Denver TVD-2105 User Manual
TV-21 DVD
21 "(51cm)COLOUR TELEVISION
WITH DVD PLAYER
OPERATION MANUAL
PDF "pdfFactory Pro" www.fineprint.com.cn
Contents
Safety Precautions............................ |
|
|
1 |
Important Safety Instructions........... |
2 |
Location of Controls (Main Unit)........ |
|
|
3 |
Remote Control Unit.......................... |
|
|
4 |
Battery Installation........................... |
7 |
TEXT Operation................................. |
|
|
8 |
The Text Mode Operation .................. |
8 |
Hardware Operation ......................... |
9 |
TV REMOTE CONTROL ..................... |
9 |
Digit Button........................................ |
9 |
Program Button.................................. |
9 |
Picture Mode Button........................... |
9 |
Mute Button....................................... |
10 |
Volume Control Button........................ |
10 |
AV Button........................................... |
10 |
Power Standby Button......................... |
10 |
OSD Button........................................ |
10 |
COPY Button...................................... |
10 |
Sleep timer button.............................. |
11 |
OSD Menu ....................................... |
11 |
Picture Menu ..................................... |
11 |
Audio Menu........................................ |
11 |
Install Menu....................................... |
12 |
Setup Menu.................... ................... |
15 |
DVD Player Operation ....................... |
17 |
General Setup ................................... |
|
|
17 |
TV Display.......................................... |
|
|
17 |
Angle Mark......................................... |
|
|
17 |
OSD Language.................................. |
17 |
Digital Output...................................... |
|
|
18 |
Closed Captions................................. |
|
|
18 |
Screen Saver..................................... |
|
|
18 |
Analog Audio Setup.......................... |
|
|
18 |
Downmix............................................ |
|
|
18 |
Dolby Digital Setup........................... |
18 |
Dual Mono.......................................... |
|
|
18 |
Dynamic............................................. |
|
|
19 |
Video Setup....................................... |
|
|
19 |
Video Output...................................... |
|
|
19 |
Sharpness......................................... |
|
|
19 |
Brightness......................................... |
|
|
19 |
Contrast............................................ |
|
|
19 |
Preference Setup.............................. |
|
|
20 |
Audio................................................. |
|
|
20 |
Subtitle................................ |
20 |
Disc Menu............................ |
20 |
Parental............................... |
21 |
Password............................. |
21 |
Default................................. |
21 |
DVD Operations.................. |
22 |
Play Discs ........................... |
22 |
Pause Mode......................... |
22 |
OSD..................................... |
|
|
22 |
DVD Menu Play..................... |
22 |
Select with Number Button..... |
22 |
Audio Mode.......................... |
22 |
Fast Play............................. |
22 |
Slow Play............................. |
22 |
Repeat Mode........................ |
22 |
Repeat A-B........................... |
23 |
Subtitle................................ |
23 |
Angle .................................. |
23 |
Goto.................................... |
23 |
Display (Remain Time) .......... |
23 |
Zoom .................................. |
23 |
Program Mode...................... |
|
|
24 |
Mp3 Operation...................... |
25 |
Picture CD........................... |
25 |
Troubleshooting guide.......... |
|
|
26 |
Specifications....................... |
|
|
27 |
PDF "pdfFactory Pro" www.fineprint.com.cn
SAFETY PRECAUTIONS
CAUTION |
RISKOFELECTRIC SHOCK |
DONOTOPEN |
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The graphic symbols on the back cover of the set mean the following:
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
INSTALLATION
LOCATE the receiver in the room where direct light does not strike the screen. Total darkness
or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. ALLOW enough space between the receiver and the wall to permit proper ventilation.
AVOID excessive warm locations to prevent possible damage to the cabinet or component failure.
CONNECTION
This TV receiver can be connected to 200V-240V AC50Hz, NEVER connect to DC supply or any other power.
AUTOMATIC DEGAUSSING
All colour television receivers are sensitive to magnetic influences, usually caused by either moving the receiver from one place to another or using certain electrical appliances near the receiver. This residual magnetism as it is called, sometimes causes distortion which gives rise to "blotchy" areas of colour in the picture. To avoid these effects the receiver incorporates an automatic degaussing circuit which operates for a short while immediately each time the receiver is switched on using the mains switch. This circuit removes any residual magnetism in the metal parts of the picture tube and therefore ensures that each time the receiver is switched "ON" using the Mains switch, the purity of the colours displayed on the screen remain
true and lifelike. If the set is moved or faced in a different direction , the mains switch must be switched off at least 10 minutes in order that the automatic degaussing circuit operates properly.
