DeWalt D28108-XE, D28127-XE, D28128-XE, D28154-XE Instruction Manual

ANGLE GRINDER

MODEL: D28108-XE,

D28128-XE, D28154-XE

D28127-XE,

2

Spindle Lock Button

On/Off Trigger Switch

When using power tools, always observe the safety regulations

applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the

following safety instructions before attempting to operate this product. Keep these instructions in

a safe place.

Cluttered areas and benches can cause accidents.

Consider work area environment.

or rain. Keep work area well lit. Do not use power tools in the presence of flammable liquids

or gases.

3.

Guard against electric shock.

Do not let children come into contact with the tool or extension

5.

When the tool is used outdoors, always use

extension cords intended for outdoor use and marked accordingly.

6.

Store idle tools.

When not in use, power tools must be stored in a dry place and

8.

Wear safety goggles.

Also use a face or dust mask in case the operations produce

dust or flying particles.

9.

Take appropriate

Secure workpiece.

Avoid unintentional starting.

switch. Be sure that the switch is released when plugging in.

Stay alert.

Watch what you are doing. Use common sense. Do not operate the tool when

you are tired.

3

Shut off power and wait for the tool to come to a complete standstill

accessories.

Always check that

adjusting keys and wrenches are removed from the tool before operating the tool.

The use of any accessories or attachments other than the ones recommended in this

from the socket. Keep the cord away from heat, oil and sharp edges.

tool cords at regular intervals and, if damaged, have them repaired by an authorised DeWALT

Any tool that cannot be

Check damaged parts.

of moving parts, breakage of parts and any other conditions that may affect its

operation. Have damaged guards or other defective parts repaired or replaced as instructed.

20.

This power tool is in accordance with the relevant safety regulations. To avoid danger, electric

appliances must only be repaired by qualified technicians.

This powertool is not intended for use by young children or infirm

Young children should be supervised to ensure that they do not play with this appliance.

If the supply cord is damaged, it must be

ADDITIONAL SPECIFIC SAFETY INSTRUCTIONS FOR GRINDERS.

light metal with a magnesium content exceeding 80% since this type of metal is flammable.

greater than the no-load speed of the tool specified on the nameplate.

technical data. Do not use any spacers to make a disc fit onto the spindle.

defective discs.

vibration or if any other defect occurs, stop the tool and check it to determine the cause.

or arcing motor brushes may ignite combustible materials.

work area.