Denver WCM-3004 User Guide

DENVER WCM-3004

Overview

1) Bottom Cover 2) microSD Slot

3) USB Connector 4) TV Out connector

5) PIR 6) Infrared Flash

7) Lens 8) GSM Antenna

9) 2 inch color LCD Display 10) Sound recorder

11) SIM card slot 12) Lock

13) Power switch 14) Battery Depot

15) Portable remote controller

Wild Camera

Quick Start Guide

The camera has 3 basic operation modes:

1. OFF mode: Power switch is at OFF position.

2. ON mode: Power switch is at ON position.

3. TEST mode: Power switch is at TEST position.
In the above three modes, the OFF mode is the specified safe mode when replacing the microSD or batteries and transporting the camera.

A. There are 3 modes under system setting for your selection.

a. Camera
It only takes photos at a time.
b. it only takes videos at a time.
c. Camera &Video.
It takes photo firstly, then takes videos.

B. There are also 2 ways to take photos or videos.

a. Manually by using the remote control
After sliding power switch to ‘TEST’, without any menu on the screen, press (OK) on the remote control to take
photos or videos.
b. Automatically
After sliding power switch to ON, the LED blinks 15s, then the camera takes photos or videos when the movement is detected.

C. Interval, timer, format, and password Instruction

1.Interval, There are two part, one is sensing, the other is taking picture/video, When camera is in on mode, camera starts sensing all the

ENG-1

time, if camera is set interval, the interval of taking picture/video is done

2. Timer, camera working time,

3. format, camera has internal memory, user can format interval memory and Micro-SD card

4. Password, 4 digital number

D. To view the photos of videos on the camera, please turn off the camera, slide power switch to Test, press right arrow key on remote
control to enter view model.

a. Photos
Press up or down on the remote control to view the previous of next photo.
b. Videos
Press left button on the remote control to start the video, press left button again to stop.
Note: Press OK to return to screen.

E. Please note, that this is not an error with the Camera:

Heavy rain, fog and drizzle (in the dark) will give white photos without motive.

F. Sending image via 2G/GSM/MMS/GPRS

Preparation

1. 2G/GSM Mobile Operator Service.

2. Format 2GB+ microSD card.

3. Computer(Vista, Windows 7, windows 8 system).

4. One SIM card without PIN lock

5. The SIM card should be able to send images via 2G/GSM/ GPRS/MMS network.

6. 6V power（4 or 8 AA Batteries, or 6V input power supply).

7. MMSCONFIG Program in CD.

8. Users need to ask the provider 2G MMS data (APN+account+password, MMSC+IP+PORT) or find this info on providers homepage.

9. 2G GPRS data for SMTP setting from provider (APN+account+password).

10.Sender Email server info (server+port+email+password).

MMS Setting Steps

1. Insert microSD card and SIM to camera,put batteries in cam, screw antenna to it
then turn camera to test mode,check there are signal bar and operator name on the camera screen. Then connect the camera to the PC
with the included USB cable

insert CD to computer, open and then double click

2. Choose or in Go to

table, select

3. Insert and

4. Fill in and or

5. Go to , choose

6. Click button and save as Parameter.dat to microSD card.

7. Plug USB cable from camera.

ENG-2