1
PDF "pdfFactory Pro" www.fineprint.com.cn
IMPORTANT SAFETY INSTRUCTIONS
When using any electrical apparatus always observe safety regulations and use basic safety Precautions to reduce the risk of fire, electric shock and personal injury, including the following.
1.Read, Keep and Follow these instructions, heeding all Warnings.
2.Keep out of reach of young children. This apparatus is not suitable for use by young children or infirm persons without supervision. Young children must be supervised to ensure that
they do not play with the apparatus.
3.WARNING. Do not insert any objects into any openings of an electrical apparatus.
4.WARNING. Do not touch any moving parts of any electrical apparatus.
5.WARNING. Do not use this apparatus near water. To avoid the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or splashes.
6.WARNING. No objects filled with liquid, such as vases, shall be placed on any electrical apparatus.
7.Do not immerse in any liquid whilst in use or in cleaning. Clean only with a damp cloth,
dry with a dry towel. Do not use harsh abrasives as these may damage plastic parts.
8.DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions. Always allow a sufficient gap around the apparatus to avoid overheating.
9.DO NOT install near any heat sources such as radiators, gas heaters, stoves or other apparatus (including amplifiers) that produce heat. Do not leave in direct sunlight.
10.WARNING. Do not place any naked flame source, such as lighted candles on any electrical apparatus.
11.Connect to a suitable 200V-240V ~ 50 Hz power supply only.
12.Always unplug from the power source when any electrical apparatus is not in use.
13.Do not abuse or damage a power cord. If any power cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to
avoid a hazard. A replaceable cord must be replaced
with an authorised replacement from an authorised service agent only.
14.Only use attachments/accessories specified by the manufacturer.
15.Unplug this apparatus during lightening storms or when unused for long periods of time.
16.Attention is drawn to the environmental aspects of disposing of any battery.
17.Refer all servicing to qualified personnel. Servicing is required when the apparatus has
been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,does not operate normally, or has been dropped.
18.Do not attempt to service any double insulated apparatus. Double insulated apparatus requires specialist servicing and knowledge to retain the safety of the apparatus.
19.WARNING. Do not use any electrical apparatus outdoors. If any electrical apparatus is to be used
outdoors, use a suitable Isolating transformer or Electrical Safety Switch (RCD).
20.For household use only, this apparatus is not intended for commercial use.
21.If this apparatus is to be used by a third party, please supply these instructions with it.
22.No liability will be accepted for any personal injury or damage caused by failure to follow these instructions.
2
PDF "pdfFactory Pro" www.fineprint.com.cn
LOCATION OF CONTROLS
VIDEO |
AUDIO |
L |
R |
IN |
|
OUT |
|
L |
R |
1.Speaker
2.Remote control receiving window
3.Indicator
4.Menu Button
5.AV/ DVD Button
6.DVD Play Button
7.Open/Close Button
8.Channel Button(P-)
9.Channel Button(P+)
10.Volume Button(V )
11.Volume Button(V )
12.Main power switch
13.75 ohm Antenna Socket
14.AV in
15.AV out
16.Scart Connector( DVD output )
17.Audio digital Out Sockets (For DVD only)
18.Scart Connector (TV input and output)
19.Side AV
interface description:
1 Side AV: AV1 mode signal input in TV mode.
2 Rear AV interface: AV2 mode signal input and AV signal output in TV mode.
3 SCART1: in TV mode, containing one AV2 signal input, one RGB signal input and one AV output.
4 SCART2: in DVD mode, containing one AV (CVBS) output and one RGB output.
5 Optical fiber: in DVD mode, optical fiber signal (digital and audio) output.
6 Coaxial: in DVD mode, coaxial signal (digital and audio) output.
Note: 1. SCART1: Full Auto Scart input
After the SCART1 has been plugged input signal, please don t plug AV input signal (rear AV and side AV) again.
2. Because side AV and rear AV are all the AV1 signal input, so they don t connect signal at the same time.
3
PDF "pdfFactory Pro" www.fineprint.com.cn
REMOTE CONTROL UNIT
1.The arrangement area description of the remote controller buttons:
1) The gray buttons on the top of the remote controller are the remote control buttons area in the TV mode.
2) The blue buttons on the bottom of the remote controller are the remote control buttons area in the DVD mode.
3) R6 digit buttons (0-9) are the compositions buttons in TV and DVD modes.
