Desa W26RO User Manual
W26RO
Mantel and Base
ASSEMBLY AND INSTALLATION INSTRUCTIONS
IMPORTANT: Read entire instruction sheet before
assembling or installing mantel kit.
These mantels are only approved for use with any
DESA Heating, LLC 26" electric and gas replace systems. Do not use mantel with any other product.
This mantel kit contains the following:
• Mantel pieces - unassembled and numbered as follows:
#1 Base
#2 Right Side Assembly
#3 Left Side Assembly
#4 Header
#5 Top
• Hardware Package
18 - 1 1/4" Wood Screws 114325-01
* Extra hardware may be included
Tools required:
• Power Screwdriver with #2 Phillips Bit
If any wood pieces are missing or damaged, contact the
dealer where you purchased this mantel for replacement. If
hardware is missing or damaged, contact DESA Heating, LLC
at 1-866-672-6040 for referral information. You can also visit
DESA Heating, LLC’s web site at www.desatech.com.
Note: Gather all mantel pieces together before assembling
mantel.
WARNING: Only use 1 1/4" screws to assemble
mantel. Damage to mantel will result if other screws
are used for this purpose.
www.desatech.com
ASSEMBLING MANTEL
IMPORTANT: More than one person is required to lift
assembled mantel. Lift mantel by leg assemblies. Lifting
by header or mantel top could damage mantel.
Right Leg
Assembly #2
Left Leg
Assembly #3
Use the following illustrations to assemble mantel. Use only
screws provided.
Header #4
Right Leg
Assembly #2
Left Leg
Assembly #3
Header
Assembly
Block
11/4"
Screws
11/4"
Screws
Base #1
Flush
Figure 2 - Installing Mantel Base
IMPORTANT: Align mantel left to right on base before installing. Mantel legs must be ush with back of mantel base before
installation. Use a tape measure to insure accuracy.
Mantel
Top #5
Figure 1 - Installing Header
Assembly
Blocks
11/4"
Screws
Figure 3 - Installing Top
IMPORTANT: Align mantel top left to right before installing.
Back of mantel leg must be ush with back of mantel top
before installation.
2
www.desatech.com
124408-01A
Loading...