye

Sanayi ve Ticareet Bakanlığı tebliğince kullanim ömrü 7 yıldır.
Stanley Black & Decker Turkey Alet Üretim San. Tic. Ltd.Şti.
AND Kozyataği - İçerenköy Mah. Umut Sok. AND Ofis Sit. No: 10-12 / 82-83-84
Ataşehir/İstanbul, Türkiye

Tel: [phone]
Faks: [phone]

www.dewalt.com.tr
[e-mail]

United Kingdom DEWALT, 270 Bath Road;

Slough, Berks SL1 4YD

Tel: [phone]
Fax: [phone]

www.dewalt.co.uk
[e-mail]

Australia DEWALT

810 Whitehorse Road Box Hill
VIC 3128 Australia

Tel: Aust 1800 338 002
Tel: NZ 0800 339 258

www.dewalt.com.au
www.dewalt.co.nz

Middle East Africa DEWALT

P.O. Box - 17164,
Jebel Ali Free Zone (South), Dubai, UAE

Tel: [phone]
Fax: [phone]

www.dewalt.ae
[e-mail]

N832057

01/20