Namely, In TV mode, which effect as the TV digit buttons;
In DVD mode, which effect as the DVD digit buttons.
2.The special buttons description of R2 (DVD), R3 (LED) and R4 (TV):
1) R4 (TV button): The remote control button in TV mode: Press the button, all buttons are functional in TV remote control buttons area. In DVD remote control buttons area, all buttons are non-functional.
At the same time, press any TV button, R3 (LED) sends twinkling red light.
2) R2 (DVD button): The remote control button in DVD mode: Press the button, all
buttons are functional in DVD remote control buttons area. In TV remote control buttons area,
there are only six buttons are functional:
R1 ( |
), R5 (AV/DVD), R8 ( |
), R11 (PP), |
R13 (VOL+) and R 15(VOL-), the other TV area are all non-functional.
At the same time, press any button of DVD area
and the above six special buttons of TV area, R3 (LED) sends twinkling green light.
3). R3 (LED): When the LED sends twinkling red light, the remote controller is in TV control mode;
When the LED sends green light, the remote controller is in DVD control mode.
4
PDF "pdfFactory Pro" www.fineprint.com.cn
3.The description of other remote control buttons
1).The description of TV remote control buttons area
R1( ): Stand-By Button
R5(AV/DVD): Press the button, which can switch over as follows:
TVàAV1à DVD(DVD PLAY)
á
R6(Digit button): TV channels select button or digit input button.
DVD digit input button.
R7(I/II):The button is non-functional.
R8( 
): Mute button: Press the Mute button to switch OFF the sound, press once again to switch ON the sound.
R9( 
): TV OSD button.
R10(-/--/---): TV 2-digital channel number switch button.
R11(PP): This button is used to select one of the five picture modes:
STANDARD, LIGHT, COLOR, SOFT and FAVORITE.
R12(CH+)/R21(CH-): TV channel increase /decrease button
R13(VOL+)/R15(VOL-):Volume increase/ decrease button.
R14(MENU):TV main menu button
R16(COPY): TV progarmmes copy button.
R17 (COL): TV menu color-changing button.
R18(CALE): Calendar button.
R19:Sleep button.
R20: ( 
) TV programs interchange button, i.e. the Q.V button.
5
PDF "pdfFactory Pro" www.fineprint.com.cn
2).The description of DVD remote control buttons area
R22(9) :DVD skip backward button. R23(:) :DVD skip forward button.
R24(8) :DVD search forward button. R25(7) :DVD search backward button. R26(SETUP):DVD menu setup button.
R27(r ):DVD up direction button. R28(MENU):DVD main direction button.
R29( v ):DVD left direction button.
R30(OK):DVD confirm bottom.
R31( w ):DVD right direction button.
R32(TITLE):DVD title menu display button
.
R 33(s ):DVD down direction button. R34(PROGRAM): DVD programmes button. R35( 
) :DVD open/colse button.
R36(;/4) :DVD pause/play button. R37(DISPLAY):DVD OSD button. R38(SLOW):DVD slow button.
R39( 
):DVD stop play button. R40(REPEAT):DVD repeat button. R41(A-B):DVD A-B chapter repeat button. R42(ANGLE):DVD angle switch button. R43(SUB-T):DVD subtitle switch button. R44(CLEAR):DVD clear button. R45(ZOOM):DVD zoom button.
R46(GOTO):DVD time chapter playback buttons.
R47(AUDIO):DVD sound switchover button. R48(PBC):DVD PBC switch button. R49(+10):Exceed 10 digital input button of DVD.
6
PDF "pdfFactory Pro" www.fineprint.com.cn
TEXT OPERATION
Teletext key description
Make the TV set to be in teletext mode, the following operation can be effective.
R50:(TEXT) Switch over between Text and TV mode
R51:(F/L) Toggles between LIST and FLOP
R7:(INDEX) Website key in text status
R10:(REVRAL) View TV program in text mode
R16:(MIX) Text mixed display button
R17:(STOP) Keep current text page
R18:(STORE) In EEPROM you can store 4 preferred teletext pages. Under List mode, press the colour key and then the desired 3 digit page number. Then press the STORE key to save this into EEPROM.
R19:(SUB-PAGE) Display attached text page
R20:(SIZE) Display attached text page
R52: Green colour link
R9: Red colour link
R11: yellow colour link
R14: Blue colour link
BATTERY INSTALLATION
Insert two "AAA" batteries as illustrated and replace the battery cover.
- |
+ |
+ |
- |
7
PDF "pdfFactory Pro" www.fineprint.com.cn
Loading...