Denver TFD-2211 Instruction Manual

TFD-2211

USER MANUAL (GB)

READ CAREFULLY

BEFORE OPERATION

IMPORTANT SAFETY INSTRUCTIONS

This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

Please read this manual carefully before using this product.

Before connecting the AC power cord to the DC adapter outlet ,make sure the

voltage designation of the LCD TV corresponds to the local electrical supply .

If you are unsure of your power supply , ask your local power company .

Never insert anything metallic into the cabinet openings of the liquid crystal display LCD TV/monitor;otherwise it may create the danger of electric shock.

To avoid electric shock, Never touch the inside of the LCD TV/monitor and adapter. Only a qualified technician should open the case of the LCD TV/monitor/adapter.

Never use your LCD TV/monitor/adapter if the power cord has been damaged . Do not allow anything to rest on the power cord, and keep the cord away from place where people can trip over it .

Be sure to hold the plug, not the cord, when disconnecting the adapter from an electric socket.

Openings in the LCD TV/monitor/adapter cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the LCD TV/monitor on a bed ,sofa ,rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the LCD TV/monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation.

Do not expose the LCD TV/monitor to extreme temperature conditions or to extreme humidity conditions.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

IMPORTANT SAFETY INSTRUCTIONS

Do not place the LCD TV/monitor on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. It is damaged if dropped, hit or scratched. Do not clean the front with keton-type materials (e.g.Acetone ),ethyl alcohol, toluene, ethy lacid, methyl, or chloride-these may damage the panel.

Locate your DC adapter near an easily accessible AC outlet.

If your LCD TV/monitor does not operate normally in particular, if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service enter.

High temperature can cause problems. Don`t use your LCD TV/monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.

Unplug the DC adapter when it is going to be left unused for an extended period of time .

To reduce the risk of fire or electric shock, and annoying interference, use the recommended accessories only.

If the LCD TV/monitor is broken, do not try to repair it yourself. Contact qualified service personnel.

Unplug your DC adapter from the AC outlet before any service.

，

Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical shook, or other hazards.

Following any service or repair, be sure the service technician performs safety checks to certify that your TFT-LCD TV/monitor is in safe operating order.

The apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.

CONTENT

PANEL BUTTON FUNCTIONS

Front panel Rear panel

EXTERNAL EQUIPMENT

Connecting diagram

REMOTE CONTROL

Remote buttons

LET S START'

Select source operation

ANALOG TV MENU SETUP

Picture

Analog TV setup

TELETEXT FUNCTION

Teletext function

AV, SCART COMPONENT SETUPAND

Video setting menu

VGA MENU SETUP

Picture

Monitor setup

DVD OPERATION

Brief introduction

Function introduction

Features

Playback

VCD, SVCD menu playback

Select track to play directly by number buttons

Repeat playback 25

Fast playback 26

Zooming the displayed frame

1 2

8 10

15 17

Top panel

Right panel

Battery installation

Sound Function

Sound

Function

Comparison between DVD and other discs

Compatible disc types

Volume control

Memory

Select language / audio

Repeat playback of selected segment

Play from the desired position

MPEG4 and JPEG file playing

16 18

CONTENT

DVD FUNCTION SETUP

DVD source selection 31 Preference setup 31

TROUBLE SHOOTING

Display troubleshooting

SPECIFICATIONS

Specifications

DISPLAY MODE

Display mode

ACCESSORIES

Accessories

General setup 31

Sound and TV troubleshooting

PANEL BUTTON FUNCTIONS

FRONT PANEL

Indicator(the indicator is

red when in standby mode, and green when in working normally)

IR sensor window

TOP PANEL

MENU P+ P- V+ V- SOURCE

STANDBY(To switch standby

mode and power-on mode.)

SOURCE(Select input source ) VOLUME DECREASE

VOLUME INCREASE

CHANNEL (decrease channel number)

CHANNEL (Increase channel number)

MENU(Enter or exit TV menu)

between

PANEL BUTTON FUNCTIONS

REAR PANEL

R input terminal Y/Pb/Pr audio input Pr

Pb Y VGA input terminal

VGA audio input SCART connecting terminal 12V DC input terminal

RIGHT PANEL

PLAY/PAUSE button STOP button EJECT button

EXTERNAL EQUIPMENT

CONNECTING DIAGRAM

NOTE

You should insert all necessary cables BEFORE plugging in power cord.

DVD or VCR player

REMOTE CONTROL

REMOTE BUTTONS

POWER

MUTE

S.MODE

PBC / PAGE+

P.MODE

CH-

TEXT MIX INDEX

CANCEL REVEAL HOLD SIZE

GOTO A-B REPEAT ANGLE

DVD-MENU TITLE PBC

S.PAGE

DISPLAY ZOOM-

SLEEP

678

CALLEXITSETUP

CH+

VOL-

PAGE+PAGE-

ZOOM+

SCALER

RECALL

SOURCE

DVD/USB

SUBTITLE

VOL+

I/II

AUDIO

To setup the PBC on/off in DVD mode browse the next page of teletext in

TV mode.analog

AUDIO

To change the audio language and sound track.

SUBTILE

To select languagesubtitle's

To display the program guide valid

or switch to JPEG display mode.

ZOOM+

To zoom in to the picture valid in DVD mode.

3 4

7 8

MUTE

Sound mute switch.

EJECT

Disc in/out,valid in DVD mode.

SCALER

Change picture ratio between and4:3 16:9

SLEEP

To setup the sleep timer.

Number button

To select program number.

RECALL

To swap between a preivous program and the current program in analog TV .

TWO-DIGIT number button

To switch between one or two-digit program number.

SOURCE

To select input source: TV,DVD,SCA RT, CO MPONENT and VGA .

CALL

To display the information on screen.

Left/Right cursor(menu adjustment )

To move leftward/ rightward or adjust the selected item in the menu, or adjust sound volume

OK button

To confirm the selections.

VOL+/-

To increase or decrease sound volume.

INDEX /

To display main content page when playing the teletext in analog TV. To stop playing valid in DVD mode.

DVD / USB / I/II

To switch between DVD mode or in NICAM/A2

MoNo channel in analog TV mode. "USB"-not used.

HOLD /

To stop teletext on current page in analog TV

SIZE /

To magnify teletext page in analog TV

REPEAT / YELLOW

To repeat playback(valid in DVD mode)Select

page in analog TV teletext mode

ANGLE/BLUE

To change camera angle in DVD mode when playing DVD disc/Select page in analog TV teletext mode

REMOTE CONTROL

POWER

To switch between standby mode and power-on mode.

P-MODE

To select picture mode: Standard, Dynamic, Soft, User(invalid in VGA mode).

S-MODE

To select sound field modes: Music, Film, News and User.

SETUP

To display setup menu, different in different source mode.

EXIT

To exit or back previous menu.

UP/DOWN cursor

To select upward/downward in the menu or change the channel, valid in analog TV .

CH+/-

To increase or decrease program number valid in analog TV .

MIX /

To display analog TV and teletext in the same time/pause playing/steps playback in pause mode, valid in DVD mode.

TEXT /

To enable or disable the function of teletext/ to playback,valid in DVD mode.

REVEAL /

To display the hidden teletext information in analog TV/to fast-forwards DVD playback, valid in DVD mode.

CANCEL /

To cancel teletext in analog TV/to fast backward playback, valid in DVD mode.

A-B / GREEN

To segment repeat (valid in DVD) /select page in analog TV teletext mode

GOTO/RED

To play from a certain time point(valid in DVD

mode)/select page in analog TV teletext mode

DVD-MENU / S.PAGE

To go to the menu of DVD menu,valid in DVD menu/To go to the sub page of teletext, valid in analog TV mode.

TITLE / PAGE-

To go to the menu of DVD menu,valid in DVD mode / browse the previous page of teletext in

TV mode.analog

POWER

MUTE

S.MODE

P.MODE

CH-

TEXT MIX INDEX

CANCEL REVEAL HOLD SIZE

GOTO A-B REPEAT ANGLE

DVD-MENU TITLE PBC

S.PAGE

DISPLAY ZOOM-

SLEEP

678

CALLEXITSETUP

CH+

VOL-

PAGE+PAGE-

ZOOM+

SCALER

RECALL

SOURCE

32 33

DISPLAY

To Display track time in DVD mode

ZOOM-

To zoom out to the picture valid in DVD mode.

DVD/USB

SUBTITLE

VOL+

I/II

AUDIO

REMOTE CONTROL

BATTERY INSTALLATION

Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of

the battery to the -/+ marks inside the battery compartment, as follows:

BATTERY LIFE

Normally, battery can be used one year.

If the remote control is still invalid when very near to the TV's remote sensor window, please use new battery.

Please use SUM-4(AAA) battery.

NOTES

Never use rechargeable battery.

Never charge, short-circuit, disassemble and heat the battery, or throw it into fire.

Pay attention not to fall or knock the remote controller, which will cause damage or function failure to it.

Do not use new and old battery together.

When not using the remote controller for a long time, please take out battery to avoid liquid leakage. Before replacing new battery, please clean the electrolyte in the remote controller.

If electrolyte splashes into body, please clean it with water.

CAUTION：

Please put battery in the place children cannot touch. If swallow by accident, please contact with the local doctor immediately.

LET S START'

After the unit has been suitably placed / fixed, on the desk or on the wall, and all necessary cables include power have connected, Press the [STANDBY] button on the remote control to make the unit switch to power-on mode - you will see the LED indicator turn green. Now you can enjoy the many features of your new TV.

V-

V+

P-

P+

SELECTING SOURCE OPERATION

You can select input source by using source menu. Press [SOURCE] button to show the

menu as follows:

The next you should do is:

INDICATOR

SOURCE

STANDBY

POWER

MUTE

S.MODE

P.MODE

SCALER

SLEEP

678

RECALL

CALLEXITSETUP

SOURCE

STANDBY

DVD

SCART

VGA

COMPONENT

The current source item is highlighted. Through press [ ] button on the remote control or [ CH+/CH- ] key on the left side of LCD TV to select your desire, Press [ ] button, [VOL+/VOL-] key or [OK] button to confirm your choice .

ANALOG TV MENU SETUP

This product can store up to 100-channel programs (0 ). You can select your

~ favorite channel through pressing [CH+/-] or number buttons, and you can scan and store all of the channels through manual or automatic mode.

In TV mode, press [SETUP] button into the main menu and the main menu will show

Analog

as follows:

Through pressing [ ] button on the remote control,

you can select main menu sections(main menu

sections consist of

TV SETUP","FUNCTION ")

"PICTURE","SOUND",

.Press

[ ] or [OK] button to enter this menu section.

Press [ ] button on the remote control to select

the item, and then press [ ] button to adjust

PICTURE

PICTURE MODE

BRIGHTNESS

CONTRAST

SATURATION

TINT

USER

parameter value. Press [SETUP] button to return

SETUP

to main menu sections.

SELECT

ADJUST

RETURN

PICTURE

Select " " and menu will show as follows:

Press [ ] button to select items and [ ]

button to adjust.

PICTURE

CONTRAST

SATURATION

TINT

SHARPNESS

COLOR TEMP.

NORMAL

Item

PICTURE MODE

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS

COLOR TEMP.

SELECT

ADJUST

RETURN

SETUP

Description

Select picture mode : "USER ", "STANDARD ", " DYNAMIC " and "SOFT ".

To adjust brightness.

To adjust contrast.

To adjust color saturation.

To adjust picture tint, only valid in N 3.58/N 4.43/PAL60 and display mode with V-scanning frequency equal 59.94 (please refer to P57).

To adjust picture sharpness.

Select color temperature mode: NORMAL , WARM and COOL .""""""

ANALOG TV MENU SETUP

SOUND

Press [ ] select " " and press [ ] or [OK] button to enter the following section:

SOUND

SOUND MODE

BALANCE

BASS

TREBLE

NICAM/A2

SELECT

Press [ ] button to select item and press [ ] button to adjust . The following is sound item description.

ADJUST

USER

MONO

SETUP

RETURN

Item

SOUND MODE

BALANCE

BASS

TREBLE

NICAM/A2

SRS

Select sound mode: "USER", "MUSIC", "FILM" and "NEWS".

To adjust balance of left and right channels.

To adjust bass.

To adjust treble.

Select the NICAM/A2 mode(please refer to the notes).

Select the SRS mode ( "Yes"or "No").

Description

NOTES

If you can receive Nicam/A2 signal, please do as below.

Select Nicam stereo, mono channel or bilingual through pressing [NICAM] button on the remote control. If Nicam/A2 signal is too weak, this unit will switch to mono channel automatically.

After selected mono channel, "MONO" will show on the screen; After selected bilingual I, "DUAL I" will show on the screen; After selected bilingual II, "DUAL II" will show on the screen and After selected stereo, "STEREO" will show on the screen.

Nicam/A2 function is only valid in analog TV mode while current program coming with Nicam/A2 signal.

+ 30 hidden pages